Manual.ly Logo

Worx WG583E.9 Manual

0.0 · 0 Ratings

PDF manual · 168 Pages

English

M: QW-35-FL
page

/ 168

Loading...
b8dc796c1639137a13d64ada17aab6cd29b8 page 9
9
Cordless Blower/Vac/Mulcher EN
safety glasses. Wear them
at all times while operating
the machine.
d) Operate the machine in a
recommended position and
only on a firm, level surface.
e) Do not operate the machine
on a paved or gravel surface
where ejected material
could cause injury.
f) Before using, always
visually inspect to see,
that the shredding means,
shredding means bolts and
other fasteners are secure,
the housing is undamaged
and that guards and
screens are in place.
Replace worn or damaged
components in sets to
preserve balance. Replace
damaged or unreadable
labels.
3) Operation
a) Before starting the
machine, make certain that
the feeding chamber is
empty.
b) Keep your face and body
away from the feed intake
opening.
c) Do not allow hands or any
other part of the body or
clothing inside the feeding
chamber, discharge chute,
or near any moving part.
d) Keep proper balance and
footing at all times. Do not
overreach. Never stand at a
higher level than the base of
the machine when feeding
material into it.
e) Always stand clear of the
discharge zone when
operating this machine.
f) When feeding material into
the machine be extremely
careful that pieces of metal,
rocks, bottles, cans or other
foreign objects are not
included.
g) If the cutting mechanism
strikes any foreign
objects or if the machine
should start making any
unusual noise or vibration,
immediately shut off the
power source and allow the
machine to stop. Remove
the battery pack from
the machine and take the
following steps before
restarting and operating the
machine:
i) inspect for damage;
ii) replace or repair any
damaged parts;
iii)check for and tighten any
loose parts.
h) Do not allow processed
material to build up in the

Chat with your Worx WG583E.9 manual using AI

Get instant AI answers from your Worx WG583E.9 manual

Ask anything about the Worx WG583E.9. Answers come from this manual, with the pages they are based on.

WG583E.9 Maintenance Schedule

Regularly
Clean the tool

Clean the tool regularly using mild soap and a damp cloth. Do not spray with water or use solvents that may damage the plastic.

Show in the manual (page 16)
Frequently
Check debris collector for wear

Check the debris collector frequently for signs of wear or deterioration to ensure safe operation.

Show in the manual (page 10)
Before each use
Inspect fasteners and guards

Visually inspect that shredding means, bolts, fasteners, housing, and guards are secure and undamaged before using the machine.

Before storage
Allow machine to cool

Always allow the machine to cool down completely before storing it in a dry place out of reach of children.

Show in the manual (page 11)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend WG583E.9?

Yes No

Frequently Asked Questions

A

The machine requires two 20V MAX batteries installed simultaneously to operate. It is recommended to use two identical batteries for balanced performance.

Is this answer helpful?

A

The Worx WG583E.9 reaches a maximum air speed of 335 km/h, providing strong airflow for clearing heavy debris efficiently.

Is this answer helpful?

A

No, this product is intended for residential outdoor use only. It should not be used inside enclosed spaces due to debris and noise.

Is this answer helpful?

A

The battery indicator light shows the status. One green light means very low charge, flashing twice means over-discharged, and no lights mean a battery is missing or defective.

Is this answer helpful?

A

No, the impeller continues to rotate for a few seconds after switching off. You must wait for all components to stop completely before touching them.

Is this answer helpful?

A

The device has a mulching ratio of 12:1, meaning it reduces the volume of leaves and debris by shredding them into twelve times smaller particles.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Powerful 40V MAX system with speeds up to 335 km/h
  • Versatile 3-in-1 function: blow, vacuum, and mulch
  • Convenient battery status indicator with multiple alerts
  • Lightweight design for easy maneuverability
  • Compatible with Worx PowerShare ecosystem
VS

Disadvantages

  • Requires two batteries for operation which may add cost
  • Machine runs for seconds after being switched off
  • Not suitable for heavy commercial use
  • Collection bag capacity may require frequent emptying
  • Battery must be fully charged before first use
M: QW-35-FL

Product Specification

Battery

40V (2x20V), Li-Ion

Airflow

338.5 cu ft/min

Airflow Speed

208.16 mph

Mulching Function

Volume reduction 12:1

Collection Volume

9.53 gal

Noise Level

99.7 dB(A)

Weight

8.38 lbs (without battery)

Package Contents

Without charger and battery, includes nozzle, carrying strap, casters, additional handle

M: QW-35-FL

Product Description

Worx WG583E.9 40V PowerShare Battery Leaf Blower/Sweeper Solo Review

The Worx WG583E.9 40V PowerShare Battery Leaf Blower/Sweeper Solo is a versatile outdoor tool designed to simplify yard maintenance for residential users. This cordless device combines the power of blowing with the convenience of vacuuming and mulching, all powered by the Worx PowerShare system. It features a robust lithium-ion battery setup that delivers up to 335 km/h of air speed, making it effective at clearing leaves, grass clippings, and light debris from driveways and lawns.

Operating on a 40V MAX system (two 20V batteries), this unit offers significant power without the hassle of cords or gas engines. The machine includes a high-speed setting ideal for vacuum mode, ensuring maximum suction capacity of up to 575 m3/h. Users can easily switch between blow and vacuum modes by swapping attachments like the blower tube, vacuum tubes, wheels, and the 35-liter collection bag. The mulching capability allows you to shred leaves into fine pieces at a 12:1 ratio, reducing the volume of waste in your collection bag.

Safety is a top priority with this model. The unit comes equipped with essential safety features such as an interlocked guard for the shredding mechanism and a clear battery status indicator. The battery indicator provides real-time feedback on charge levels through LED lights, alerting users if batteries are over-discharged, overheating, or overloaded. Proper assembly is straightforward, requiring only the installation of two compatible batteries and the selected nozzle or tube configuration. Always remember to remove the batteries before performing any maintenance or clearing blockages to ensure personal safety.

This tool is perfect for homeowners looking for an eco-friendly, quiet, and efficient way to manage their garden waste. With a weight ranging from 2.9 kg in blow mode to 5.1 kg in vacuum mode, it remains manageable for extended use. Remember to store the device in a dry place and keep the battery terminals clean for optimal performance.

Important Notes

  • Always wear eye and ear protection when operating.
  • Do not operate on paved surfaces where debris could be ejected dangerously.
  • Ensure the machine is completely cool before storing.
M: QW-35-FL

© Copyright 2026 Manual.ly