Manual.ly Logo

Worx WG349E Manual

0.0 · 0 Ratings

PDF manual · 200 Pages

English

M: gpt-5.6-terra
page

/ 200

Loading...
dbd7f4d4a2654cc9a0430f6507f87f7aa12d page 9
9
20V Cordless Pole Saw
EN
PRODUCT SAFETY
ORIGINAL INSTRUCTIONS
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING: Read all safety warnings
and all instructions. Failure to follow the
warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust or
fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do not
use any adapter plugs with earthed (grounded)
power tools. Unmodified plugs and matching
outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators. There is
an increased risk of electric shock if your body is
earthed or grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging
the power tool. Keep cord away from heat,
oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric
shock.
e) When operating a power tool outdoors, use
an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces
the risk of electric shock.
f) If operating a power tool in a damp
location is unavoidable, use a residual
current device (RCD) protected supply. Use
of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool while you
are tired or under the influence of drugs, alcohol
or medication. A moment of inattention while
operating power tools may result in serious
personal injury.
b) Use personal protective equipment.
Always wear eye protection. Protective
equipment such as dust mask, non-skid safety
shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal
injuries.
c) Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to power source and/or battery
pack, picking up or carrying the tool.
Carrying power tools with your finger on the
switch or energising power tools that have the
switch on invites accidents.
d) Remove any adjusting key or wrench
before turning the power tool on. A wrench
or a key left attached to a rotating part of the
power tool may result in personal injury.
e) Do not overreach. Keep proper footing
and balance at all times. This enables
better control of the power tool in unexpected
situations.
f) Dress properly. Do not wear loose clothing
or jewellery. Keep your hair, clothing and
gloves away from moving parts. Loose clothes,
jewellery or long hair can be caught in moving
parts.
g) If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used. Use of dust collection can reduce dust-
related hazards.
4) Power tool use and care
a) Do not force the power tool. Use the
correct power tool for your application.
The correct power tool will do the job better and
safer at the rate for which it was designed.
b) Do not use the power tool if the switch
does not turn it on and off. Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
c) Disconnect the plug from the power
source and/or the battery pack from the
power tool before making any adjustments,
changing accessories, or storing power
tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e) Maintain power tools. Check for
misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tool’s operation.
If damaged, have the power tool repaired before
use. Many accidents are caused by poorly
maintained power tools.

Chat with your Worx WG349E manual using AI

Get instant AI answers from your Worx WG349E manual

Ask anything about the Worx WG349E. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend WG349E?

Yes No

Frequently Asked Questions

A

The WG349E version includes a WA3551 2.0Ah battery, WA3880 charger, shoulder strap, bar and chain sheath, and pole saw head attachment. Bar and chain oil is not included and must be added before operation.

Is this answer helpful?

A

The telescopic pole adjusts from 1.8 m to 2.3 m. With the user's reach, the stated total working reach is up to 3.6 m. Use only the minimum extension needed and maintain secure footing.

Is this answer helpful?

A

The saw has a 20 cm guide bar and an 18 cm cutting length. It is intended for pruning branches, trees, wooden beams, planks, and similar wood materials. Cut one branch or log at a time and avoid forcing the tool.

Is this answer helpful?

A

Yes. The saw head locks into three positions: 0, 15, and 30 degrees. Adjust it only when the tool is off, ensure it is fully locked, and never operate it with an unlocked head.

Is this answer helpful?

A

Yes. Fill the 80 ml reservoir with recommended bar and chain oil before use. The automatic oiler lubricates the chain during operation. Running the tool without oil or with an empty tank can cause serious damage.

Is this answer helpful?

A

Wear eye, hearing, head, hand, and foot protection. Use both hands, keep firm footing, stay clear of falling branches, and remain at least 3 m from power lines. Do not work from a ladder, in a tree, or in wet conditions.

Is this answer helpful?

M: gpt-5.6-terra

Advantages and Disadvantages

Advantages

  • Includes a 2.0Ah PowerShare battery and charger for a ready-to-start cordless package.
  • Telescopic pole provides up to 3.6 m total reach for pruning higher branches from the ground.
  • Adjustable saw head offers 0, 15, and 30 degree positions for more versatile cutting angles.
  • Automatic chain lubrication, oil level window, and chain tensioning knob simplify routine care.
  • Shoulder strap and 180 degree rotating rear handle support comfort and control during overhead work.
VS

Disadvantages

  • Bar and chain oil is required before use but is not included.
  • The 20 cm bar and 18 cm cutting length are better suited to lighter pruning than large timber.
  • At about 3.7 kg with bar and chain, overhead use may become tiring over extended sessions.
  • Battery runtime depends on cutting intensity, branch size, and pauses between cuts.
  • Safe operation requires regular chain tension checks, cleaning, lubrication, and protective equipment.
M: gpt-5.6-terra

Product Specification

Type

Pole pruner

Battery

1x battery (20 V, 2.0 Ah, lithium-ion)

Bar Length

7.87 in

Chain Speed

16.4 ft/s

Chain Pitch

3/8 in

Chain Oil Tank

2.71 fl oz

Features

Additional handle, adjustable head (30 degrees), telescopic (5.91-7.55 ft), tool-free chain tensioning, automatic chain lubrication, chain brake, spike bumper

Vibration Level

6.0 ft/s2

Charging Time

1 hr

Noise Level

93 dB(A)

Weight

8.16 lb (including battery)

Included

Charger, 1x battery, guide bar, saw chain, bar cover, shoulder strap

M: gpt-5.6-terra

Product Description

Worx WG349E PowerShare Cordless Pole Saw incl. 2.0Ah Battery - Read, Download & Print Free

The Worx WG349E PowerShare Cordless Pole Saw incl. 2.0Ah Battery is designed for homeowners who want a practical way to trim high branches without relying on a petrol-powered tool or a mains cable. Its 20V Max PowerShare battery system delivers cordless freedom for routine pruning, light tree maintenance, and cutting timber around the garden. The supplied 2.0Ah battery and charger make this version ready for use after charging, while the compact 20 cm guide bar provides an 18 cm cutting length for manageable branches.

Reach, control, and adaptable cutting angles

A telescopic pole extends from 1.8 m to 2.3 m, giving the tool a total reach of up to 3.6 m. This helps users access overhead growth while remaining on stable ground. The saw head can be set at 0, 15, or 30 degrees, making it easier to approach branches at a suitable angle. A rotating rear handle adds further flexibility, helping the operator find a comfortable and balanced grip during different cutting tasks.

The pole saw weighs approximately 3.7 kg with the bar and chain fitted. Its included shoulder strap supports the tool while working overhead and can reduce fatigue during longer pruning sessions. The chain speed of 5.0 m/s is intended for controlled cutting rather than heavy forestry work, so it is best suited to regular garden maintenance and smaller branches.

Chain care and everyday usability

The WG349E uses automatic chain lubrication to support smooth cutting and help protect the bar and chain. Before use, the 80 ml oil reservoir must be filled with suitable bar and chain oil, which is not included. An oil level window makes it easier to check supplies during work. The chain tensioning knob allows users to set and review chain tension without complicated adjustment procedures, although a new chain should be checked regularly as it stretches during initial use.

Safety-focused features include a lock-off button, a low-kickback chain, a reduced-kickback guide bar, and clear guidance for two-handed operation. Protective gloves, eye protection, hearing protection, head protection, and sturdy footwear are recommended. Operators should never use the saw from a ladder, near overhead power lines, or directly beneath a branch being cut.

Notes

  • The WG349E includes a WA3551 2.0Ah battery and WA3880 charger.
  • Bar and chain oil must be purchased separately.
  • Keep the chain sharp, correctly tensioned, and well lubricated for best results.
  • The tool is intended for wood only, not mineral materials.
M: gpt-5.6-terra

© Copyright 2026 Manual.ly