Manual.ly Logo

Worx WG284E Manual

0.0 · 0 Ratings

PDF manual · 108 Pages

English

M: OA-GPT-54-NAN
page

/ 108

Loading...
92c8952904c31c71b30d1bc396523e68ce67 page d
Hedge trimmer EN
13
No light is
illuminated.
At least one battery is not
fully installed or battery
may be defective.
Only one light is
flashing twice per
cycle.
At least one battery is
over discharged (please
refer to the battery charge
condition), please recharge
the two batteries at once
before use again or storage.
Only one light is
flashing three times
per cycle.
At least one battery is hot,
wait for them cool down
before start again.
Only one light is
flashing four times
per cycle.
The machine is over load.
Remove tool from cutting
area and try again.
MAINTENANCE
Remove the battery from Hedge trimmer
before carrying out any adjustment, servicing
or maintenance.
There are no user serviceable parts in your power
tool. Never use water or chemical cleaners to
clean your power tool. Wipe clean with a dry cloth.
Always store your power tool in a dry place. Keep
the motor ventilation slots clean. Keep all working
controls free of dust.
ENVIRONMENTAL
PROTECTION
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with your
Local Authority or retailer for recycling advice.
DECLARATION OF
CONFORMITY
We,
Positec Germany GmbH
Grüner Weg 10, 50825 Cologne, Germany
Declare that the product
Description WORX Cordless Hedge Trimmer
Type WG284E WG284E.9 (250-299-
designation of machinery, representative of
cordless hedge trimmer)
Function Trimming hedges and brushes
Complies with the following directives,
2006/42/EC
2014/30/EU
2011/65/EU&(EU)2015/863
2000/14/EC amended by 2005/88/EC
2000/14/EC amended by 2005/88/EC:
- Conformity assessment procedure as per
Annex V
- Measured sound power level 93.1 dB (A )
-
Declared guaranteed sound power level 94 dB(A)
Standards conform to,
EN 60745-1
EN 60745-2-15
EN ISO 3744
EN 55014-1
EN 55014-2
The person authorized to compile the technical file,
Name Marcel Filz
Address Positec Germany GmbH
Grüner Weg 10, 50825 Cologne, Germany
2018/9/26
Allen Ding
Deputy Chief Engineer, Testing & Certification
Positec Technology (China) Co., Ltd
18, Dongwang Road, Suzhou Industrial
Park, Jiangsu 215123, P. R. China

Chat with your Worx WG284E manual using AI

Get instant AI answers from your Worx WG284E manual

Ask anything about the Worx WG284E. Answers come from this manual, with the pages they are based on.

WG284E Maintenance Schedule

Before each use
Inspect blades for damage

Check cutting blades regularly for damage and repair immediately if damaged.

After each use
Clean the tool

Wipe clean with a dry cloth. Keep motor ventilation slots and working controls free of dust. Do not use water or chemical cleaners.

Show in the manual (page 13)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend WG284E?

Yes No

Frequently Asked Questions

A

The tool is designed to run only with two battery packs installed. It is recommended to use the same two batteries and charge them at the same time. If you use two batteries with different power levels, the trimmer will operate only up to the lower common denominator.

Is this answer helpful?

A

The manual explains several LED patterns. Multiple green lights indicate remaining charge, while only one green light suggests over-discharge risk. No lights can mean a battery is not fully installed or is defective. Flashing patterns indicate over-discharged batteries, overheating, or overload conditions that require removing the tool from the cutting area.

Is this answer helpful?

A

No. The manual specifically warns not to operate the hedge trimmer without attaching the guard and the front handle. Missing or damaged parts should be replaced or repaired before use to reduce the risk of serious injury.

Is this answer helpful?

A

Technical data lists a 60 cm cutting length and a 27 mm blade gap, with a 2200/min no-load speed. For best results, the manual advises letting blades reach full speed before starting a cut.

Is this answer helpful?

A

Charging time is listed as approximate. For a 2.0 Ah battery pack, one battery takes about 0.5 hours, while charging two batteries together takes about 1 hour. Use the specified charger model referenced in the manual.

Is this answer helpful?

A

Remove the battery before any adjustment, servicing, or maintenance. The tool should be cleaned with a dry cloth, and motor ventilation slots and controls should be kept free of dust. For blade care, use only the recommended standard lubricating oil (WD-40).

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • 40V MAX PowerShare system (2x20V MAX) for cordless trimming performance at 2200/min no-load speed.
  • 60 cm cutting length with 27 mm blade gap for efficient hedge shaping and side trimming.
  • Rotating rear handle helps you find a comfortable working position with two-handed control.
  • Battery status LED indicators help monitor charge, over-discharge, overheating, and overload conditions.
  • Includes clear safety guidance: guard and front handle required, stop before clearing jams, transport with blade cover.
VS

Disadvantages

  • Runs only when two battery packs are installed, and mixed power batteries reduce performance to the lower common level.
  • Charging time depends on the pack count; two batteries take longer than charging one.
  • Blade maintenance requires proper lubrication (WD-40) to avoid damage.
  • Not meant for wet conditions, and operation is discouraged in rain or on wet hedges.
  • Weight varies by configuration, which can affect comfort during longer sessions.
M: OA-GPT-54-NAN

Product Specification

Type

Hedge Trimmer

Cutting Thickness

1.06 in

Special Features

Additional Handle

M: GO-GEM-FL-25

Product Description

Worx WG284 40V PowerShare Cordless hedge trimmer Manual

If you are looking to shape hedges with more control and less fuss, the Worx WG284 40V PowerShare cordless hedge trimmer is designed for everyday domestic trimming. Powered by a 40V MAX system (2x20V MAX), it delivers a fast no-load speed of 2200/min, making quick work of new growth and routine maintenance around the yard. With a 60 cm cutting length and a 27 mm blade gap, the tool is well-suited for both top shaping and side detailing.

One standout feature highlighted in the Worx WG284 40V PowerShare Cordless hedge trimmer Manual is the rotating rear handle. This lets you adjust your grip and working position for different angles, helping you keep two-handed control as you follow the hedge line. For added safety, operation instructions emphasize using the safety guard and front handle, and keeping the cutter blade stopped when clearing jammed material or preparing to transport and store.

Battery status is also covered clearly, with an LED indicator that shows charge levels and alerts you to conditions like over-discharge, overheating, or overload. The tool is designed to run only when two battery packs are installed, and it is recommended to use and charge the same two batteries together. This approach helps maintain consistent power output during trimming sessions.

From a comfort and performance standpoint, the manual includes practical guidance for technique. It recommends inspecting the area first, removing foreign objects that could snag the blades, and allowing the blades to reach full speed before cutting. For cutting results, it suggests wide sweeping motions for top trimming and starting side cuts from the bottom and working upward for a more uniform hedge shape.

Key takeaways

  • 40V MAX (2x20V MAX) cordless system for home hedge trimming with 2200/min no-load speed.
  • 60 cm cutting length and 27 mm blade gap for steady shaping of hedges and bushes.
  • Rotating rear handle for better angles and two-handed control while trimming.
  • LED battery status alerts for charge, over-discharge, overheating, and overload.
  • Safety-first operation: use guard and front handle, and stop before clearing jams.

Notes

  • Wear eye and hearing protection, and use gloves for thorny growth.
  • Do not operate in rain or on wet hedges.
  • For blade care, use the recommended standard lubricating oil (WD-40) and store with the blade sheath in place.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly