Manual.ly Logo

Worx WA3867 Manual

5.0 · 1 Ratings

PDF manual · 8 Pages

English

M: QW-35-FL
page

/ 8

Loading...
289d078794a682ef9d3d747e7b9904eb0a1e page 6
6
Battery Charger WA3867
Green flash
- - - - - - Charging
BATTERY TEMPERATURE PROTECTION
This charger has a battery temperature protection
feature. When the charger detects a battery pack
that is too hot or cold (the light will be red and
flash), it automatically activates the protection
circuit, and suspends charging until the battery pack
has reached the correct temperature. The charging
process will then automatically begin (the light will
be green and flash). This feature ensures maximum
battery life.
LEAVING THE BATTERY PACK IN THE CHARGER
If a fully charged battery pack is left in the charger,
the Light will remain green. The battery pack will
remain charging with a maintenance trickle current.
DEFECTIVE BATTERY PACKS
This charger will detect a defective battery pack.
When a defective battery pack is inserted into the
charger, the charger will try to repair it. This process
will last about 30mins (the light will be green and
flash). If the repair is successful, the charger will
automatically begin to charge the battery pack to
the highest capacity possible (the light will be green
and flash). If the light becomes solid red, the battery
pack is dead.
NOTE: Repaired battery packs are still usable but
should not be expected to perform as much work as
new battery packs.
IMPORTANT CHARGING NOTES:
1. For a new battery or a battery that has been
in storage for sometime, please recharge the
battery before use. If you want to store the
battery for a long time, please fully charge the
battery pack to ensure maximum battery life.
2.
Longer life and better performance can be
obtained if the battery pack is charged when the
air temperature is between (18
0
-24
0
C). Do not
charge the battery pack in air temperatures below
4.5
0
C, or above 40.5
0
C. This is important as it can
prevent serious damage to the battery pack.
3. Never freeze your charger or immerse charger
in water or any other liquid.
4. When the battery pack fails to produce sufficient
power on jobs that were previously done easily,
please recharge your battery, do not continue
to use under this condition. You may charge a
partially used pack whenever you desire with
no adverse affect on the battery pack.
5. When charging it is normal that the charger and
battery pack may become warm to touch.
6. If the battery pack does not charge properly:
a. Check current at power outlet by plugging in
another appliance.
b. Plug and unplug to check whether the charger is
ok
c. Check whether the battery has been damaged
d. Move the charger and battery pack to a location
where the surrounding air temperature is
approximately 18
0
-24
0
C.
e. If the charging problem persists, take the tool,
battery pack and charger to an authorized
service center.
f. Under certain conditions, when the charger is
plugged into the power supply, the exposed
charging contacts inside the charger can be
shorted by foreign material. Foreign materials
of a conductive nature such as metallic particles
should be kept away from charger cavities.
Always unplug the charger from the power
supply when there is no battery pack in the
charger or before attempting to clean.
PROBLEM SOLUTION
1. I CANNOT FIT THE BATTERY INTO THE
BATTERY CHARGER. WHY?
a) Check if the charger and the battery pack are
specifically designed for working together.
b) The battery can be inserted into the charger
only in one direction. Turn the battery around
until it can be inserted into the slot, the
indicator light should be green and flash when
the battery is charging.
2. REASONS FOR DIFFERENT CHARGING
TIMES
The charging time can be affected by many reasons
which are not defects in your product.
a) If the battery pack is only partly discharged it
may be re-charged in less than rated charging
time.
b) If the battery pack and ambient temperature are
very cold/ hot, it may take longer to re-charge.
Please find an appropriate environment with
proper air temperature to start charging.
c) If the battery pack is very hot, remove battery
pack from the charger and allow battery pack
to cool first to ambient temperature and then
recharging can be started.
MAINTENANCE
Remove the plug from the socket before
carrying out any adjustment, servicing or
maintenance.
Your battery charger requires no additional lubrication
or maintenance. Never use water or chemical
cleaners to clean your charger. Wipe clean with a dry
cloth. Always store your charger in a dry place.

Chat with your Worx WA3867 manual using AI

Get instant AI answers from your Worx WA3867 manual

Ask anything about the Worx WA3867. Answers come from this manual, with the pages they are based on.

WA3867 Maintenance Schedule

After each use
Disconnect charger from mains after charging

After charging, disconnect the battery charger from the supply mains. Then remove the chassis connection and then the battery connection.

Regularly
Keep charger slots free of foreign objects

Ensure that the connection between the battery charger and battery is correctly positioned and is not obstructed by foreign bodies.

As needed
Wipe clean with a dry cloth

Never use water or chemical cleaners to clean your charger. Wipe clean with a dry cloth.

M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend WA3867?

Yes No
0
User Pic

Dylan Anderson

7 months ago

Does this fast charger actually reduce charging time for the Worx mower robot compared to the standard one?

0
User Pic

Manual.ly

7 months ago

Yes, testing confirms that using this fast charger significantly reduces charging time. While the standard cycle takes approximately 180 minutes, this device can lower the duration to around 45 minutes, making it a highly efficient upgrade for your machine.

M: QW-35-FL
M: QW-35-FL
0
User Pic

AutEt30

6 months ago

Is this charger compatible with all Worx robotic mower models or just specific ones?

M: QW-35-FL

Frequently Asked Questions

A

According to the manual, a 2.0Ah battery pack typically takes approximately 25 minutes to reach full charge under normal conditions.

Is this answer helpful?

A

A flashing red light indicates that the battery temperature is out of the safe range, either too hot or too cold, triggering the protection circuit.

Is this answer helpful?

A

No, the Worx WA3867 is designed exclusively for Worx battery packs. Using incompatible batteries can cause damage or safety hazards.

Is this answer helpful?

A

Yes, the charger provides a maintenance trickle current to keep the battery topped off, though removing it is often recommended for long-term storage.

Is this answer helpful?

A

Check the orientation; the battery can only be inserted one way. Also ensure the contacts are clean and the charger is compatible with the specific battery model.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Intelligent temperature protection prevents damage from extreme heat or cold
  • Fast charging capabilities support multiple battery capacities up to 6.0Ah
  • Universal input voltage allows use in various countries without adapters
  • Clear LED indicators provide immediate status updates on charging progress
VS

Disadvantages

  • Requires specific Worx battery models and may not work with third-party packs
  • Charging time varies significantly based on battery capacity and condition
  • Cannot charge non-rechargeable batteries which poses a risk if misused
M: QW-35-FL

Product Specification

Type

Charger

Compatible with

Worx 20V Powershare System

Battery Voltage

20 V

Battery Type

Li-Ion

Weight

1.54 lbs

M: QW-35-FL

Product Description

Unlocking the Power of Worx WA3867 20V PowerShare Charger

The Worx WA3867 20V PowerShare Charger stands as a cornerstone for users of the Worx power tool ecosystem. Designed to keep your cordless tools running efficiently, this charger offers a seamless charging experience tailored specifically for Worx battery packs. Whether you are tackling home improvement projects or professional construction tasks, having a reliable charging station is essential. The device supports a wide range of capacities, from 1.3Ah to 6.0Ah, ensuring that both small and large batteries receive the optimal charge they need.

One of the standout features of this unit is its intelligent charging system. It automatically detects the battery status and adjusts the charging process accordingly. If the battery is too hot or too cold, the charger activates a temperature protection mode, suspending operation until the battery reaches a safe operating range. This not only safeguards the battery but also extends its overall lifespan. The indicator lights provide clear feedback, flashing green during the charging phase and turning solid green when the battery is fully charged. A red light indicates potential issues, such as a defective battery or extreme temperatures, allowing users to address problems immediately.

Safety is paramount in the design of the Worx WA3867. Built with double insulation and strict adherence to safety standards, it minimizes risks associated with electric shock and fire. The charger requires no maintenance other than keeping it clean and dry. It operates on a universal input voltage of 100-240V, making it versatile for use in various regions. By following the recommended charging procedures and maintaining the correct ambient temperature between 18°C and 24°C, users can maximize the performance and longevity of their Worx battery packs.

Important Notes

  • Always allow the battery to cool down before recharging if it has been exposed to heat.
  • Do not leave the charger unattended for extended periods while charging.
  • Ensure the charging contacts remain free of dirt and debris to prevent short circuits.
  • Store the charger in a dry, frost-free environment to protect internal components.
M: QW-35-FL

© Copyright 2026 Manual.ly