Manual.ly Logo

Worx Sonicrafter WX693.9 Manual

0.0 · 0 Ratings

PDF manual · 140 Pages

English

M: QW-35-FL
page

/ 140

Loading...
b973a98d458b2fa23e6e31751e699c9905bd page 6
6
20V Cordless Oscillating Tool EN
TABLE OF CONTENTS
1. PRODUCT SAFTY
2. COMPONENT LIST
3. TECHNICAL DATA
4. OPERATING INSTRUCTIONS
5. WORKING HINTS FOR YOUR TOOL
6. MAINTAIN TOOLS WITH CARE
7. ENVIRONMENTAL PROTECTION
8. DECLARATION OF CONFORMITY
1. PRODUCT SAFETY
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING: Read all safety warnings,
instructions, illustrations and
specifications provided with this power tool.
Failure to follow all instructions listed below may result
in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
f) If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and
use common sense when operating a power
tool. Do not use a power tool while you are
tired or under the influence of drugs, alcohol
or medication. A moment of inattention while
operating power tools may result in serious
personal injury.
b) Use personal protective equipment. Always
wear eye protection. Protective equipment such
as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions
will reduce personal injuries.
c) Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools with
your finger on the switch or energising power tools
that have the switch on invites accidents.
d) Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
e) Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair and clothing away
from moving parts. Loose clothes, jewellery or
long hair can be caught in moving parts.
g) If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used. Use of dust collection can reduce dust-
related hazards.
h) Do not let familiarity gained from frequent
use of tools allow you to become complacent
and ignore tool safety principles. A careless
action can cause severe injury within a fraction of a
second.
4) Power tool use and care
a) Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the
rate for which it was designed.
b) Do not use the power tool if the switch does

Chat with your Worx Sonicrafter WX693.9 manual using AI

Get instant AI answers from your Worx Sonicrafter WX693.9 manual

Ask anything about the Worx Sonicrafter WX693.9. Answers come from this manual, with the pages they are based on.

Sonicrafter WX693.9 Maintenance Schedule

After use / When dirty
Clean the tool with a dry cloth

Never use water or chemical cleaners. Wipe clean with a dry cloth and store in a dry place.

Show in the manual (page 12)
As needed
Keep motor ventilation slots clean

Ensure ventilation slots are free of dust to prevent overheating. Sparks visible through slots are normal.

Show in the manual (page 12)
Regularly
Replace accessories

Replace the accessory regularly to maintain optimum working efficiency.

Show in the manual (page 12)
Before/During use
Check blade sharpness

Always keep cutting tools and blades sharp and clean for safe operation and better control.

M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend Sonicrafter WX693.9?

Yes No

Frequently Asked Questions

A

You should use only designated battery packs specifically designed for this equipment. Using incompatible batteries may create a risk of injury or fire. Refer to the manual for approved models like the WA3550 or WA3551 series.

Is this answer helpful?

A

Wipe the tool with a dry cloth. Never use water or chemical cleaners. Keep handles and grasping surfaces free from oil and grease to ensure safe control.

Is this answer helpful?

A

Yes, it is intended for non-ferrous metals and thin sheet metal. Use appropriate saw blades and maintain high oscillation frequency for efficient performance on these materials.

Is this answer helpful?

A

If the tool becomes too hot especially at low speed, set the speed to maximum and run it with no load for two to three minutes to cool the motor.

Is this answer helpful?

A

No, the power tool requires no additional lubrication or maintenance. It contains no user serviceable parts that need lubrication.

Is this answer helpful?

A

Keep the battery pack out of reach of children and away from metal objects like keys or coins. Do not store it in direct sunlight or damp locations.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Variable speed dial allows optimization for different materials and accessories.
  • Compact 0.9 kg weight reduces user fatigue during prolonged projects.
  • LED light acts as a battery capacity indicator for better workflow management.
  • Universal accessory interface supports tools from other major brands.
  • Compatible with multiple 20V battery packs from the PowerShare system.
VS

Disadvantages

  • No charger or battery pack included in the solo package configuration.
  • Loud operation requires ear protection due to 73dB sound pressure level.
  • Requires sharp cutting edges to prevent binding and motor overload.
  • Not suitable for submersion in water or humid environments without precautions.
  • Motor may overheat if used continuously at very low speeds.
M: QW-35-FL

Product Specification

Battery

20V, Li-Ion

No-load speed

5,000-18,000 RPM

Oscillation angle

3.6 degrees

Tool mounting

Quick-change system

Features

Speed regulation, LED work light

Weight

1.98 lbs

Scope of delivery

without charger and battery, accessory kit

M: QW-35-FL

Product Description

Worx Sonicrafter 20V Cordless Multi-Tool Overview

The Worx WX693.9 Sonicrafter 20V PowerShare Cordless Multi-Tool Solo + Accessories Manual provides essential guidance for users of this high-performance device. Although the technical documentation references the WX696 model, the functional specifications apply broadly to this power series. This tool is designed for diverse applications including sawing, remodeling, and fastener removal. It operates with a variable speed dial allowing users to adjust oscillation frequencies from 5000 to 18000 per minute. The maximum voltage reaches 20 volts, providing ample power for cutting through wood, plastic, fiberglass, and non-ferrous metals. The bare tool weighs 0.9 kilograms, ensuring reduced fatigue during extended tasks.

Safety and Operational Guidelines

Safety is critical when operating this power tool. Users must maintain a clean and well-lit work area to prevent accidents. Avoid operating in explosive atmospheres where flammable liquids or dust are present. Keep children and bystanders away to avoid distractions. Electrical safety requires using unmodified plugs and matching outlets. Never expose the tool to rain or wet conditions. Personal protective equipment such as eye protection and dust masks is mandatory. Prevent unintentional starting by ensuring the switch is off before connecting to the battery pack. Remove adjusting keys before turning the tool on to avoid personal injury.

Maintenance and Care

Proper maintenance extends the lifespan of the tool. There are no user serviceable parts inside the power tool. Do not use water or chemical cleaners for cleaning. Wipe the housing clean with a dry cloth. Keep motor ventilation slots clean to prevent overheating. Occasionally sparks visible through ventilation slots are normal. Store idle tools out of reach of children. Maintain the battery separately by charging it with the specified charger only. Avoid exposing the battery to temperatures above 130 degrees Celsius or fire. Dispose of waste electrical products properly according to local recycling guidelines.

Accessories and Applications

The universal fit accessory interface accepts attachments from various brands including Bosch and Makita. High oscillation frequency is suitable for sanding, sawing, and polishing stone or metal. Low oscillation frequency works best for scraping varnishes and old paint. Always clamp the workpiece tightly before cutting to ensure precision. Heavy pressure does not increase cut rates but accelerates accessory wear. Replace accessories regularly to maintain optimum working efficiency. Invest in anti-vibration accessories if the tool is used regularly to minimize hand-arm vibration syndrome risks.

M: QW-35-FL

© Copyright 2026 Manual.ly