Manual.ly Logo

Wolf-Garten PS 20 eM Manual

0.0 · 0 Ratings

PDF manual · 271 Pages

English

M: QW-35-FL
page

/ 271

Loading...
54828dc70734cd2ff062de5d574eb6529db4 page 22
Servicing
EN
34
Servicing
WARNING!
Risk of injuries or material damage.
¾ Maintain the pole saw in good working
condition. Improper maintenance,
using non-compliant spare parts and
the removal or modication of safety
equipment can damage the device
and cause serious injury to the person
working with it. If this work cannot be
performed by the user, a specialist
dealer must be instructed to carry out the
work.
¾ Only clean or service the device if the
motor is stationary and also the cutting
tool.
¾ Before any work on the device, rst
remove the operating arm with the
permanently installed power pack.
¾ Do not clean the device with water.
¾ Repair and service work as well as the
replacement of safety elements must
be performed by a qualied expert or
workshop.
¾ Wear safety gloves before any work on
the chain.
Î Always check the chain tension before each use
and check it regularly when using the chainsaw for
long periods.
Î Regularly check the chain oil level.
Î Arrange for the chain to be sharpened regularly by
a service centre.
Î Once yearly, arrange for the tool to be inspected
and serviced by a service centre.
Cleaning
Î Clean the power tool regularly after each use (and
according to the usage conditions). If the tool is
not cleaned correctly, the outcome may by prop-
erty damage and malfunctions.
Î Switch the device o󰀨 and wait until the cutting tool
comes to a standstill before removing the oper-
ating arm.
Î After each use, clean the tool with a dry cloth or,
in the event of heavy soiling, with a brush, paying
particular attention to the ventilation slots.
Î Carefully clean the cutting chain after each use.
Î Regularly clean the oil guidance groove (chain
running groove) on the bar using a soft brush.
Î After use, spray the chain with conditioning oil to
ensure a long service life. Where possible, use an
environmentally friendly lubricant.
Transport and storage
WARNING!
Risk of injuries due to the cutting tool.
¾ Before transport or storage, switch o󰀨
the device and wait until the cutting tool
comes to a standstill.
¾ Remove the operating arm before
transporting or storing the device.
¾ Always t the protective cover before
transport and storage.
Transport
Î Secure the device su󰀩ciently to prevent its unin-
tentional slipping if you are transporting it on or in
a vehicle.
Storage
Î Perform cleaning and servicing work before
storage.
Î Store the tool in a dry location out of the reach of
children.
Î When storing, ensure that no chain lubricating oil
can run out.
Î Place the tool in an as horizontal as possible posi-
tion with the oil tank closure facing upwards.
Î If storing for longer periods (4 weeks or more), re-
move the chain lubricating oil, to prevent gumming
up of the lube oil pump.
Î Store the operating arm and pole saw separately.
Î Store the operating arm in a cool and dry loca-
tion. Recommended storage temperature ap-
prox. 0 - 23°C
Î Keep the device and especially its plastic com-
ponents away from brake uids, petrol, mineral
oil containing products, penetrating oils etc. They
contain chemical substances that can damage,
attack or destroy the plastic components of the
device.
Î Fertilizers and other garden chemicals contain
substances that may have a highly corrosive e󰀨ect
on the metal parts of the tool. Therefore do not
store your tool near to these substances.

Chat with your Wolf-Garten PS 20 eM manual using AI

Get instant AI answers from your Wolf-Garten PS 20 eM manual

Ask anything about the Wolf-Garten PS 20 eM. Answers come from this manual, with the pages they are based on.

PS 20 eM Maintenance Schedule

Remind me when maintenance is due
Yearly
Annual inspection and servicing

Arrange for the tool to be inspected and serviced by a qualified specialist workshop at least once a year.

Show in the manual (page 34)
Before each use
Check chain tension and lubrication

Verify saw chain tension is correct and the lubrication system functions properly. Check for damage to the bar or chain.

Show in the manual (page 33)
After each use
Clean tool and ventilation slots

Switch off device, remove operating arm, and clean with a dry cloth or brush. Ensure ventilation slots are free of dirt.

Show in the manual (page 34)
After each use
Spray chain with conditioning oil

Apply care oil to the cutting chain after cleaning to prevent corrosion and ensure long service life.

Show in the manual (page 34)
Regularly
Sharpen saw chain at service center

Have the saw chain sharpened regularly by an authorized specialist workshop to maintain performance and safety.

Show in the manual (page 34)
Regularly
Check screw connections tightness

Inspect all screw and bolt joints to ensure they are firmly seated and have not come loose during operation.

Show in the manual (page 30)
Regularly
Clean oil guidance groove on bar

Use a soft brush to clean the oil guidance groove (chain running groove) on the guide bar to ensure proper lubrication flow.

Show in the manual (page 34)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend PS 20 eM?

Yes No

Frequently Asked Questions

A

No, this device is strictly designed for pruning and cutting back branches on high trees. It is not suitable for felling entire trees or cutting wood under tension.

Is this answer helpful?

A

Start the device and hold the chain about 15 cm above a surface. If lubrication is adequate, you will see a light trail of oil sprayed from the chain.

Is this answer helpful?

A

Absolutely not. Never use the pole saw while standing on a ladder or unstable platform due to the risk of losing balance and control.

Is this answer helpful?

A

You must use special biodegradable vegetable-based chain oil. Never use old motor oil as it can damage the pump and harm the environment.

Is this answer helpful?

A

No, the power pack is permanently installed in the operating arm. Only qualified service personnel can repair or replace internal components.

Is this answer helpful?

A

The 80 ml oil tank supports approximately 20 minutes of running time. Battery runtime depends on usage but generally covers significant pruning tasks.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Adjustable working angle allows access to difficult-to-reach branches
  • Cordless design offers freedom of movement without power cords
  • Insulated handles provide protection against hidden live wires
  • Biodegradable chain oil reduces environmental harm
  • Seamless integration with Wolf-Garten operating arms
VS

Disadvantages

  • Not suitable for commercial or professional tree felling
  • Requires regular maintenance of chain tension and lubrication
  • Battery is permanently installed and cannot be replaced by user
  • Cannot be used on branches thicker than the guide bar
  • Must be stored separately from the operating arm for long periods
M: QW-35-FL

Product Specification

Fits for

e-multi-star Battery Pole BS 140eM

M: QW-35-FL

Product Description

Master Your Garden with the Wolf-Garten PS 20 eM Grass Trimmer Attachment

Achieving a pristine garden often requires reaching high branches that standard tools simply cannot touch. The Wolf-Garten PS 20 eM Grass Trimmer Attachment is designed to solve this problem efficiently. This versatile pole saw attachment transforms your existing Wolf-Garten system into a powerful tool for pruning and trimming tall trees. It allows homeowners to maintain their gardens safely without the need for ladders or risky climbing.

The device features a robust cutting mechanism capable of handling branches up to the diameter of its guide bar. Its ergonomic design includes an adjustable working angle, providing five different positions to reach awkward spots easily. The unit connects seamlessly to the compatible operating arm, which houses a permanently installed rechargeable battery. This cordless freedom ensures you can work anywhere in your yard without being tethered to a power outlet.

Safety is paramount when using any cutting tool. The PS 20 eM comes equipped with essential safety features such as a protective cover for transport and insulated handles to prevent electric shock from hidden cables. The manual emphasizes strict adherence to safety protocols, including wearing personal protective equipment like goggles, helmets, and cut-resistant gloves. Users are advised to never operate the tool while standing on a ladder or unstable surface.

Maintenance is straightforward but critical for longevity. Regular checks of chain tension and lubrication are required to ensure smooth operation. The oil tank holds approximately 80 ml, sufficient for about twenty minutes of continuous running time. Biodegradable vegetable-based oils are recommended to minimize environmental impact. Always clean the ventilation slots after use and store the unit in a dry place away from children.

This attachment is strictly intended for private home gardens and is not suitable for commercial use. It excels at pruning and cutting back branches on high trees but should never be used for felling entire trees or cutting materials other than wood. By following the detailed instructions provided, users can enjoy a safe and effective gardening experience.

Important Notes

  • Always remove the operating arm before performing any maintenance or assembly tasks.
  • Do not use the tool in wet or damp conditions to avoid electrical hazards.
  • Ensure the chain is sharp and correctly tensioned before every start.
M: QW-35-FL

© Copyright 2026 Manual.ly