Manual.ly Logo

Wolf-Garten PS 20 eM Manual

0.0 · 0 Ratings

PDF manual · 271 Pages

English

M: QW-35-FL
page

/ 271

Loading...
54828dc70734cd2ff062de5d574eb6529db4 page 1e
Safety information
EN
30
¾ Only use the power packs intended for this
purpose in power tools. Use of other power
packs can result in injuries and res.
¾ Regularly check all screw or bolt joints to
ensure they have not come loose.
¾ Ensure maintenance work is always
performed to schedule. This ensures that the
safety of the power tool is maintained.
¾ Switchthedeviceo󰀨andwaituntilthecutting
tool comes to a standstill before removing the
operating arm.
¾ Replace all worn or damaged information
signs on the device.
¾ Even if all safety and operating instructions
are heeded, there is always a residual risk of
injury and property damage. Always remain
aware of this.
Safety information
Intended use
This tool is intended solely
- as a pole saw for pruning or cutting back branches
on high trees.
- for use in accordance with the descriptions and
safety instructions given in this operating manual.
The pole saw is not designed for commercial
use and may only be used in home gardens and
allotments.
Any other use is classed as an unintended use.
The user is liable for any damages arising from
unintended use.
Avoid using the power tool when the ambient tem-
perature is below 10°C.
Do not use the pole saw to saw branches that are
thicker than the cross-section of the cutting bar.
Identicationplate
Position
The identication plate is located on the casing of
the tool.
Note
The label has the status of a certicate. It
must never be altered or obliterated.
Structure
O
1 Manufacturer
2 Device group
3 Model name
4 Rated voltage, type of current
5 Weight
6 Rated size of the guide bar
7 Disposal instruction
8 Year of manufacture
9 Guaranteed sound level
10 CE mark
11 Model number
12 Serial number
Operating controls
Operating controls
P
1 On/off switch on handle
2 Lock-on switch
3 Handle
4 Oil ll level indicator
5 Protective cover
6 Cutting bar
7 ECutting chain
8 Oil tank cap
9 Adjusting wheel
10 Locking screw
11 Operating arm *(with permanently installed power pack)
12 Holding area for the hand / fastening area for the optional
middle handle
*Necessary operating element (not supplied)
Start-up
Supplementary documentation
Make sure the supplied instruction
manuals of the charger and operating
arm are available. Please read and
understand them before using the
device.
Power pack charging
WARNING!
Only charge the power pack using the
charger approved by the manufacturer.
The designations of the approved chargers
are listed in the enclosed CE Declaration of
Conformity.
Attention!
The power pack is supplied partially charged.
Before using the device for the rst time, fully
charge the power pack to ensure e󰀨ective
performance.

Chat with your Wolf-Garten PS 20 eM manual using AI

Get instant AI answers from your Wolf-Garten PS 20 eM manual

Ask anything about the Wolf-Garten PS 20 eM. Answers come from this manual, with the pages they are based on.

PS 20 eM Maintenance Schedule

Remind me when maintenance is due
Yearly
Annual inspection and servicing

Arrange for the tool to be inspected and serviced by a qualified specialist workshop at least once a year.

Show in the manual (page 34)
Before each use
Check chain tension and lubrication

Verify saw chain tension is correct and the lubrication system functions properly. Check for damage to the bar or chain.

Show in the manual (page 33)
After each use
Clean tool and ventilation slots

Switch off device, remove operating arm, and clean with a dry cloth or brush. Ensure ventilation slots are free of dirt.

Show in the manual (page 34)
After each use
Spray chain with conditioning oil

Apply care oil to the cutting chain after cleaning to prevent corrosion and ensure long service life.

Show in the manual (page 34)
Regularly
Sharpen saw chain at service center

Have the saw chain sharpened regularly by an authorized specialist workshop to maintain performance and safety.

Show in the manual (page 34)
Regularly
Check screw connections tightness

Inspect all screw and bolt joints to ensure they are firmly seated and have not come loose during operation.

Show in the manual (page 30)
Regularly
Clean oil guidance groove on bar

Use a soft brush to clean the oil guidance groove (chain running groove) on the guide bar to ensure proper lubrication flow.

Show in the manual (page 34)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend PS 20 eM?

Yes No

Frequently Asked Questions

A

No, this device is strictly designed for pruning and cutting back branches on high trees. It is not suitable for felling entire trees or cutting wood under tension.

Is this answer helpful?

A

Start the device and hold the chain about 15 cm above a surface. If lubrication is adequate, you will see a light trail of oil sprayed from the chain.

Is this answer helpful?

A

Absolutely not. Never use the pole saw while standing on a ladder or unstable platform due to the risk of losing balance and control.

Is this answer helpful?

A

You must use special biodegradable vegetable-based chain oil. Never use old motor oil as it can damage the pump and harm the environment.

Is this answer helpful?

A

No, the power pack is permanently installed in the operating arm. Only qualified service personnel can repair or replace internal components.

Is this answer helpful?

A

The 80 ml oil tank supports approximately 20 minutes of running time. Battery runtime depends on usage but generally covers significant pruning tasks.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Adjustable working angle allows access to difficult-to-reach branches
  • Cordless design offers freedom of movement without power cords
  • Insulated handles provide protection against hidden live wires
  • Biodegradable chain oil reduces environmental harm
  • Seamless integration with Wolf-Garten operating arms
VS

Disadvantages

  • Not suitable for commercial or professional tree felling
  • Requires regular maintenance of chain tension and lubrication
  • Battery is permanently installed and cannot be replaced by user
  • Cannot be used on branches thicker than the guide bar
  • Must be stored separately from the operating arm for long periods
M: QW-35-FL

Product Specification

Fits for

e-multi-star Battery Pole BS 140eM

M: QW-35-FL

Product Description

Master Your Garden with the Wolf-Garten PS 20 eM Grass Trimmer Attachment

Achieving a pristine garden often requires reaching high branches that standard tools simply cannot touch. The Wolf-Garten PS 20 eM Grass Trimmer Attachment is designed to solve this problem efficiently. This versatile pole saw attachment transforms your existing Wolf-Garten system into a powerful tool for pruning and trimming tall trees. It allows homeowners to maintain their gardens safely without the need for ladders or risky climbing.

The device features a robust cutting mechanism capable of handling branches up to the diameter of its guide bar. Its ergonomic design includes an adjustable working angle, providing five different positions to reach awkward spots easily. The unit connects seamlessly to the compatible operating arm, which houses a permanently installed rechargeable battery. This cordless freedom ensures you can work anywhere in your yard without being tethered to a power outlet.

Safety is paramount when using any cutting tool. The PS 20 eM comes equipped with essential safety features such as a protective cover for transport and insulated handles to prevent electric shock from hidden cables. The manual emphasizes strict adherence to safety protocols, including wearing personal protective equipment like goggles, helmets, and cut-resistant gloves. Users are advised to never operate the tool while standing on a ladder or unstable surface.

Maintenance is straightforward but critical for longevity. Regular checks of chain tension and lubrication are required to ensure smooth operation. The oil tank holds approximately 80 ml, sufficient for about twenty minutes of continuous running time. Biodegradable vegetable-based oils are recommended to minimize environmental impact. Always clean the ventilation slots after use and store the unit in a dry place away from children.

This attachment is strictly intended for private home gardens and is not suitable for commercial use. It excels at pruning and cutting back branches on high trees but should never be used for felling entire trees or cutting materials other than wood. By following the detailed instructions provided, users can enjoy a safe and effective gardening experience.

Important Notes

  • Always remove the operating arm before performing any maintenance or assembly tasks.
  • Do not use the tool in wet or damp conditions to avoid electrical hazards.
  • Ensure the chain is sharp and correctly tensioned before every start.
M: QW-35-FL

© Copyright 2026 Manual.ly