Manual.ly Logo

Wera Kraftform Kompakt 900 Imperial Set 1 Manual

0.0 · 0 Ratings

PDF manual · 2 Pages

English

M: qwen/qwen3.5-flash-20260224
page

/ 2

Loading...
99b06250b83f03e862e62dc7a608aaf0641e page 1
Das maximale Löse-
moment, das mit dem
Schlagschraubendreher
921 übertragen werden
kann, beträgt 25 Nm.
Beachten Sie bitte, dass
zum Lösen eingerosteter
Schrauben und Muttern
gegebenenfalls ein wesent-
lich höheres Drehmoment
benötigt wird.
El par máximo de apriete
que se puede transmitir
con el destornillador de
golpe 921 es de 25 Nm.
Por favor, tome en cuenta
que para soltar tornillos y
tuercas agarrotadas por oxi-
dación, es posible que haga
falta un par de desapriete
significativamente más alto.
Le couple de desserrage
maximal que le tournevis
à frapper 921 peut trans-
mettre est de 25 Nm.
Veuillez noter qu’un
couple bien plus élevé est
nécessaire pour desserrer
les vis et écrous rouillés, le
cas échéant.
The maximum loosening
torque that can be
transferred with the 921
impact driver is 25 Nm.
Please note that a signifi-
cantly higher torque may be
required to loosen rusted
screws and nuts.
11190761 - 00000177 - 01
Korzerter Straße 21–25
D-42349 Wuppertal
Germany
www.wera.de
www.weratools.com
www.wera-tools.co.uk
Wera Werkzeuge GmbH
Nicht hebeln. Schutzbrille und Hand-
schuhe tragen.
Don’t use as pry bar. Wear approved
safety goggles and gloves.
No utilice la her ra mienta como alzapri-
ma. Use gafas de seguridad y guantes
de protección.
Ne pas utiliser comme barre de levier.
Portez des lunettes de protection
homologuées. Mettez des gants de
protection.
Safety instructions · Instructions de
sécurité · Instrucciones de seguridad:
safety.wera.de
Gebrauchsanweisung
Schlagschrauben-
dreher 921
Instrucciones de uso
del destornillador de
golpe 921
User manual for
impact driver 921
Manuel d’utilisation
du tournevis
à frapper 921

Chat with your Wera Kraftform Kompakt 900 Imperial Set 1 manual using AI

Get instant AI answers from your Wera Kraftform Kompakt 900 Imperial Set 1 manual

Ask anything about the Wera Kraftform Kompakt 900 Imperial Set 1. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend Kraftform Kompakt 900 Imperial Set 1?

Yes No

Frequently Asked Questions

A

The maximum loosening torque that can be transferred with the 921 impact driver is 25 Nm. Please note that a significantly higher torque may be required to loosen rusted screws and nuts.

Is this answer helpful?

A

Make sure the impact wrench function is switched on. Insert the bit, position it, turn in the loosening direction and hit the impact cap with a fitters hammer up to 700 grams. Each hit moves the screw by 40 degrees.

Is this answer helpful?

A

No, you must use the 921 impact driver only with Wera impact driver bits. Make sure to use the right bit for the respective screw size to ensure proper fit and safety.

Is this answer helpful?

A

Do not use as a pry bar. Always wear approved safety goggles and gloves to protect your eyes and hands during operation.

Is this answer helpful?

A

When the impact wrench function is deactivated, a spanner size 13 can be attached to the hexagonal bolster for greater power transmission.

Is this answer helpful?

A

No, position the tool straight without exerting any force. The 921 impact driver must be held perpendicular to the screw head. Do not twist the impact driver when using it.

Is this answer helpful?

A

Full safety instructions and user manuals can be found at safety.wera.de. Please follow all guidelines for safe operation.

Is this answer helpful?

M: qwen/qwen3.5-flash-20260224

Advantages and Disadvantages

Advantages

  • Maximum torque of 25 Nm allows for efficient loosening of tight fasteners with impact force.
  • Safety features include specific warnings against use as a pry bar to prevent injury.
  • Versatility allows spanner usage on hexagonal bolster when impact function is deactivated.
  • Each hammer strike rotates the screw by approximately 40 degrees for rapid progress.
  • Requires protective gear and proper bits to ensure optimal performance and safety.
VS

Disadvantages

  • Limited to 25 Nm torque which may be insufficient for heavily rusted or seized nuts.
  • Requires a specific hammer up to 700 grams which adds to the tool setup time.
  • Must use specific Wera impact bits to ensure safe and effective torque transmission.
  • Tool requires perpendicular positioning to avoid damage or inefficient force application.
  • Impact function must be manually switched on via the lock symbol for operation.
M: qwen/qwen3.5-flash-20260224

Product Specification

Drive Size

1/4" (0.25") Hex (Bits)

Drive Types

Slotted, Phillips (PH), Torx, Hex Socket, Square Socket

Handle

6.44" Multi-component Grip

Blade Length

2.76"

Bit Sizes

0.03"/0.04"/0.05" PH1/PH2/PH3 T15/T20/T25/T30/T40 1/8"/5/32"/3/16"/1/4"

Features

Striking Cap Imperial Hex Blade Interchangeable Blade

Package Contents

Bag 19-piece accessory set Screwdriver with Bit Holder

M: qwen/qwen3.5-flash-20260224

Product Description

Wera 921 Impact Driver Analysis

The Wera 921 Impact Driver is a robust manual tool designed for demanding loosening tasks where torque is essential. It features a maximum torque capacity of 25 Nm. This specific limit is vital for users to know before application. While 25 Nm is useful for many standard fasteners, it is not meant for heavy industrial abuse without caution. When dealing with rusted screws and nuts, you may encounter significantly higher resistance. The tool cannot overcome severe seizing without significant effort beyond its rated capacity. This information is critical for preventing damage to the fastener or the tool during difficult removal processes.

To operate the unit effectively, strict adherence to safety protocols is required. Users must wear approved safety goggles and protective gloves at all times. Never use the tool as a pry bar, as this can cause damage to the mechanism and injury. The impact function must be active, indicated by an open lock symbol. Insert the correct bit into the driver and engage the screw profile. Turn the driver in the loosening direction. Hit the impact cap with a fitters hammer up to 700 grams. Each strike rotates the screw approximately 40 degrees. This mechanism aids in breaking loose tight fixtures efficiently and saves significant time compared to manual turning.

For situations requiring higher power without impact, the function can be deactivated. A standard spanner, size 13, attaches to the hexagonal bolster. This allows for manual leverage on stubborn fasteners. However, the tool must always be held perpendicular to the screw head. Tilted usage reduces effectiveness and risks damage to the bit or the fastener groove. Accuracy is key to preventing stripping or tool failure. Only Wera recommended bits should be used to ensure proper fit and torque transmission. Using incorrect bits can lead to slipping and potential harm to the user.

Conclusion

This manual tool simplifies difficult fastener removal when impact force is applied correctly. It balances strength with safety features to ensure user protection during operation. Always check the torque limit before use to maintain tool integrity. Avoid rusted joints if possible or expect the need for higher force and patience. Follow the manufacturer instructions found online for full details regarding maintenance. Proper maintenance ensures longevity and safe operation for all users working with mechanical components in various industrial settings.

M: qwen/qwen3.5-flash-20260224

© Copyright 2026 Manual.ly