Voltcraft VC-22 Manual
PDF manual · 80 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Voltcraft VC-22 manual using AI
Get instant AI answers from your Voltcraft VC-22 manual
Ask anything about the Voltcraft VC-22. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend VC-22?
Yes NoFrequently Asked Questions
The VC22 measures AC and DC voltage up to 600 V, resistance up to 20 MOhm, continuity, and temperature with the included K-type probe. It also provides non-contact AC voltage detection.
Is this answer helpful?
Yes. It is rated for CAT III measurements up to 600 V against earth potential. CAT III protective caps must be fitted to the probe tips during CAT III measurements.
Is this answer helpful?
Yes. Auto-range is active across its measurement functions, allowing the meter to select an appropriate range automatically.
Is this answer helpful?
The meter gives a continuous audible signal when it detects approximately less than 30 ohms. Higher readings do not trigger the continuity tone.
Is this answer helpful?
Using the supplied K-type sensor, the VC22 measures from -40 to +300 degrees C, equivalent to -40 to +572 degrees F.
Is this answer helpful?
No. The NCV feature is intended only as a supporting check for nearby AC voltage. Before working on a cable, verify the absence of voltage with a proper direct contact measurement.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Measures AC and DC voltage up to 600 V, resistance up to 20 MOhm, continuity, temperature, and non-contact AC voltage.
- Automatic range selection and a 4,000-count display simplify everyday measurements.
- Includes CAT III protective test leads, two AAA batteries, and a K-type temperature probe.
- HOLD function, battery-status LED, and automatic power-off support convenient field use.
Disadvantages
- Not rated for CAT IV measurements or use in damp and hazardous environments.
- Non-contact voltage detection is only an aid and must not replace direct voltage verification.
- No current measurement function is listed among the available measurement modes.
- Temperature accuracy is limited at lower temperatures, with a stated tolerance of plus or minus 4 degrees C.
Product Specification
Measurement range
max. 600 V, max. 20 Mohm
Package contents
Test leads, battery, temperature probe
Product Description
Voltcraft VC22 ISO-calibrated Digital Multimeter - Read, Download & Print Free
The Voltcraft VC22 Digital Multimeter is a compact, practical measuring tool for electrical troubleshooting, maintenance, DIY projects, and everyday workshop tasks. Designed for users who need clear readings and essential measurement functions, it combines a 4,000-count LCD display with automatic range selection to make routine checks more straightforward. Its rotary selector keeps operation familiar and direct, while the SELECT button switches between related functions such as AC and DC voltage, resistance and continuity, or Celsius and Fahrenheit temperature readings.
Essential Measurement Functions
The VC22 measures DC and AC voltage up to 600 V and resistance up to 20 MOhm. It also includes an audible continuity test, helping users identify connected conductors, cables, switches, and circuit paths quickly. Continuity is indicated by a continuous tone below approximately 30 ohms, providing a convenient confirmation without requiring constant attention to the display.
A supplied K-type temperature probe expands the meter beyond electrical tests. It supports temperature measurement from -40 to +300 degrees C, or up to 572 degrees F, which can be useful for checking heating components, ventilation systems, appliances, and other temperature-sensitive equipment. The meter also offers non-contact AC voltage detection for locating possible live AC conductors from close range. This NCV feature is intended as an initial aid and should be followed by a direct contact measurement before work begins.
Built for Practical Handling
The automatic range function selects a suitable measuring range automatically, reducing setup time and helping avoid incorrect range selection. A HOLD button freezes the active value on screen, which is useful when the display is difficult to view during a measurement. Automatic power-off after about 15 minutes helps conserve the included AAA battery supply, while the NCV LED provides a quick battery-status indication during startup.
With dimensions of approximately 130 x 65 x 32 mm and a weight of about 121 g without batteries, the VC22 is easy to store in a tool bag or drawer. It includes safety test leads with CAT III protective caps and is rated for CAT III measurements up to 600 V when used correctly. The voltage input impedance is greater than 10 MOhm, supporting reliable voltage checks in many common electrical applications.
Safety Notes
Always inspect the meter and test leads before use, keep hands behind the probe grip guards, and disconnect probes before changing functions. Resistance and continuity tests must only be performed on de-energized and discharged circuits. Do not use the meter in wet environments, near flammable vapors, or for CAT IV applications. For CAT III work, keep the protective caps fitted to the probe tips.
Note: The VC22 is suited to hobby and professional work within its stated CAT III 600 V limits. Non-contact detection is helpful for screening but does not replace a proper voltage verification measurement.
Search for 67,706 Manuals online
Type-in Brand or Model