Manual.ly Logo

Voltcraft FM-300 Manual

0.0 · 0 Ratings

PDF manual · 32 Pages

English

M: OA-GPT-54-NAN
page

/ 32

Loading...
eb6f8ee3f5b95d576abba0053e2d3c046d8f page a
10 55
F) Einstellen der automatischen Ausschaltzeit
Drücken Sie die Tasten und gleichzeitig. Die momentane Ausschaltzeit wird
angezeigt.
Halten Sie die Taste gedrückt, während Sie gleichzeitig mit Taste die Ausschaltzeit
einstellen. Sie können durch mehrmaliges Drücken von 1-10 Minuten wählen. Die Ziffer
entspricht der Wartezeit bis zum Ausschalten in Minuten.
Das Gerät schaltet nach der eingestellten Zeit ab, wenn es nicht benutzt wird.
8. Tipps und Hinweise
Messungen im Hirnholz sind nur realistisch, wenn zu messende Holzteile frisch
abgeschnitten sind. Zur exakten Messung der Feuchte im Kern von dicken Holzteilen trennt
man am besten eine Probe auf und misst in der Mitte einer Schnittfläche.
Beachten Sie, dass bei Messungen über Jahresringe der Messwert einen Mittelwert
der Feuchte von Früh- und Spätholz darstellt. Feuchteverteilungen in Holzbereichen
verschiedener Dichte müssen lokal gemessen werden. Sie sind dementsprechend auch
nur lokal valide.
Führen Sie vor jeder Inbetriebnahme einen Kalibrierungstest durch, um Fehlmessungen
zu vermeiden.
Die Messdorne sind Verschleißteile und können ausgewechselt werden.
Seien Sie bitte vorsichtig, wenn Sie die Messdorne wieder aus dem Holz herausziehen,
damit die Messdorne nicht abbrechen. Bewegen Sie dazu das Messgerät vorsichtig in
Richtung der Holzfaser und nicht quer dazu.
Obwohl das Messgerät sehr stabil ist, sollten Sie die Elektroden nie mit Gewalt in das Holz
einschlagen. Verwenden Sie bei harten Hölzern, den Einschlagsensor (S).
9. Reinigung und Wartung
Verstauen Sie Gerät und Zubehör nach Benutzung sicher und sauber in einem geeigneten
Behältnis.
Schalten Sie das Gerät vor der Reinigung stets aus. Wischen Sie das Gerät lediglich mit einem
trockenen Antistatiktuch ab. Verwenden Sie keine Scheuermittel oder Lösungsmittel!
Die Messdornspitzen können sich bei normalem Gebrauch abnutzen. Sie sind Verschleißteile,
die sowohl am Gerät als auch der Einschlagsonde auswechselbar sind, jedoch nicht an der
Temperatursonde.
10. Entsorgung
Entsorgung von von elektrischen/elektronischen Produkten
Im Interesse unserer Umwelt und um die verwendeten Rohstoffe möglichst
vollständig zu recyclen, ist der Verbraucher aufgefordert, gebrauchte und defekte
Geräte zu den öffentlichen Sammelstellen für Elektroschrott zu bringen.
Das Zeichen der durchgestrichenen Mülltonne bedeutet, dass dieses Produkt an
einer Sammelstelle für Elektronikschrott abgegeben werden muss, um es durch
Recycling einer bestmöglichen Rohstoffwiederverwertung zuzuführen.
1.
2.
3.
•
•
•
•
•
•
•
•
•
8. Tips en hints
Metingen in kopshout zijn alleen realistisch , als te meten stukken hout nieuw afgesneden
zijn. Om de vochtigheid exact te meten in de kern van dikke stukken hout haalt men er het
beste een stuk om te proberen af en meet men in het midden van een kapsnede.
Let op , dat bij metingen via jaarringen de meetwaarde een gemiddelde waarde van de
vochtigheid van voorjaarshout- en herfsthout weergeeft. Vochtverdelingen in houtgebieden
van verschillende dichtheid moeten plaatselijk gemeten worden. Ze zijn dienovereenkomstig
ook slechts plaatselijk geldig.
Doe voor elke inbedrijfstelling een calibreringstest om foutieve metingen te voorkomen..
De meetstiften zijn aan slijtage onderhevig en kunnen worden vervangen.
Opdat de meetstiften niet afbreken en daardoor de levensduur van het meetapparaat
verkort wordt..
Wees alstublieft voorzichtig als u de meetstift weer uit het hout trekt!.
Beweeg daarom het meetapparaat voorzichtig in de richting van de houtnerven en niet
dwars erop.
Hoewel het meetapparaat zeer stabiel is moet u de elektroden nooit met geweld in het hout
slaan..
9. Reiniging en onderhoud
Berg het apparaat en accessoires na gebruik veilig en schoon op in een geschikte doos.
Schakel het apparaat voor het schoonmaken altijd uit. Veeg het apparaat uitsluitend met
een droge, antistatische doek af. Gebruik geen schuurmiddel of oplosmiddel!
De meetstiftpunten kunnen bij normal gebruik afslijten. Het zijn aan slijtage onderhevige delen
bij het apparaat en vochtigheidssonde vervangbaar, echter niet bij de temperatuursonde.
10. Verwijdering
Verwijder gebruikte elektrische en elektronische apparatuur
In het belang van het behoud, de bescherming en de verbetering van de kwaliteit van
het milieu, de bescherming van de gezondheid van de mens en een behoedzaam
en rationeel gebruik van natuurlijke hulpbronnen dient de gebruiker een niet te
repareren of afgedankt product in te leveren bij de desbetreffende inzamelpunten
overeenkomstig de wettelijke voorschriften.
Het symbool met de doorgekruiste afvalbak geeft aan dat dit product gescheiden
van het gewone huishoudelijke afval moet worden ingeleverd.
•
•
•
•
•
•
•
•
•
•
•

Chat with your Voltcraft FM-300 manual using AI

Get instant AI answers from your Voltcraft FM-300 manual

Ask anything about the Voltcraft FM-300. Answers come from this manual, with the pages they are based on.

FM-300 Maintenance Schedule

After each use
Store device and accessories safely

Store the device and accessories in a secure and clean container after use.

Show in the manual (page 10)
Before cleaning
Turn off the device

Always switch the device off before cleaning it.

Show in the manual (page 10)
As needed
Clean the device

Wipe the device only with a dry anti-static cloth. Do not use abrasive cleaners or solvents.

Show in the manual (page 10)
When worn
Replace plug gauge tips

The plug gauge tips are wear parts and can be replaced on the device and moisture probe when they become worn down.

Show in the manual (page 10)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend FM-300?

Yes No

Frequently Asked Questions

A

It measures the moisture content of wood and wood-based materials. The device is designed for quick spot checks during storage, preparation, and woodworking tasks.

Is this answer helpful?

A

Yes. The FM-300 includes temperature measurement and can use a separate probe for automatic temperature compensation, which helps improve moisture-reading accuracy.

Is this answer helpful?

A

Wood species have different electrical properties, so the meter uses calibration scales to match the material. Choosing the correct scale helps produce more reliable readings.

Is this answer helpful?

A

Yes. The meter can be used on hardwood, and the separate moisture probe is especially useful when the wood is dense or difficult to test with the standard pins.

Is this answer helpful?

A

The protective cap includes calibration contacts. When the pins touch the correct contacts, the meter should show the expected test values within the specified range.

Is this answer helpful?

A

Turn it off before cleaning, wipe it with a dry anti-static cloth, and avoid water, solvents, or abrasive cleaners. Store it with the protective cap in place.

Is this answer helpful?

A

It runs on two AAA batteries. The device also has a battery status indicator and an automatic switch-off feature to help conserve power.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Large display and simple controls make readings fast and easy to understand.
  • Automatic temperature compensation helps improve measurement consistency.
  • Multiple wood calibration scales support different timber species.
  • Replaceable probe tips and auto shut-off add practical long-term value.
VS

Disadvantages

  • Pin-based measurement can leave small marks on finished wood surfaces.
  • Very wet wood can only be measured approximately above fiber saturation.
  • Accuracy depends on choosing the correct wood species scale.
  • Hard woods may require the separate probe for easier testing.
M: OA-GPT-54-NAN

Product Specification

Measuring units

°F, % vol

Measuring range

-31 to +176°F, 6-99% vol

Display

yes

Power supply

Battery operated (2x AAA battery)

Dimensions

1.93x7.09x1.26in (WxHxD)

Weight

0.30lb

Package contents

Temperature sensor, penetration sensor, 10x replacement tips

M: OA-GPT-54-NAN

Product Description

Voltcraft FM-300 Wood Moisture Meter

The Voltcraft FM-300 Wood Moisture Meter is a compact, practical tool for anyone who needs to check moisture levels in timber with confidence. Built around a resistance-based measuring principle, it gives quick readings that help users judge whether wood is ready for processing, storage, finishing, or installation. For workshops, construction tasks, furniture work, and firewood preparation, it offers a simple way to monitor material condition without guesswork.

One of the most useful parts of the device is its flexible calibration system. Different wood species behave differently, and the FM-300 accounts for that by offering multiple scales for various timber types. That makes the meter more than a basic moisture checker; it becomes a more tailored tool for real-world use. It also includes a temperature probe and automatic temperature compensation, which is important because wood temperature can affect the reading and change the result by a noticeable margin.

The design is straightforward and workshop-friendly. A large LC display makes the result easy to read, while the pin-style measurement method allows direct contact with the surface or deeper testing with the included accessory probe. The protective cap even doubles as a calibration test point, so users can confirm the meter is behaving correctly before relying on it for important decisions. This thoughtful detail adds trust and convenience.

The Voltcraft FM-300 Wood Moisture Meter Manual highlights careful use, regular calibration checks, and proper handling of the measurement tips. That matches the meter’s purpose: reliable spot checks rather than rough, careless use. The tips are replaceable, the unit runs on AAA batteries, and the auto shut-off function helps extend battery life. In daily use, those small details make the tool feel polished and efficient.

For blog readers looking for a dependable moisture meter, the FM-300 stands out as a balanced choice. It combines clear measurements, species-based calibration, temperature support, and a compact format that is easy to keep in a toolbox or workshop drawer. If moisture control matters to your project, this device brings practical insight in a simple, no-nonsense package.

Notes

  • Best used for spot checks and material evaluation.
  • Select the correct wood scale for better accuracy.
  • Temperature can influence readings, so compensation matters.
  • Replace worn probe tips when needed for consistent results.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly