Manual.ly Logo

Voltcraft ET-200 Manual

5.0 · 1 Ratings

PDF manual · 130 Pages

English

M: qwen/qwen3.5-flash-20260224
page

/ 130

Loading...
67ab282b7ba01bfe65bc06ffcef3f9fb2d96 page 28
39
5. SAFETY INSTRUCTIONS
The warranty will be void in the event of damage caused by non-compliance
with these safety instructions. We do not assume any liability for any result-
ing damage!
We do not assume any liability for material and personal damage caused by
improper use or non-compliance with the safety instructions! In such cases,
the warranty will be null and void.
Dear customer,
these safety instructions are not only to protect the product but also for your own
safety and that of other people. Therefore, please read this chapter very carefully
before using the product for the rst time!
a) General
• This device left the factory in perfect condition in terms of safety engineering. We
kindly request the user to observe the safety instructions and warnings contained
in the enclosed operating instructions so this condition is maintained and to
ensure safe operation.
• For safety and licensing (CE) reasons, unauthorised conversion and/or modica-
tions of the product are not permitted.
• Meters and their accessories are not toys and should be kept out of the reach of
children.
• The product is suitable for use only in a dry environment. No part of the product
should become damp or wet; never handle it if your hands are wet! There is a risk
of a life-threatening electric shock!
• Please make sure that your hands, your shoes, your clothing, the oor, switches
and switching components are dry.
• Never use the product immediately after it has been taken from a cold room to
a warm one. The condensation that forms can ruin the product under certain
circumstances. Leave the product switched off and wait until it has reached room
temperature, before using it.
• The device may not be used in explosion-prone areas (Ex).

Chat with your Voltcraft ET-200 manual using AI

Get instant AI answers from your Voltcraft ET-200 manual

Ask anything about the Voltcraft ET-200. Answers come from this manual, with the pages they are based on.

ET-200 Maintenance Schedule

Remind me when maintenance is due
Yearly
Calibrate the device

Have the device calibrated once a year to ensure measurement accuracy over a long period.

Show in the manual (page 57)
Before each use
Inspect meter and leads for damage

Check the instrument and measuring leads for damage before every measurement. Do not use if insulation is torn or missing.

Show in the manual (page 40)
After each use
Replace dust protection caps

Always replace the dust protection caps on connection plugs after each measurement to avoid soiling of the contacts.

Show in the manual (page 40)
As needed
Clean the device and cables

Use a clean, slightly damp, fuzz-free, antistatic cloth. Do not use aggressive chemicals or sharp tools. Let dry completely.

Show in the manual (page 58)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend ET-200?

Yes No
0
User Pic

Jan Schmidt

7 months ago

Can I rely on this device for daily iso-tests, or is it meant for occasional maintenance checks?

0
User Pic

Manual.ly

7 months ago

User reviews suggest this device is best suited for occasional iso-tests rather than daily intensive use. While the price and performance are great, frequent users should consider their specific needs to ensure long-term reliability.

M: qwen/qwen3.5-flash-20260224
M: qwen/qwen3.5-flash-20260224

Frequently Asked Questions

A

The device measures direct and alternating voltage up to a maximum of 600 volts against ground potential. This capability supports various testing scenarios within standard low-voltage installations safely. Ensure the correct measurement range is selected before connecting leads to prevent accidental damage.

Is this answer helpful?

A

No, operation with rechargeable batteries is not permitted according to the specifications. You must use six standard alkaline batteries of type AA or LR6. Using other types may affect performance or safety ratings significantly.

Is this answer helpful?

A

It can measure insulation resistances up to 20 gigaohms effectively. This is achieved using an adjustable auxiliary voltage ranging from 50 to 1000 volts DC. Always ensure the circuit is de-energized before attempting any insulation testing procedures.

Is this answer helpful?

A

The internal memory cells allow storage of up to ninety-nine measured values. This feature enables technicians to save important readings for later review and comparison. You can recall these stored values directly from the display interface easily.

Is this answer helpful?

A

Yes, the low-ohm resistance measurement range is protected with a 500 mA fuse. This protects the meter from external voltages during specific types of resistance testing. If measurements fail, check the fuse condition before attempting repairs.

Is this answer helpful?

A

The meter is rated for measurement category IV up to 600 volts against earth potential. This rating indicates it is suitable for use at the source of the low-voltage installation and outdoors. Adhere strictly to category limits to maintain safety standards.

Is this answer helpful?

A

Press the COMP or ZERO button for approximately three seconds with leads shorted. This action sets the lead resistance to zero in the display for accurate low-ohm readings. This compensates for the inherent resistance of the cables used during testing.

Is this answer helpful?

M: qwen/qwen3.5-flash-20260224

Advantages and Disadvantages

Advantages

  • Measurable auxiliary voltage from 50V to 1000V in adjustable steps for precise testing.
  • Supports CAT IV 600V measurement category for safe operation at service entrance level.
  • Includes internal memory allowing storage of up to ninety-nine measurement values.
  • True RMS function provides accurate AC voltage readings regardless of waveform shape.
  • Battery powered design eliminates dependency on external power sources for field work.
VS

Disadvantages

  • Requires six separate AA batteries which can be a recurring maintenance and cost factor.
  • Does not support rechargeable battery operation despite modern alternatives being available.
  • Fuse protection is only included in the low-ohm resistance range not voltage inputs.
  • Complex functions like PI and DAR calculations may be advanced for casual hobbyists.
  • Maximum voltage limit is 600 volts which is insufficient for higher industrial grids.
M: qwen/qwen3.5-flash-20260224

Product Description

Discover Precision with the Voltcraft ET-200 Insulation Tester

When selecting professional testing equipment, electricians and technicians need absolute reliability. The Voltcraft ET-200 Insulation Tester stands out as a robust solution designed for demanding environments. This device allows users to measure critical electrical parameters safely and accurately using advanced electronics. With a maximum voltage rating of 600 volts against ground potential, it handles tasks ranging from household wiring to significant industrial installations. The instrument supports measurement category IV, ensuring safety at the source of low-voltage installations and outdoors.

Versatile Measurement Capabilities

Functionality is at the core of this tool designed for comprehensive diagnostics. It measures direct and alternating voltage up to 600 volts effectively. Users can also evaluate insulation resistance up to 20 gigaohms using an adjustable auxiliary voltage source. This range starts at 50 volts and goes up to 1000 volts DC with 10 percent increments. Low-ohm resistance measurements are also possible, covering values from 0.01 ohms to 20 kiloohms efficiently. The True RMS technology ensures accurate AC voltage readings even with complex non-sinusoidal waves in the circuit.

Safety and Design Standards

Safety protocols are strictly integrated into the physical design. Warning lights alert users immediately when auxiliary voltage is active on the cables. Measurement leads feature wear indicators that reveal insulation damage to the second color layer easily. The device protects its low-ohm range with an integrated fuse against external voltage spikes. Operating guidelines guide the user through safe battery replacement and startup procedures. Proper handling ensures the warranty remains valid over the long term of usage.

Operational Efficiency and Power

Powering the unit requires six regular alkaline batteries for consistent performance. This setup provides approximately 800 insulation measurements before a change is needed for optimal voltage. The display shows measured values clearly with a high resolution of 6000 counts. Internal memory can store up to ninety-nine values for later detailed review and analysis. Advanced functions include the polarization index and dielectric absorption rate calculations for insulation quality analysis.

For detailed setup information, consult the Voltcraft ET-200 Insulation Tester Manual. It provides necessary steps for connecting leads and selecting the correct ranges safely. Following these guidelines ensures optimal performance and personal safety during critical operation. Whether for hobbyists or professionals, this multimeter delivers value through its balance of features and price point. Always ensure the device is turned off when not in active use to preserve battery life completely. The automatic switch-off feature adds significant convenience for busy workdays.

Maintenance Tips for Longevity

Regular cleaning with a slightly damp cloth keeps the device functional for years. Avoid aggressive chemicals that damage the casing or display screen. Store the unit in its protective carry bag when traveling to job sites. Keep batteries charged and remove them if not used for extended periods to prevent leakage. This care extends the lifespan of your investment effectively and safely.

M: qwen/qwen3.5-flash-20260224

© Copyright 2026 Manual.ly