Manual.ly Logo

Vitavia Dione Manual

0.0 · 0 Ratings

PDF manual · 36 Pages

English

M: QW-35-FL
page

/ 36

Loading...
5a3900c2926c411b7c3f7aa390e6c676e1f0 page 5
5006.01.2007
5L and 5R. DOORS
Attention: Do not stand the assembled
doors on the door gliders (1014) to avoid
damaging them.
Push the door gliders (1014) onto both ends of
door bar (1360) (5.1).
Assemble the doors as shown in diagram 5.
Bolt door bar (1362) to upper bar (1359) (5.3)
and slide door seals (5021) into door bars
(5058) (5.5). Slide bolts (1500) into the bottom
of the bolt channel holding brush seals (5021)
and x it in place using nut (1515) (5.6). Cut
the door seals (5021) to length. Please ensure
that for the inside side bar the part (5099) is
used on the left in (5L) and (5098) on the right
in (5R).
Connect door rollers (1015) to the door bar
(1362) using bolt (1304), washer (1009) and
nut (1007) (5.4).
Connect bolt (2001) at the join between both
(5045) as shown (5R).
Loosen the door supports (2043).
Now slide the door rollers into the door runner
bar (5045) (5.7). Please ensure that the door
gliders are also running on the bottom track
(5.8).
Adjust the doors so that they move freely.
6. ROOF VENTS
Connect the side bars (1065) and the top bar
(1064) depending on the glass thickness.
Up to 4 mm, see (6.1). For 4 mm and over,
see (6.2).
Place the bolts to connect the bottom bar
(1066) in the prepared holes, and then slide
the glass into the tracks in side bars (1065)
(6.3).
Now connect bottom bar (1066), and ensure
that the window is totally square before tighte-
ning all bolts.
Position the window in the ridge bar from one
end (6.4) and (6.5) and slide it to the required
position (6.6).
Connect the window sill (1063) with the extra
bolts in the roof bars (6.7).
Bolt the window opener (1067) to the bottom
bar (1066) using screws (1006) (6.8).
Place the plastic cap (1019) over the end of
the window opener (6.6) and connect both
window xers (2016) onto the window sill
(1063) using screws (1006) (6.8).
7A. and 7B. GLAZING – CLEAR GLASS
Please note the already mentioned safety
precautions and the glazing method pro-
vided, “A” or “B”.
Press the glazing seals (1020) onto the alu-
minium proles (7.2) and cut to length.
On the roof, begin by positioning the glass at
the eave. Fix the PC (Polycarbonate) glass
(5020) to the roof bars using retaining clips
(1011) and bend it over the curved section
continuing to x with (1011) (7.1).
The following pane should be placed over the
pane directly under it and held in place with
the glass retaining clips (1012) between the
panes (7.3).
On the sides please begin from the bottom.
When glazing the front or back, t part (5012)
as shown on pane 7 or 10 and bend it up to x
upper panes 5 or 11 (7.4).
It is possible to replace a lower side pane
(for 7A pane 1, for 7B change one pane 10
with pane 13) with a louver window. The louver
is not included.
FINISHING
If desired, it is possible to seal the greenhouse
at the edges using neutral silicone. Silicone is
not in cluded.
Place the warning label inside the house.
A full range of accessories is available to help
you make the most of this product. Please
contact your local stockist for details.
SAFETY NOTICE
In the event of high winds, close all doors and
vents.
In the event of heavy snowfall, clear the roof
of the building or take suitable measures to
support the roof. Heat the building in winter.
COMMENTS
For the complete protection of your new
greenhouse, we advise you to include it in
your house insurance. Please take note of
possible building rules relating to the position-
ing of greenhouses.
Please stick the greenhouse model label pro-
vided onto the door bar (1362) after success-
fully assembling this product. This information
is important in the event that replacement
parts are later required.
Please keep these Assembly Instructions in
a safe place, for future reference!
Our policy is one of continuous improvement
and we reserve the right to change the speci-
cations without prior notice.

Chat with your Vitavia Dione manual using AI

Get instant AI answers from your Vitavia Dione manual

Ask anything about the Vitavia Dione. Answers come from this manual, with the pages they are based on.

Dione Maintenance Schedule

Occasionally
Wash the greenhouse with gentle detergent

Thoroughly wash the greenhouse occasionally using a gentle detergent that does not react aggressively with aluminium or glass fixing clips.

Regularly
Clean door tracks to prevent debris build-up

Ensure that the upper and lower door tracks are cleaned regularly to avoid a build-up of debris which can hinder operation.

Seasonally
Clear snow from roof during heavy snowfall

In the event of heavy snowfall, clear the roof of the building or take suitable measures to support the roof to prevent damage.

M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend Dione?

Yes No

Frequently Asked Questions

A

Two people are recommended for safe and efficient assembly according to the manufacturer instructions. Working alone can lead to difficulties aligning the heavy profiles correctly without assistance from another person ensuring the structure is stable.

Is this answer helpful?

A

You will need screwdrivers including crosshead PH2, a 10 mm socket spanner, knife, measuring stick, spirit level and accu-drill with adjustable torque. Having these ready speeds up the building process significantly for the user.

Is this answer helpful?

A

You must clear the roof regularly during heavy snowfall to prevent structural damage. Taking suitable measures to support the roof is necessary to avoid collapse under extreme weather conditions occurring in winter climates.

Is this answer helpful?

A

No a zinc coated steel base is sold separately as an accessory. You can also build your own stone or concrete foundation ensuring it is square and level below the frost level for stability.

Is this answer helpful?

A

Protective glasses gloves shoes and headgear are required due to sharp edges on aluminium profiles and glass. Broken glass is a hazard so always clear up immediately and dispose of with care to prevent injury.

Is this answer helpful?

A

Upper and lower door tracks should be cleaned regularly to avoid a build-up of debris. Using a gentle detergent occasionally on the frame helps maintain the aluminium condition without aggressive chemical reactions damaging the finish.

Is this answer helpful?

A

Please check that the detergent used does not react aggressively with aluminium or the glass fixing clips. Avoid harsh chemicals that might degrade the materials over time affecting the lifespan of the structure significantly.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Sturdy aluminium frame resists corrosion and provides long term durability
  • Comprehensive multilingual assembly instructions included for easier understanding
  • Adjustable roof vents regulate internal temperature effectively for plants
  • Sliding double doors allow easy access for gardening tools and carts
  • Available in multiple sizes to suit various garden spaces and needs
VS

Disadvantages

  • Assembly requires at least two people for safety and efficiency
  • Anchoring to ground is mandatory for stability against wind
  • Glazing handles sharp edges requiring protective gear during install
  • Window seals may require additional purchase later for full weatherproofing
  • Torque settings must be precise to avoid damage to aluminium frames
M: QW-35-FL

Product Specification

Frame

Aluminum

Door

Double Sliding Door

Package Contents

Steel Foundation

M: QW-35-FL

Product Description

Discover the Perfect Garden Companion

If you are looking for a reliable structure for your garden the Vitavia Dione Greenhouse offers an excellent solution for plant enthusiasts. This comprehensive manual guides you through the assembly process to ensure your greenhouse stands strong against the elements. Designed with durability in mind the frame utilizes high quality aluminium profiles that resist corrosion while maintaining a sleek appearance in your outdoor space. It is built to accommodate various growing needs whether you intend to start seeds or overwinter tender plants.

Assembly Made Easy for Beginners

While the instructions state that two people are strongly recommended for construction the layout simplifies what could otherwise be a complex project. You will need basic tools such as standard screwdrivers and a socket wrench to handle the bolts efficiently. It is vital to follow the torque specifications marked clearly in the documentation provided with every kit. Specifically nuts should not exceed 3Nm to prevent damage to the threads or frames. Pay close attention to the sequence provided for connecting side elements and gable ends to maintain square alignment.

Foundation and Site Selection

Choosing the right location impacts your success immensely. Aim for a sunny spot that remains sheltered from strong winds as much as possible before starting work. The base must be exactly square and level to prevent structural issues later on. A zinc coated steel base is available as an accessory for all greenhouse models to enhance stability. If constructing your own stone or concrete foundation please ensure it extends down below the frost level for protection during colder months.

Features and Functionality

Once assembled you will appreciate the practical design choices incorporated in Dione series. The inclusion of roof vents allows for passive ventilation which regulates temperature during hot summer days. For accessibility most models come equipped with sliding double doors that facilitate easy movement of carts and pots inside. Whether you choose polycarbonate panels or clear glass for glazing the structure protects your crops effectively from rain and hail. The windows can be positioned to open automatically to manage heat buildup.

Safety and Maintenance Tips

Regular maintenance ensures longevity throughout the seasons. Wash the frame occasionally using a gentle detergent that does not react aggressively with the aluminium components. Clear up any debris from the upper and lower door tracks immediately to prevent jamming mechanisms. During winter remember to clear heavy snowfall from the roof to avoid structural stress on the bars. Always anchor the greenhouse securely to the ground to withstand high winds safely. By adhering to these guidelines your greenhouse will provide years of gardening success.

Final Thoughts

Purchasing this unit comes with detailed international instructions covering multiple languages. This global approach means spare parts availability remains high for years to come. Keep your identification sticker visible inside for future reference when ordering replacements. With proper setup you enjoy a climate controlled environment for your hobby plants year round. Enjoy your time nurturing nature within this sturdy shelter designed for growth.

M: QW-35-FL

© Copyright 2026 Manual.ly