Manual.ly Logo

Vitavia Comet 2500 Manual

0.0 · 0 Ratings

PDF manual · 44 Pages

English

M: QW-35-FL
page

/ 44

Loading...
a546e0b9c6d4676d9a0e1b17268bd3e14774 page 11
17
Upozornění: V případě používání přírodních hnojiv (koňský / kravský hnůj, slepičince, apod.), umělých hnojiva, pesticidů, herbicidů a jiných chemikálií může po delší nebo i
kratší době docházet ke korozi ocelových dílů skleníku (základna, šrouby, apod.).
Péče a údržba
K čištění skleníku používejte pouze a výhradně slabý mýdlový roztok a jemný hadřík. Po umytí skleník opláchněte čistou vodou. Nepoužívejte čisticí prostředky obsahující chemická
rozpouštědla nebo prostředky na bázi lihu a alkoholu (např. Iron nebo Okenu). Pozor na poškrábání špinavým hadrem nebo špinavou houbou. Materiál skleníku nesmí přijít do kontaktu s
chemickými čistidly a rozpouštědly, s chemikáliemi typu benzin (vč. technického), aceton, toulen, chlor (např. Savo), terpentýn, ředidla na barvy (např. rada S 6xxx), apod. Při použití čistidel a
organických rozpouštědel dojde vždy ke zničení polykarbonátového skla.
POZOR – polykarbonátové desky nelze natírat žádným nátěrem nebo barvou (i když dodavatel barvy tvrdí, že jde o produkt kompatibilní s polykarbonátem). Natření desek znamená
okamžitou ztrátu záruky a jistotu brzkého poškození desek a následně celého skleníku.
• ZBAVUJTE PRAVIDELNĚ STŘECHU LISTÍ A NEČISTOT
• PRŮBĚŽNĚ KONTROLUJTE, ZDA UKOTVENÍ DO ZEMĚ PEVNĚ DRŽÍ
• POKUD METEOROLOGOVÉ OHLÁSÍ VĚTRNÉ DNY, MUSÍ BÝT U SKLENÍKU BEZPODMÍNEČNĚ PEVNĚ UZAVŘENÉ DVEŘE I VENTILAČNÍ OKNA
• POZOR PŘI HROZÍCÍM VĚTRU (NAPŘ. PŘED BOUŘKOU NEBO PODLE PŘEDPOVĚDI POČASÍ) MANUÁLNĚ IHNED UZAVŘETE I VENTILAČNÍ OKNA OPATŘENÁ
AUTOMATICKÝM OTVÍRAČEM (PŘÍPLATKOVÉ PŘÍSLUŠENSTVÍ)
• V ZIMĚ PRAVIDELNĚ ZBAVUJTE STŘECHU SKLENÍKU SNĚHU NEBO STŘEŠE DODEJTE DOSTATEČNOU PODPORU, ABY UDRŽELA VÁHU SNĚHU – ZEJMÉNA
PŘI VĚTŠÍCH PŘÍVALECH SNĚHU
• NA ZIMU ZE SKLENÍKU ODMONTUJTE AUTOMATICKÝ OTVÍRAČ OKNA (PŘÍPLATKOVÉ PŘÍSLUŠENSTVÍ) A USKLADNĚTE JEJ PŘI TEPLOTÁCH VYŠŠÍCH NEŽ
0OC (MRÁZ MŮŽE OTVÍRAČ POŠKODIT)
verze 09.08.2016
993.01.2009

Chat with your Vitavia Comet 2500 manual using AI

Get instant AI answers from your Vitavia Comet 2500 manual

Ask anything about the Vitavia Comet 2500. Answers come from this manual, with the pages they are based on.

Comet 2500 Maintenance Schedule

Occasionally
Wash the greenhouse with gentle detergent

Thoroughly wash the greenhouse occasionally with a gentle detergent. Ensure the detergent does not react aggressively with aluminium or glass fixing clips.

Regularly
Clean door tracks to remove debris

Ensure that the upper and lower door tracks are cleaned regularly to avoid a build-up of debris.

Regularly
Remove leaves and dirt from roof

Regularly remove leaves and dirt from the greenhouse roof to prevent accumulation.

Show in the manual (page 17)
Ongoing
Check ground anchoring stability

Continuously check that the anchoring into the ground is firmly holding the structure.

Show in the manual (page 17)
Seasonally (Winter)
Remove snow from roof in winter

In winter, regularly remove snow from the roof or provide sufficient support to hold the weight of heavy snowfall.

Show in the manual (page 17)
Seasonally (Winter)
Remove automatic window opener for storage

During winter, remove the automatic window opener and store it at temperatures above 0°C to prevent frost damage.

Show in the manual (page 17)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend Comet 2500?

Yes No

Frequently Asked Questions

A

You will need normal and crosshead screwdrivers, a 10 mm socket spanner or wrench, 10 mm combination spanner, a knife, measuring stick, spirit level, and an Accu-drill with adjustable torque.

Is this answer helpful?

A

It is strongly recommended that the greenhouse is assembled by two people to handle the aluminium profiles and glass safely and correctly.

Is this answer helpful?

A

If something is missing, please contact your retailer immediately. Do not proceed with assembly if components are incomplete, or the warranty may be void.

Is this answer helpful?

A

Wash thoroughly with gentle detergent occasionally. Check that the detergent does not react aggressively with aluminium or the glass fixing clips.

Is this answer helpful?

A

In the event of high wind conditions, close the door and all vents. The structure is tested up to 75 km/h but resistance drops significantly if open.

Is this answer helpful?

A

Yes, one side is UV-resistant, marked by a film and printing. This side must face outside and the film should be peeled off only after the pane is installed.

Is this answer helpful?

A

Yes, the base must be exactly square and level. A zinc-coated steel base is available as an accessory, or you can use treated wooden beams on stone/concrete.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Robust aluminium frame resists rust and corrosion effectively over time.
  • Roof vent allows critical ventilation and temperature regulation for plants.
  • 4mm polycarbonate offers better insulation than traditional glass materials.
  • Sliding door mechanism provides easy access without taking up space.
  • Comprehensive multi-language instructions available for assembly guidance.
VS

Disadvantages

  • Requires strict adherence to base leveling for proper structural fit.
  • Maximum bolt torque of 3 Nm requires careful attention to avoid stripping.
  • Protective film must be removed after installation to prevent sun damage.
  • Anchoring to the ground is mandatory for safety in high winds.
  • Drill bits not included despite needing holes for certain pane connections.
M: QW-35-FL

Product Specification

Glazing

Polycarbonate 0.16 in (Twin-wall sheets)

Frame

Aluminum

Color

green

Area

26.91 sq ft

Features

Roof window, Gutter, Lockable

Door

Sliding door

Dimensions (LxWxH)

76.77x51.57x77.56 in

Weight

50.04 lbs

M: QW-35-FL

Product Description

Welcome to Your New Growing Space

Starting a new greenhouse project is an exciting step for any gardener looking to extend their growing season. The primary resource for success with this unit is the Vitavia Comet 2500 HKP 4mm Greenhouse Emerald Manual. This comprehensive guide outlines every step required to transform a box of parts into a sturdy shelter for your plants. The frame is constructed from high-quality aluminium profiles that resist rust and corrosion over time.

Structural Integrity and Base Preparation

Before lifting a single profile, you must prepare the foundation. The text emphasizes that the base must be exactly square and level. Failure to do so can lead to alignment issues with the roof bars and door tracks later. A zinc-coated steel base is recommended for added stability, particularly if located in a very windy area. If constructing your own concrete or stone foundation, wood beams of at least 18 mm thickness should separate the metal frame from the ground to prevent moisture wicking. All foundations must extend below the frost line to remain solid throughout winter.

Assembly Process Overview

The construction begins with laying out all side elements loosely connected on the floor. The plain gable end and door gable end are assembled separately before connecting them together. Special attention is paid to the door runner bar, which determines the direction of the sliding door operation. Once the frame skeleton is bolted, position the structure on the foundation. Adjust until perfectly square before tightening all bolts securely but gently, adhering to the maximum torque of 3 Nm specified in the instructions.

Roof Vents and Glazing

Ventilation is critical for plant health. The roof vent assembly involves connecting side bars to the top bar and positioning the panel within the ridge bar. Ensure the window is square before final tightening. The glazing section uses 4mm polycarbonate panes which are cut slightly shorter to allow for thermal expansion. Remember that the UV-resistant side marked by the plastic film faces outward. Remove this film only once the pane is fixed in place to prevent degradation under direct sunlight.

Maintenance and Safety Tips

Regular cleaning with gentle detergent is sufficient; avoid aggressive solvents that react with aluminium or glazing clips. Keep upper and lower door tracks clear of debris. In high winds, always close the door and all vents to reduce strain. During heavy snowfall, clear the roof immediately or support it internally. Finally, stick the model label onto the door bar for future reference when ordering spare parts. With care, this greenhouse offers reliable protection.

Notes

Always wear protective glasses, gloves, and headgear when handling sharp edges. Do not use force if fitting is difficult; contact the retailer. The product is intended for growing plants only.

M: QW-35-FL

© Copyright 2026 Manual.ly