Victron Energy Orion-Tr Manual
PDF manual · 2 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Victron Energy Orion-Tr manual using AI
Get instant AI answers from your Victron Energy Orion-Tr manual
Ask anything about the Victron Energy Orion-Tr. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend Orion-Tr?
Yes NoFrequently Asked Questions
Orion-Tr models are available for 12 V, 24 V and 48 V input systems. The 12 V and 24 V versions include an internal non-replaceable input fuse; the 48 V version requires an external input fuse.
Is this answer helpful?
Use the onboard potentiometer to adjust output voltage. Default outputs are 12.2 V, 24.2 V or 48.2 V depending on model; the output can be varied roughly from -15% to +25%. Turn counterclockwise to decrease voltage and clockwise to increase it.
Is this answer helpful?
Yes. Converters can be paralleled because the outputs are overload and short-circuit protected. Always match and set the output voltages before connecting units in parallel or before connecting a battery to avoid imbalance.
Is this answer helpful?
Replace the wire bridge on the green connector with a switch (switched current <100 mA) or remove the bridge and connect the right-hand terminal to battery plus via a switch (for example an engine run/stop switch) to remotely control the converter.
Is this answer helpful?
Mount the converter in a cool, dry and well-ventilated area. Ensure secure power and load connections and provide appropriate fusing—especially an external fuse for 48 V models—to protect the system and meet safety requirements.
Is this answer helpful?
Yes. The Orion-Tr outputs include overload and short-circuit protection, improving safety and allowing parallel operation. Nevertheless, observe correct wiring and fusing practices to prevent damage in fault conditions.
Is this answer helpful?
12 V and 24 V models have an internal, non-replaceable input fuse. For 48 V models you must fit a suitably rated external input fuse. Always choose fuses following system voltage and current specifications and local regulations.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Isolated DC output prevents ground loops and reduces electrical interference.
- Adjustable output voltage from approximately -15% to +25% via onboard potentiometer.
- Overload and short-circuit protected outputs allow safe parallel connection.
- Optional remote on/off input with low control current (<100 mA) for flexible control.
- Compact and suitable for vehicle, marine, and mobile power applications.
Disadvantages
- 12 V and 24 V models have a non-replaceable internal input fuse limiting field serviceability.
- 48 V models require an external input fuse which must be selected and installed separately.
- Remote control wiring requires attention to polarity and proper switch rating (<100 mA).
- Output adjustment must be completed before paralleling or battery connection to avoid issues.
- Ventilation and mounting location must be chosen carefully to avoid overheating.
Product Specification
Inputs
2x Terminals
Outputs
2x Terminals
Special features
Overheat protection
Product Description
Victron Energy DC-DC Converter isolated Orion-Tr
The Victron Energy DC-DC Converter isolated Orion-Tr is a robust, compact converter designed to deliver stable, isolated DC power for vehicles, marine systems, and mobile installations. Available in 12 V, 24 V and 48 V input models, the Orion-Tr offers selectable output voltages (default 12.2 V, 24.2 V or 48.2 V) with adjustable range from approximately -15% to +25% via an onboard potentiometer. Its isolated design helps prevent ground loops and electrical interference between source and load, making it ideal for sensitive electronics and multi-battery systems.
Key features and operation
Install the Orion-Tr in a cool, dry, well-ventilated location and connect the input supply cables. Note that 12 V and 24 V input models include a non-replaceable internal input fuse; 48 V models require an external input fuse. The converter supports an optional remote on/off function by replacing a wire bridge on the green connector with a switch (switched current <100 mA) or wiring the right-hand terminal to battery plus via a switch (for example an engine run/stop switch).
The output voltage is adjustable with the potentiometer—turn counterclockwise to decrease and clockwise to increase. Outputs are protected against overloads and short circuits, enabling safe parallel connection of multiple units when output voltages are matched beforehand. After setting the desired output and wiring the load, the converter is ready for service.
Typical applications
The Orion-Tr suits DC power isolation needs in campervans, boats, work vehicles, and industrial equipment. It is especially useful where clean, isolated power is required for sensitive electronics, or where multiple battery banks and charging sources must be managed without ground-loop interference.
Safety and installation notes
Always choose appropriate fusing (external for 48 V models), secure connections, and adequate ventilation. Adjust the output voltage before paralleling units or connecting a battery. Use the remote on/off wiring options only with switches rated for the specified control current.
Notes:
- Default outputs: 12.2 V, 24.2 V, 48.2 V depending on model.
- Output adjustable ~-15% to +25% via potentiometer.
- 12 V/24 V models have internal non-replaceable input fuse; 48 V needs external fuse.
- Parallel connection permitted after voltage matching.
Search for 67,706 Manuals online
Type-in Brand or Model