Manual.ly Logo

Victron Energy MultiPlus 48/2000/25-50 Manual

0.0 · 0 Ratings

PDF manual · 26 Pages

English

M: QW-35-FL
page

/ 26

Loading...
2ea51f5a1fab9e7a25578705b3917b30a5d8 page 1
MultiPlus 2kVA 120V
rev 05 - 01/2022
ENGLISH

Chat with your Victron Energy MultiPlus 48/2000/25-50 manual using AI

Get instant AI answers from your Victron Energy MultiPlus 48/2000/25-50 manual

Ask anything about the Victron Energy MultiPlus 48/2000/25-50. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend MultiPlus 48/2000/25-50?

Yes No

Frequently Asked Questions

A

The MultiPlus switches between grid and inverter power in less than 20 milliseconds, ensuring no interruption for most electronic devices.

Is this answer helpful?

A

Yes, you can connect up to six identical MultiPlus units in parallel to increase total power output or configure them for three-phase operation.

Is this answer helpful?

A

Yes, the MultiPlus supports Li-Ion batteries including LiFePO4 types, provided they have an appropriate battery management system.

Is this answer helpful?

A

PowerAssist supplements shore or generator power by drawing from the battery during peak loads and recharging the battery when load decreases.

Is this answer helpful?

A

Yes, it is designed for marine use but must be installed in a dry, well-ventilated area away from direct battery gases to prevent corrosion.

Is this answer helpful?

A

The unit will reduce charging current or shut down to protect the battery, especially if a temperature sensor is connected.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Seamless power transition under 20 milliseconds prevents data loss in sensitive electronics
  • Adaptive four-stage charging algorithm extends battery lifespan significantly
  • PowerAssist function allows smaller generators to handle peak electrical loads effectively
  • Supports parallel and three-phase configurations for scalable high-power applications
  • Programmable relay and remote control options offer versatile system integration
VS

Disadvantages

  • Requires professional installation due to high voltage and complex wiring requirements
  • Standard factory settings may need adjustment for specific non-Victron battery types
  • Higher initial cost compared to basic inverters without integrated charging capabilities
  • Limited starter battery charge output restricted to 1 amp on certain models
  • Configuration requires specific hardware interfaces like MK3-USB for full customization
M: QW-35-FL

Product Specification

Note

Prices include 0% VAT rates for AT and DE in some cases

Type

Battery inverter, with fan

Input voltage

38-66V DC

Output power

2.68kW

Efficiency

95.0% max.

Output

Terminals

Protection class

IP22

Ambient temperature

-40F to +149F

Dimensions

9.29x19.92x5.79in (WxDxH)

Weight

34.17lbs

M: QW-35-FL

Product Description

Victron Energy MultiPlus 48/2000/25-50 120V: The Ultimate Power Solution

The Victron Energy MultiPlus 48/2000/25-50 120V stands as a pinnacle of modern energy management, combining the power of a true sine wave inverter, a sophisticated battery charger, and a high-speed AC transfer switch into a single, robust enclosure. This multifunctional device is designed for those who demand uninterrupted power, whether for marine applications, off-grid homes, or mobile setups. Its ability to switch between grid power and battery power in less than 20 milliseconds ensures that sensitive electronics like computers and medical devices never experience a disruption.

One of the standout features of this unit is its advanced adaptive charging technology. It intelligently manages the four-stage charging process - bulk, absorption, float, and storage - to maximize battery life while preventing overcharging. The inclusion of Battery Safe mode protects against excessive gassing during rapid charging, while the dedicated Storage mode minimizes corrosion when the system sits idle. For users with limited generator capacity, the PowerAssist feature acts as a booster, supplying extra current during peak loads and recharging batteries when demand drops.

Installation is straightforward for qualified professionals, with clear guidelines for connecting DC and AC cabling. The unit supports parallel operation, allowing up to six units to work together for higher power output, and even offers three-phase configuration capabilities. With programmable relays and remote control options via the VE.Bus System Configurator, the MultiPlus offers flexibility that adapts to complex energy systems. Whether you are looking for a reliable backup power source or a primary energy solution, this inverter delivers efficiency and reliability.

Key Features

  • True Sine Wave Output: Delivers clean power suitable for all electronic equipment.
  • Adaptive Charging: Automatically adjusts to battery type and condition for optimal health.
  • PowerAssist Technology: Boosts generator or shore power capacity during peaks.
  • Parallel Capability: Connect up to six units for scalable power solutions.
  • Smart Configuration: Easily managed via software tools like VE.Configure.

Important Notes

Always ensure the unit is installed in a well-ventilated area away from direct battery exposure to prevent gas corrosion. Use only VRLA or Li-Ion batteries as specified to avoid explosion risks. Regular maintenance by qualified personnel is recommended to ensure long-term performance.

M: QW-35-FL

© Copyright 2026 Manual.ly