Manual.ly Logo

Tunturi Centuri T100 Manual

0.0 · 0 Ratings

PDF manual · 106 Pages

English

M: QW-35-FL
page

/ 106

Loading...
5043c9df716d6a256c9459773355b89e8bb7 page 18
• Prevent that the solution comes between running deck and
running belt at all times.
This should be done on a regular basis to extend belt and running
deck life.
Lubrication (fig. F-6)
‼ NOTE
• The Treadmill running belt is pre lubricated before fitting on your
treadmill during the production of the unit. Therefore it is not
needed to lubricate the running belt when taken into use for the
first time.
The running belt must be checked for lubrication condition regularly.
Therefore the treadmill comes with a 300 hours reminder function.
The “TIME WINDOW” will display “OIL” and will make an acoustic
beeping sound every 10 seconds to remind you. Follow the below
checking procedure and eliminate the “OIL” message and acoustic
warning signal by pressing and hold the “STOP” button for at least 3
seconds during this warning signal.
⚠ WARNING
• Before lubrication, remove the mains plug from the wall socket.
⚠ CAUTION
• We recommend to check the running belt lubrication at least
once every month, as more factors than time can be effective to
the lubricant conditions.
• Only lubricate the running belt if necessary. If you apply too
much lubricant, the running belt will slip easily due to lack of
friction.
- Stand steadily on the running belt.
- Take hold of the front handlebar and push the running belt with
your feet so that it slides back and forth. The running belt must
move smoothly and evenly without making sound.
- If the running belt does not move smoothly and evenly or if the
running belt does not move at all, touch the underside of the
running belt with your fingertips to check the lubrication:
• If you feel lubrication or your fingertips are shiny, there is
sufficient lubrication on the running belt.
• If you do not feel lubrication or your fingertips are dusty or
rough, apply lubricant (±10 ml.) in the middle of the running
deck under the running belt and let the equipment operate at
5km/h for at least 5 minutes.
• After lubrication, do not fold the equipment before having done
a workout for 2 minutes with a speed of at least 5 km/h.
This will cause the lubricant being fully absorbed by the running
belt and being spread evenly.
‼ NOTE
• When 5 km/h is too fast for you, do walk at your desired speed,
but extend the duration to at least 5 minutes.
Click to see our supportive YouTube video
https://youtu.be/ceaOYnofY5k
Belt adjustments
The performance of your treadmill is dependent on the frame running
on a reasonably level surface. If the frame is not level, the front and
back roller cannot run parallel, and constant belt adjustment may be
necessary.
The treadmill is designed to keep the running belt reasonably centred
while in use. It is normal for some belts to drift near one side while
the belt is running with no one on it. After a few minutes of use,
the running belt should have a tendency to centre itself. If, during
use, the belt continues to move toward one side, adjustments are
necessary.
EXCEPTION
During rehabilitation where the user is using one leg much stronger
than the other, it might happen that the running belt drifts to one
side. In these cases you should not adjust unless the running belt
does not centre itself during normal condition usage.
Belt tension adjustment
Adjustment must be made from the rear roller. The adjustment bolts
are located at the end of the step rails in the end caps.
- Tighten the rear roller bolts (clockwise) only enough to prevent
slippage at the front roller. Turn both running belt tension
adjustment bolts in increments of 1/4 turn each and inspect for
proper tension by walking on the belt at a low speed, making sure
the belt does not slip. Keep tensioning the bolts until the belt
stops slipping.
- If you feel the belt is tight enough, but it still slips, the problem
may be a loose Motor drive belt under the front cover.
- Do Not Over-tighten
Over tightening will cause belt damage and premature bearing
failure.
Click to see our supportive YouTube video
https://youtu.be/pp4_4bL1MXo
Centre the running belt (fig. F-5)
Centre the running belt is needed when your running belt is not
tracking in the centre of your running surface. This is noticed easily
when the gap between side landing and running belt is significantly
bigger on one side compared to the other side.
This can be caused by a few reasons, such as:
REASON 1
You do a workout using one leg more powerful in push off during
your workout. This causes the belt being pushed aside, but will
correct automatically when let the running belt run unloaded for a few
minutes.
REASON 2
Your treadmill is not levelled horizontally, where gravity pulls the
running belt slowly to the lowest end of the treadmill. This must be
corrected by levelling the treadmill correctly. as this cannot be solved
by any other adjustment.
REASON 3
The running belt is not centred correctly between the front and rear
roller drum. This needs be corrected by adjusting the running belt
tracking as described below.
To adjust the running belt’s tracking use the Allen key being provided
with your treadmill.
- Set your treadmill at a speed of ± 5 km/h, not running on it.
- When the running belt is tracking to the right side.
Turn the left-hand rear roller adjustment bold, located on the rear
end in a socket in the rear roller cover, counter clockwise for 1/4
turn.
- When the running belt is tracking to the left side.
Turn the right-hand rear roller adjustment bold, located on the rear
end in a socket in the rear roller cover, counter clockwise for 1/4
turn.
- Await ±2 minutes to give the running belt the time to respond to
the adjustment before repeating the adjustment steps if needed to
get to the desired result.
24
English

Chat with your Tunturi Centuri T100 manual using AI

Get instant AI answers from your Tunturi Centuri T100 manual

Ask anything about the Tunturi Centuri T100. Answers come from this manual, with the pages they are based on.

Centuri T100 Maintenance Schedule

Remind me when maintenance is due
Monthly
Perform general maintenance check

The manual states the trainer requires monthly maintenance even when not in use. Unplug power before starting.

Show in the manual (page 23)
Monthly
Vacuum underneath treadmill

Unplug the power cord and vacuum under the treadmill to prevent dust and pet hair from blocking air inlets.

Show in the manual (page 23)
Monthly
Clean running deck and belt

Wipe the edge of the belt and area between belt and frame with a dry cloth. Use a nylon brush on the belt surface.

Show in the manual (page 23)
Monthly
Verify running belt lubrication

Check if the belt moves smoothly. If dusty or rough, apply approx 10ml lubricant under the belt center.

Show in the manual (page 24)
After each use
Clean equipment with soft cloth

Wipe down the equipment with a soft, absorbent cloth after every use to remove sweat and dirt.

Show in the manual (page 23)
Regularly
Vacuum visible parts

Use a vacuum cleaner with a small suction nozzle to clean visible parts of the equipment regularly.

Show in the manual (page 23)
Regularly
Check tightness of screws and nuts

Inspect all screws and nuts periodically to ensure they remain tight and secure.

Show in the manual (page 23)
Every 300 hours
Check lubrication condition

The console displays 'OIL' and beeps every 10 seconds after 300 operating hours to remind you to check lubrication.

Show in the manual (page 24)
As needed
Adjust belt tracking

Center the running belt using the Allen key if it drifts to one side during use. Adjust rear roller bolts in 1/4 turns.

Show in the manual (page 24)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend Centuri T100?

Yes No

Frequently Asked Questions

A

The treadmill is designed to support a maximum user weight of 135 kg or 300 lbs. Exceeding this limit may damage the equipment and void the warranty.

Is this answer helpful?

A

No, the chest strap is not included in the standard package. It must be purchased separately as an accessory if you prefer wireless heart rate monitoring over the hand sensors.

Is this answer helpful?

A

When the OIL message appears, press and hold the STOP button for at least three seconds during the acoustic warning signal to clear the message and reset the timer.

Is this answer helpful?

A

Yes, the console supports Bluetooth connectivity for both iOS and Android devices, allowing you to sync your workout data with compatible fitness applications.

Is this answer helpful?

A

Assembly requires at least two people due to the weight of the frame. Following the illustrated steps in the manual carefully will ensure proper setup and safety.

Is this answer helpful?

A

If the safety key is pulled out of the console slot, the treadmill will stop immediately to prevent injury. The console will also display an E7 error code until the key is reinserted.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Maximum user weight capacity of 135 kg ensures stability for heavier users
  • 36 pre-set programs plus 3 user-defined options offer diverse workout variety
  • Bluetooth connectivity enables seamless integration with fitness apps and devices
  • Foldable design with transport wheels simplifies storage and relocation
  • Incline range of 0 to 15 levels adds intensity and simulates outdoor terrain
VS

Disadvantages

  • Hand pulse sensors may lose accuracy if skin is too dry or sweaty
  • Heart rate chest strap is sold separately as an accessory
  • Lubrication reminder requires manual reset after application
  • Assembly requires at least two people due to heavy components
  • Console display may freeze if exposed to direct sunlight or sweat
M: QW-35-FL

Product Specification

Colors

black, gold

Power output

5 HP continuous

Speed

0.5-12.4 mph

Incline

0-15% electronically adjustable

Running surface

55x20 in

Max user weight

220 lbs

Dimensions

70x33x56 in

Folded size

40x33x61 in

Weight

181.88 lbs

Features

transport wheels, pulse grip sensors, chest strap compatible, bottle holder, app support (iOS, Android), Bluetooth, foldable

M: QW-35-FL

Product Description

Discover the Tunturi Centuri Performance T100 Laufband

The Tunturi Centuri Performance T100 Laufband represents a significant step forward in home fitness technology, designed to accommodate users of all levels. Whether you are a beginner looking to start your journey or an advanced athlete seeking challenging workouts, this treadmill offers the versatility needed for effective training. The manual highlights its robust construction and user-friendly interface, making it an ideal choice for those who value quality and performance.

This treadmill features a powerful motor capable of speeds ranging from 0.8 to 20.0 km/h, ensuring that every workout can be tailored to specific goals. With 36 pre-set programs and three customizable user profiles, you can easily vary your routine to prevent boredom and maximize results. The incline function allows for up to 15 levels of adjustment, simulating hill climbs and increasing the intensity of your cardio sessions without needing to increase speed excessively.

Safety is paramount with the Tunturi Centuri Performance T100 Laufband Manual guidelines. The console includes essential safety features such as a magnetic safety key that instantly stops the machine if dislodged. Additionally, the hand pulse sensors provide real-time heart rate monitoring, helping you stay within your target zone. For more accurate data, the unit supports Bluetooth connectivity with external chest straps and mobile apps, allowing you to track your progress seamlessly on iOS and Android devices.

Maintenance is straightforward thanks to the built-in reminders for belt lubrication and cleaning instructions found in the documentation. The foldable design saves valuable space when not in use, while the transport wheels facilitate easy movement around your home. With a maximum user weight capacity of 135 kg, this treadmill ensures durability and stability for years of reliable service.

M: QW-35-FL

© Copyright 2026 Manual.ly