Manual.ly Logo

TFA Dostmann Weatherhub Radio Pool Thermometer Manual

0

PDF manual · 2 Pages

English

page

/ 2

Download
Search
Loading...
1281-tfa-dostmann-weatherhub-manual page 2
WeatherHub Sensor
This sensor is a component of the „WeatherHub“ system for measuring air temperature and humidity (indoor or outdoor) and water
temperature, it can be used with this system only. To use the sensor you need an installed WeatherHub gateway.
Before you use it:
Please be sure to read this short-instruction manual carefully.
Following the instruction manual for use will prevent damage to the device and loss of your statutory rights arising from defects due to
incorrect use.
We shall not be liable for any damage occurring as a result of not following these instructions. Likewise, we take no responsibility for any
incorrect readings and for any consequences which may result from them.
Please take particular note of the safety advice!
Please look after this manual for future reference.
For your safety:
• The product is exclusively intended for the eld of application described above. The product should only be used as described
within these instructions.
• Unauthorised repairs, modications or changes to the product are prohibited.
Caution!
Risk of injury:
• Keep this instrument and the batteries out of reach of children.
• Batteries must not be thrown into the re, short-circuited, taken apart or recharged. Risk of explosion!
• Batteries contain harmful acids. Low batteries should be changed as soon as possible to prevent damage caused by a leaking
battery. Never use a combination of old and new batteries together or batteries of different types.
• Remove the batteries if you do not use the product for a lengthy period.
• Wear chemical-resistant protective gloves and glasses when handling leaked batteries.
Important information on product safety!
• Do not place your device near extreme temperatures, vibrations or shocks.
• Clean the instrument with a soft damp cloth. Do not use solvents or scouring agents.
Sensor set up
• Open the battery cover of the thermo-hygro sensor.
• Hold the body of the pool sensor and unlock the upper part by turning it counter clockwise and separate it carefully from the
body.
• First, insert 2 x 1,5 V AA batteries in the thermo-hygro sensor.
• Then insert 2 x 1,5 V AA batteries in the pool sensor. Observe the correct polarity (see marking).
• Close the battery cover of the thermo-hygro sensor and screw the two parts of the pool sensor together again. Ensure that
the cover is at and sufciently tight secured (markings should correspond). This will prevent water from entering the battery
compartment and subsequently damage the unit.
• In order to ensure sufcient transmission however, the distance between the thermo-hygro sensor and the gateway should not
be more than 100 meters and 25 meters to the pool sensor (in water).
Application
Placed outside, choose a shady and dry position for the thermo-hygro sensor. Direct sunshine falsies the measurement and continuous
humidity strains the electronic components needlessly. The thermo-hygro sensor is used to control temperature and humidity in the
indoor or outdoor area, the pool sensor measures the water temperature in the swimming pool, whirlpool or pond.
Add sensor
Open the app, dashboard is displayed. Tap „Add new sensor“ and scan the QR code on the back of the sensor. A copy of the sensor code
is attached. Then set a name for the sensor.
Battery replacement
The battery status of the thermo-hygro sensor will be shown by the WeatherHub app.
Replace the batteries of the pool sensor when the battery symbol appears in the display of the pool sensor.
Please note: When the batteries are changed, the contact between thermo-hygro sensor and pool sensor must be restored – so
always restart both devices.
Specications
Batteries thermo-hygro sensor: 2 x mignon (LR06, AA)
Batteries pool sensor: 2 x mignon (LR06, AA)
Measuring range temperautre: – 40°C … +40°C (-39,8 … 139,8°F)
Measuring range humidity: 0% … 99% rH
Accuracy temperature: +/- 1°C (0 ... 50°C) rest 2,5°C
Accuracy humidity: +/- 3% (from 20% ... 80% rH) rest +/- 5%
Measuring range pool sensor: 0°C ... 60°C (32 ... 140°F)
Measuring interval: 30 seconds
Transmitting interval: 7 minutes
Frequency thermo-hygro sensor: 868,3 Mhz
Transmitting range pool to transmitter: 25m (free eld)
Transmitting range to Gateway: 100m (free eld)
Maximum radio-frequency power: < 25mW
Do not dispose of batteries or rechargeable batteries in the household waste!
As a consumer, you are legally required to take them to your retail store or to appropriate
collection sites according to national or local regulations in order to protect the environment.
The symbols for the heavy metals contained are: Cd=cadmium, Hg=mercury, Pb=lead
This instrument is labelled in accordance with the EU Waste Electrical and Electronic Equipment Directive (WEEE).
Please do not dispose of this product with other household waste. The user is obligated to take end-of-life devices to
a designated collection point for the disposal of
electrical and electronic equipment, in order to ensure environmentally-compatible disposal.
More information and detailed instructions can be found in the app at “Info” or on
www.tfa-dostmann.de/weatherhub.
03/2020
Quick reference
30.3310.02 Thermo-Hygro sensor
and pool sensor
Waste disposal
This product has been manufactured using high-grade materials and components which can be recycled and reused.
EU Declaration of conformity
Hereby, TFA Dostmann declares that the radio equipment type 30.3310.02 is in compliance with Directive 2014/53/EU. The full text of
the EU declaration of conformity is available at the following internet address:
www.tfa-dostmann.de/service/downloads/ce
TFA Dostmann GmbH & Co.KG, Zum Ottersberg 12, D-97877 Wertheim, Germany
Commercial registration number: Reg. Gericht Mannheim HRA 570186
No part of this manual may be reproduced without written consent of TFA Dostmann.
The technical data are correct at the time of going to print and may change without prior notice.
The latest technical data and information about your product can be found by entering
your product number on our homepage.

Advantages and Disadvantages

Advantages

  • Monitors water, air temperature, and humidity in one system
  • Easy app setup via QR code with remote access
  • Accurate readings with clear specified tolerances
  • Robust range: 25 m pool-to-sensor, 100 m to gateway
  • Regular sampling and transmission for timely updates
VS

Disadvantages

  • Requires separate WeatherHub gateway to operate
  • Pool sensor must be tightly sealed to avoid damage
  • Transmission depends on distance and obstacles
  • Battery replacement requires re-pairing both units
  • Not intended for use outside specified temperature ranges

Ask a Question

Manual.ly information here
0/1000

Do you recommend Weatherhub?

Frequently Asked Questions

A

It measures pool water temperature via the floating pool sensor and air temperature plus humidity via the thermo-hygro sensor, delivering data to the WeatherHub app.

Is this answer helpful?

A

Yes. The sensors operate exclusively with the WeatherHub gateway and app. Without the gateway, data cannot be transmitted or viewed.

Is this answer helpful?

A

Up to 25 meters from pool sensor to the thermo-hygro transmitter in water, and up to 100 meters from the transmitter to the WeatherHub gateway in free-field conditions.

Is this answer helpful?

A

Open the WeatherHub app, tap Add new sensor, and scan the QR code on the sensor. Assign a name and confirm. A copy of the code is usually included.

Is this answer helpful?

A

Air temperature: -40°C to +60°C, typically ±1°C (0–50°C). Humidity: 0–99% rH, ±3% (20–80% rH). Water temperature: 0–60°C. Intervals: 30 s measurement, 7 min transmission.

Is this answer helpful?

A

Use two AA batteries per sensor. When replacing, restart both sensors to re-establish the link. Keep the pool sensor cap firmly sealed to prevent water ingress.

Is this answer helpful?

A

Install it in a shaded, dry, and ventilated area to avoid direct sun and constant moisture, which can distort readings and strain electronics.

Is this answer helpful?

Product Description

Product pic

TFA Dostmann Weatherhub Radio Pool Thermometer Manual

Smart Pool and Climate Monitoring for Your Home

Reliable Water and Air Insights, Anywhere

The TFA Dostmann Weatherhub Radio Pool Thermometer pairs a floating pool sensor with a thermo-hygro sensor to deliver accurate water temperature, air temperature, and humidity data straight to your phone via the WeatherHub gateway. Whether you manage a swimming pool, hot tub, or garden pond, this system keeps you informed with dependable metrics, so you can optimize comfort and maintenance.

Powered by AA batteries, setup is straightforward: insert batteries in both sensors, ensure the pool sensor cap is firmly sealed, and scan the QR code in the WeatherHub app to add the device. For best performance, place the thermo-hygro sensor in a shaded, dry spot and keep distances within 25 m from pool sensor to transmitter and up to 100 m to the gateway (free field). The system samples every 30 seconds and transmits approximately every 7 minutes, balancing responsiveness with battery life.

The TFA Dostmann Weatherhub Radio Pool Thermometer Manual emphasizes proper installation, battery care, and safety. Accurate ranges include -40°C to +60°C for air and 0°C to 60°C for water, with humidity from 0–99% rH. Temperature accuracy is typically ±1°C (0–50°C) and humidity ±3% rH (20–80% rH). Designed for everyday use, it’s robust enough for outdoor environments when installed correctly.

If you’re seeking a dependable, app-connected solution for monitoring pool water and local climate, this system offers clarity and control—ideal for keeping your pool inviting, protecting equipment, and making data-driven adjustments throughout the season.

Notes:

  • Requires a WeatherHub gateway and app.
  • Replace both devices’ batteries together to re-establish the link.
  • Keep pool sensor cap tightly sealed to prevent moisture damage.\nNo reviews were provided.

Search for 1. Mio Manuals online

Search Subtract

Type-in Brand or Model

© Copyright 2024 Manual.ly