Manual.ly Logo

Testo 890 Manual

0.0 · 0 Ratings

PDF manual · 82 Pages

English

M: qwen/qwen3.5-flash-20260224
page

/ 82

Loading...
e8d4c96c9e79e1a273e196a61425c0974152 page 12
3 Leistungsbeschreibung
18
Co-location
Ce transmetteur ne peut pas être installé en colocation ou être utilisé avec une autre antenne ou
transmetteur, quel qu'en soit le type.
FCC Warnings
Information from the FCC (Federal Communications Commission)
For your own safety
Shielded cables should be used for a composite interface. This is to ensure continued protection
against radio frequency interference.
FCC warning statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment. Shielded interface cable must be used in
order to comply with the emission limits.
Warning
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation
.
Caution: Radio Frequency Radiation Exposure
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment should
be installed and operated keeping the radiator at least 20 cm or more away from person´s body in
normal use position.

Chat with your Testo 890 manual using AI

Get instant AI answers from your Testo 890 manual

Ask anything about the Testo 890. Answers come from this manual, with the pages they are based on.

890 Maintenance Schedule

Remind me when maintenance is due
Yearly
Calibrate the camera

Have the device calibrated by Testo Service or an authorized partner to ensure measurement accuracy.

Show in the manual (page 81)
As needed
Clean the display

Wipe the display with a cleaning cloth like microfiber when dirty. Do not use sharp cleaning agents.

Show in the manual (page 79)
As needed
Clean the camera housing

Clean the housing with a damp cloth. Mild household cleaners or soapy water may be used.

Show in the manual (page 79)
As needed
Clean the lens and protective glass

Remove dust with a clean optical brush. For light dirt, use a lens cleaning cloth. Do not use cleaning alcohol.

Show in the manual (page 79)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend 890?

Yes No

Frequently Asked Questions

A

The FPA detector has a resolution of 640 x 480 pixels, which provides high-quality thermal imaging for accurate temperature analysis and detailed visualization.

Is this answer helpful?

A

The standard range varies by model configuration, but with optional upgrades it can measure temperatures up to 1200 degrees Celsius for specialized industrial applications.

Is this answer helpful?

A

Yes, the unit is designed to function reliably in outdoor conditions with a specified operating temperature range from negative 15 to 50 degrees Celsius depending on the model.

Is this answer helpful?

A

Yes, it supports recording radiometric video sequences via USB connection for detailed analysis later using dedicated PC software tools and platforms.

Is this answer helpful?

A

The battery offers approximately 4.5 hours of runtime under normal operating conditions, allowing for extended field work without frequent interruptions.

Is this answer helpful?

A

Please check with the official manufacturer service department for specific warranty terms applicable to new units purchased in your region.

Is this answer helpful?

A

Yes, optional features include moisture detection capabilities, adding specific value for construction inspections and safety officers in large sectors.

Is this answer helpful?

M: qwen/qwen3.5-flash-20260224

Advantages and Disadvantages

Advantages

  • FPA detector provides 640 x 480 resolution for superior thermal image clarity and detail.
  • Dual control interface combines touchscreen and joystick for flexible and responsive operation.
  • IP54 casing protects against dust and water for reliable performance in harsh industrial environments.
  • Lithium-ion battery supports up to 4.5 hours of continuous use per single charge cycle.
  • Optional lenses including telephoto and super telephoto expand range and detail capabilities significantly.
VS

Disadvantages

  • Lithium-ion battery charging requires strict adherence to ambient temperature safety limits.
  • Touchscreen operation requires direct finger contact which fails when wearing heavy winter gloves.
  • Advanced features like SuperResolution require separate software codes and PC software installation.
  • Standard measurement range is limited compared to industrial furnaces without specialized upgrades.
  • Bluetooth functionality is restricted in certain countries due to local certification regulations.
M: qwen/qwen3.5-flash-20260224

Product Specification

Camera

640x480 (Max. Sensor Resolution), 480x272 (Max. Display Resolution), 42 deg (Horizontal Viewing Angle), 32 deg (Vertical Viewing Angle)

Display

Yes

Features

SD Card, USB, 3x Digital Zoom, Laser Spot

Power Supply

Battery Powered (Li-Ion)

Ingress Protection

IP54

Dimensions

9.96x4.37x5.20in (WxHxD)

Weight

3.59 lbs

M: qwen/qwen3.5-flash-20260224

Product Description

Testo 890 Thermal Imaging Camera Overview

The Testo 890 Thermal Imaging Camera stands as a robust tool for professionals requiring precise non-contact temperature measurement capabilities. This versatile unit allows users to determine surface temperature distributions effectively across diverse environments. Its compact design ensures portability while delivering high performance during critical inspections. Industries ranging from building diagnostics to heavy industrial maintenance rely on these advanced capabilities for accurate data collection. High standards apply to all testing procedures.

One of the standout features involves the sensor technology utilized within the device. It utilizes a high-resolution FPA detector providing detailed thermal images with excellent clarity. Users can select between standard, telephoto, or super telephoto lenses depending on the distance required for specific measurement tasks. The optional high temperature range extends capabilities significantly up to twelve hundred degrees Celsius for specialized industrial applications requiring extreme heat analysis. Accuracy remains paramount throughout operation with specific tolerances noted for different measurement ranges.

Operation is simplified through a responsive touchscreen interface complemented by a traditional joystick system. This dual control scheme allows for efficient one-handed operation or quick menu navigation via clear touch gestures. A bright LCD display ensures readability in diverse lighting conditions whether outdoors or indoors. Power consumption is managed efficiently with a rechargeable lithium-ion battery offering approximately four and a half hours of continuous runtime. This duration supports extended field work sessions without frequent interruptions for battery recharging cycles.

Data management is highly flexible with robust support for SD card storage and various export formats. Users can save images in standard formats for easy sharing or proprietary formats for detailed analysis using dedicated PC software tools. Optional features like moisture detection and fever detection assistants add specific value for construction inspectors and safety officers in large sectors. Site recognition helps organize captured images geographically for better project documentation. Bluetooth connectivity enables audio commentary recording directly via supported headsets for enhanced reporting. Additional accessories enhance functionality significantly.

Protecting itself against dust ingress and water splashes, the unit meets IP54 standards for rugged field use. The camera maintains functionality even in challenging environments where other devices might fail. Calibration and maintenance procedures are straightforward following specific guidelines provided by the manufacturer. Whether checking insulation efficiency or monitoring electrical machinery heat, this device provides reliable visual data. It remains an essential asset for quality assurance teams and preventive maintenance strategies in modern enterprises globally. Protecting itself against dust ingress ensures longevity.

Important Notes

Always verify lens compatibility before purchase. Ensure battery is fully charged before first use. Keep guidelines safe for future reference. Safety first, always follow guidelines.

M: qwen/qwen3.5-flash-20260224

© Copyright 2026 Manual.ly