Manual.ly Logo

Telwin Superior TIG 422 AC/DC AQUA Manual

0.0 · 0 Ratings

PDF manual · 156 Pages

English

M: QW-35-FL
page

/ 156

Loading...
e161bcc67b445dc396f916526252b81a2f65 page 6
- 6 -
its advantages of easy handling and transport.
2.2OPTIONALACCESSORIES
- Argon bottle adapter.
- Welding current return cable complete with earth clamp.
- Manual remote control with 1 potentiometer.
- Manual remote control with 2 potentiometers.
- Pedal remote control.
- MMA welding kit.
- TIG welding kit.
- Self-darkening mask: with xed or adjustable lter.
- Gas connector and pipe for hook-up with Argon bottle.
- Pressure reducing valve with gauge.
- Torch for TIG welding.
3.TECHNICALDATA
3.1DATAPLATE(FIG.A)
The most important data regarding use and performance of the welding machine are
summarised on the rating plate and have the following meaning:
1- Protection rating of the covering.
2-Symbol for power supply line:
1~: single phase alternating voltage;
3~: three phase alternating voltage.
3-Symbol S: indicates that welding operations may be carried out in environments
with heightened risk of electric shock (e.g. very close to large metallic volumes).
4-Symbol for welding procedure provided.
5-Symbol for internal structure of the welding machine.
6- EUROPEAN standard of reference, for safety and construction of arc welding
machines.
7-Manufacturer’s serial number for welding machine identication (indispensable for
technical assistance, requesting spare parts, discovering product origin).
8-Performance of the welding circuit:
- U
0
: maximum no-load voltage (open welding circuit).
- I
2
/U
2
: current and corresponding normalised voltage that the welding machine
can supply during welding.
-X : Duty cycle: indicates the time for which the welding machine can supply
the corresponding current (same column). It is expressed as %, based on a 10
minutes cycle (e.g. 60% = 6 minutes working, 4 minutes pause, and so on).
If the usage factors (on the plate, referring to a 40°C environment) are exceeded,
the thermal safeguard will trigger (the welding machine will remain in standby until
its temperature returns within the allowed limits).
-A/V-A/V : shows the range of adjustment for the welding current (minimum
maximum) at the corresponding arc voltage.
9-Technical specications for power supply line:
- U
1
:Alternating voltage and power supply frequency of welding machine (allowed
limit ±10%).
- I
1max
: Maximum current absorbed by the line.
- I
1eff
: Effective current supplied.
10-
:Size of delayed action fuses to be used to protect the power line.
11- Symbols referring to safety regulations, whose meaning is given in chapter 1
“General safety considerations for arc welding”.
Note: The data plate shown above is an example to give the meaning of the symbols
and numbers; the exact values of technical data for the welding machine in your
possession must be checked directly on the data plate of the welding machine itself.
3.2OTHERTECHNICALDATA
-WELDINGMACHINE:seetable1(TAB.1).
-TORCH: seetable2(TAB.2).
Theweldingmachineweightisshownintable1(TAB.1).
4.DESCRIPTIONOFTHEWELDINGMACHINE
4.1BLOCKDIAGRAM
The welding machine consists basically of power and control modules made on PCB’s
and optimised to achieve perfect reliability and reduced maintenance.
This welding machine is controlled by a microprocessor that allows a large number
of parameter settings so as to achieve perfect welding in any condition and with any
material. However, to make the best use of its properties it is necessary to be fully
aware of its possibilities.
Description(FIG.B)
1- Singlephasepowersupplyinput,rectierunitandlevellingcapacitors.
2- Transistor(IGBT)switchingbridgeanddrivers;commutes the rectied power
supply voltage to high frequency alternating voltage and adjusts the power
according to the required welding current/voltage.
3- High frequency transformer; the voltage converted by block 2 powers the
primary winding; its function is to adjust the voltage and current to the values
needed for the arc welding procedure and at the same time to form galvanic
separation of the welding circuit from the power supply line.
4- Secondaryrectierbridgewithlevellinginductance;commutes the alternating
voltage / current supplied by the secondary winding into very low ripple direct
current / voltage.
5- Transistor (IGBT) switching bridge and drivers; transforms the secondary
output current from DC to AC for TIG AC welding (if present).
6- Control and adjustment electronics; controls the welding current value
instantaneously and compares it with the operator’s setting; modulates the control
impulses from the IGBT drivers that make the adjustment.
7- Weldingmachineoperationcontrollogic; sets the welding cycles, controls the
actuators, supervises the safety systems.
8- Settingspaneland display of parameters and operating modes.
9- HFstrikegenerator(if present).
10-ProtectivegassolenoidvalveEV.
11- Weldingmachinecoolingfan.
12-Remotecontrol.
4.2CONTROL,ADJUSTMENTANDCONNECTIONDEVICES
4.2.1BACKPANEL(FIG.C)
1- Power supply cable (2P + P.E) (1~); (3P + P.E) (3~).
2- Main switch O/OFF - I/ON.
3- Gas pipe connector (bottle pressure reducing valve welding machine).
4- Remote control connector:
Using the special 14-pin connector on the back, it is possible to attach 3 different
types of remote control to the welding machine. Each device will be recognised
automatically and can be used to adjust the following parameters:
-Remotecontrolwithonepotentiometer:
turning the potentiometer knob will change the main current from the minimum to
the maximum. The main current is adjusted only and exclusively by the remote
control.
-Pedalremotecontrol:
The current value is determined by the position of the pedal. In addition, in TIG
2-STROKE mode pressing the pedal gives the start command to the machine
instead of the torch button.
-Remotecontrolwithtwopotentiometers:
the rst potentiometer adjusts the main current. The second potentiometer
adjusts another parameter, depending on the active welding mode. When this
potentiometer is turned the display will show the changing value of the parameter
(which can no longer be controlled with the knob on the panel). The meaning of
the second potentiometer is: ARC FORCE if in MMA mode and END SLOPE if
in TIG mode.
-ControllerforTIGtorchwithpotentiometer(whereapplicable):
the TIG controller enables current adjustment using the torch with potentiometer.
4.2.2FrontpanelFIG.D1
1- Positive (+) quick latch to connect the welding cable.
2- Negative (-) quick latch to connect the welding cable.
3- Connector for connecting the torch pushbutton cable.
4- Fitting for connecting the gas pipe of the TIG torch.
5- Controls panel.
6- Welding modes selection pushbuttons:
6a
REMOTE COMMAND
Allows the transfer of the control of the welding parameters to the remote
control.
6b
MMA-TIG LIFT
Operating mode: coated electrode welding (MMA), and TIG welding with
contact arc lift strike (TIG LIFT).
7- Pushbuttonfortheselectionofparameterstobeset.
Button
selects the parameter to be adjusted through Encoder knob (8);
the value and unit of measure are visualised respectively on display (10) and led
(9).
N.B.: Setting of parameters is free. However, there are value combinations that
have no practical meaning for the welding; in this case the welding machine could
operate incorrectly.
N.B.: RE-SETTINGOFALLFACTORYPARAMETERS(RESET)
By pressing pushbutton (7)at switch-on, all welding parameters are returned to
default value.
7a
HOT START
In the MMA mode, this represents the “HOT START” initial over-current
(adjustment range 0÷100) with indication on display of the percentage
increment of the selected welding current. This adjustment improves start-up.
7b
MAIN CURRENT (I
2
)
In TIG mode, MMA represents the welding current, measured in Amperes.
7c ARC-FORCE
In MMA mode, it represents the dynamic “ARC-FORCE” over-current
(adjustment range 0÷100%) with indication on display of the percentage
increment in relation to the pre-selected welding current’s value. This
adjustment improves the weld uidity, avoids the electrode sticking to the piece
being welded and allows the use of different types of electrodes.
7d
END SLOPE (t
e
)
In TIG mode, it represents the time for the end slope (adjustment range
0.1÷10sec.); it avoids the weld seam’s end crater (from I
2
to 0).
7e
POSTGAS
In TIG mode, it represents the time for postgas in seconds (adjustment range
0.1÷25sec.); it protects the weld pool from oxidation.
8- Encoder knob for setting the welding parameters, selectable by means of
pushbutton (7).
9- Red led, indication of the unit of measure.
10- Alphanumeric display.
11- ALARM-signallingLED(themachineisblocked).
Reset is automatic upon cessation of the cause that triggered the alarm.
Alarm messages appearing on display (10):
-”A.1” : primary circuit thermal protection tripping.
-”A.2” : secondary circuit thermal protection tripping.
-”A.3” : power supply line protection against over-voltage tripping.
-”A.4” : power supply line protection against under-voltage tripping.
-”A.5” : primary over-temperature protection tripping.
- ”A.6” : protection tripping for power supply line phase missing.
- ”A.7” : excessive deposit of dust within the welding machine, resetting by:

Chat with your Telwin Superior TIG 422 AC/DC AQUA manual using AI

Get instant AI answers from your Telwin Superior TIG 422 AC/DC AQUA manual

Ask anything about the Telwin Superior TIG 422 AC/DC AQUA. Answers come from this manual, with the pages they are based on.

Superior TIG 422 AC/DC AQUA Maintenance Schedule

After use
Close the gas bottle valve

Always close the gas bottle valve at the end of the job to ensure safety and prevent leaks.

As needed
Clean internal dust deposits

If alarm A.7 triggers due to excessive dust, perform inner cleaning of the machine and reset via the control panel display button.

M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend Superior TIG 422 AC/DC AQUA?

Yes No

Frequently Asked Questions

A

No, this Class A equipment is designed exclusively for industrial and professional use. It does not guarantee compliance with electromagnetic compatibility limits for domestic environments.

Is this answer helpful?

A

It handles low-carbon steels, stainless steel, aluminum, copper, nickel, titanium, and their alloys using TIG DC, TIG AC, and MMA processes.

Is this answer helpful?

A

You can save up to nine personalized programs by adjusting parameters and pressing the SAVE button for three seconds, then selecting a number slot.

Is this answer helpful?

A

Check the display code (e.g., A.1 for thermal protection). Reset is often automatic once the cause is fixed, but some alarms require manual cleaning or button resets.

Is this answer helpful?

A

Remote controls are optional accessories. The machine has a connector for one-potentiometer, two-potentiometer, or pedal remote controls.

Is this answer helpful?

A

Yes, it supports G.R.A. water cooling units. You must enable this mode in the settings if a cooling unit is connected.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Advanced inverter technology ensures high efficiency and precise control
  • Versatile capabilities support both TIG AC/DC and MMA welding processes
  • Microprocessor control allows for extensive parameter customization and storage
  • Compact and lightweight design facilitates easy transport and handling
  • Comprehensive safety features include thermal protection and alarm memory
VS

Disadvantages

  • Not recommended for domestic use due to electromagnetic field emissions
  • Requires qualified personnel for installation and electrical connections
  • Water cooling system requires additional setup and monitoring if used
  • Complex parameter settings may require a learning curve for beginners
  • Strict adherence to safety protocols is mandatory for operator health
M: QW-35-FL

Product Specification

Power

14kW (400V)

Open Circuit Voltage

64V

Regulation Range

5-350A (MMA/WIG)

Electrodes

1.6-6mm (MMA)

Protection Class

IP23

Dimensions

47x36.8x19.7in (HxWxD)

Weight

156.52lbs

M: QW-35-FL

Product Description

Telwin Superior TIG 422 AC/DC AQUA: The Professional Inverter Welding Solution

The Telwin Superior TIG 422 AC/DC AQUA MMA/WIG Inverter Welding Machine stands as a pinnacle of modern welding technology, designed specifically for demanding industrial and professional environments. This versatile unit combines the precision of Tungsten Inert Gas (TIG) welding with the robustness of Manual Metal Arc (MMA) welding in a single, compact chassis. Utilizing advanced inverter technology, the machine achieves high-speed and precise adjustments, ensuring excellent weld quality across various materials including steel, stainless steel, aluminum, copper, nickel, and titanium.

Its innovative design significantly reduces the volume of internal components like transformers and reactors, resulting in a lighter and more portable device without compromising power. The machine features a microprocessor-controlled system that allows for extensive parameter customization, making it suitable for complex welding tasks ranging from thin sheet metal to heavy structural components. Operators can choose between High Frequency (HF) or Lift start methods for TIG welding, offering flexibility depending on the specific application requirements.

Safety is paramount in the design of this equipment. It includes comprehensive protection systems against thermal overload, over-voltage, under-voltage, and phase failure. The unit also incorporates an alarm memory feature that records the last ten operational errors, aiding in quick troubleshooting and maintenance. For users requiring water-cooled torches, the machine supports G.R.A. units, with easy enabling and disabling protocols to ensure safe operation.

The interface is user-friendly, featuring a clear alphanumeric display and intuitive controls for setting parameters such as main current, arc force, hot start, post-gas time, and pulse frequencies. Users can save up to nine personalized programs, allowing for instant recall of optimized settings for repetitive jobs, thereby increasing productivity and consistency.

Important Safety Notes

Always wear appropriate protective clothing, including gloves, eye protection, and masks to guard against ultraviolet radiation, fumes, and sparks. Ensure the machine is connected to a properly earthed power supply and avoid using it in damp conditions. Do not use the handle for hanging the machine, and keep unauthorized personnel away during operation.

Pros and Cons

Pros

  • Advanced inverter technology ensures high efficiency and precise control.
  • Versatile capabilities support both TIG AC/DC and MMA welding processes.
  • Microprocessor control allows for extensive parameter customization and storage.
  • Compact and lightweight design facilitates easy transport and handling.
  • Comprehensive safety features include thermal protection and alarm memory.

Cons

  • Not recommended for domestic use due to electromagnetic field emissions.
  • Requires qualified personnel for installation and electrical connections.
  • Water cooling system requires additional setup and monitoring if used.
  • Complex parameter settings may require a learning curve for beginners.
  • Strict adherence to safety protocols is mandatory for operator health.
M: QW-35-FL

© Copyright 2026 Manual.ly