Manual.ly Logo

Tamiya Subaru BRZ R&D Sport 2014 TT-02 Manual

0.0 · 0 Ratings

PDF manual · 24 Pages

English

M: OA-GPT-54-NAN
page

/ 24

Loading...
f0ac2f93d2ae73cffa9ba7802e5368e2f685 page 2
●小学生や組み立てになれない方は、模型にくわしい方にお手伝いをお願いしてください。
組み立てる前に用意する物
ITEMS REQUIRED
ERFORDERLICHES ZUBEHÖR
OUTILLAGE NECESSAIRE
2
ESC(FETアンプ)付き2チャンネルプロポ
2-channel R/C unit with electronic speed controller
2-Kanal RC-Einheit mit elektronischem Fahrregler
Ensemble R/C 2 voies avec variateur électronique
《用意する工具》
TOOLS RECOMMENDED
BENÖTIGTE WERKZEUGE
OUTILLAGE
+ドライバー(大)
+
Screwdriver (large)
+
Schraubenzieher (groß)
Tournevis
+
(grand)
+ドライバー(小)
+
Screwdriver (small)
+
Schraubenzieher (klein)
Tournevis
+
(petit)
ラジオペンチ
Long nose pliers
Flachzange
Pinces à becs longs
ニッパー
Side cutters
Seitenschneider
Pinces coupantes
クラフトナイフ
Modeling knife
Modellbaumesser
Couteau de
modéliste
はさみ
Scissors
Schere
Ciseaux
《使用できるサーボの大きさ》
Suitable servo size
Grösse der Servos
Dimensions max
des servos
★標準型サーボをお使いください。小型サーボは搭載出来ません。
★
Use standard size servo. Small size servo cannot be installed.
★
Servos in Standardgröße verwenden. Kleinere Servos können
nicht eingebaut werden.
★
Utiliser un servo de taille standard. Un mini-servo ne peut pas
être installé.
《ラジオコントロールメカ》
このRCカーには、ESC(FETアンプ)付き2チャンネルプロポセ
ット(小型受信機、小型ESC(FETアンプ)、標準型サーボのセ
ットがお勧めです。)をご使用ください。他社製品を使用した
場合、それによって生じた不具合につきましては保証いたしか
ねますのでご了承願います。
★取り扱いについては、それぞれの説明書をご覧ください。
《走行用バッテリー・充電器》
このキットはタミヤ走行用バッテリー専用です。専用充電器と
ともにご用意ください。
RADIO CONTROL UNIT
Standard 2-channel R/C unit plus electronic speed
controller is suggested for this model (combination of
small size receiver, electronic speed controller and
standard size servo is recommended).
★
Read and follow instructions supplied with R/C unit.
POWER SOURCE
This kit is designed to use a Tamiya battery pack. Charge
battery according to manual supplied with battery.
FERNSTEUER-EINHEIT
Für dieses Modell wird eine übliche RC-Einheit mit einem
elektronischen Fahrregler vorgeschlagen (eine Kombina-
tion eines kleinen Empfängers mit elektronischem
Fahrregler und Servo in Normalgröße wird empfohlen).
★
Lesen und befolgen Sie die der RC-Einheit beiliegende
Anleitung.
STOMQUELLE
Für diesen Bausatz benötigt man den Tamiya Akkupack.
Den Akku gemäß Anweisung aufladen.
ENSEMBLE DE RADIOCOMMANDE
Pour piloter ce modèle, nous vous suggérons d’employer
un ensemble de radiocommande 2 voies standard avec
variateur de vitesse électronique (récepteur et variateur de
taille mini et servo de taille standard recommandés).
★
Lire et suivre les instructions fournies avec l’ensemble
R/C.
ALIMENTATION
Le moteur qui équipe ce modèle peut être alimenté par un
pack d’accus Tamiya. Charger le pack selon les
indications du manuel du pack et du chargeur.
ピンセット
Tweezers
Pinzette
Précelles
RCC TT-02 Chassis
(
1
1053610
)
タミヤ・ファインスペック2.4Gプロポ/ESC(FETアンプ)付き
Tamiya FINESPEC 2.4G R/C system
Tamiya FINESPEC 2.4G R/C System
Ensemble R/C Tamiya FINESPEC 2.4G
(※ESCはエレクトロニックスピードコントローラーの略です。)
★小型サイズのESC、受信機をお勧めします。
★
Small size ESC and receiver are recommended.
★
Fahrregler und Empfänger kleiner Größe
werden empfohlen.
★
Récepteur et variateur électronique de petite
taille recommandés.
瞬間接着剤(タイヤ用)
Instant cement
Sekundenkleber
Colle rapide
タミヤ走行用バッテリー
Tamiya Battery Pack
Tamiya Akkupack
Pack d’accus Tamiya
専用充電器
Compatible charger
Geeignetes Ladegerät
Chargeur compatible
★標準型サーボをお使いください。
★
Use standard size servo.
★
Servos in Standardgröße verwenden.
★
Utiliser un servo de taille standard.
★この他に、ヤスリや柔らかい布、ウエス、ノギスがあると
便利です。
★
A file, soft cloth and caliper will also assist in construc-
tion.
★
Beim Zusammenbau können eine Feile, ein weiches Tuch
und ein Meßschieber hilfreich sein.
★
Une lime, un chiffon et un pied à coulisse seront
également utiles.
12〜16㎜
30㎜以下
30mm and below
38〜41㎜
20.5㎜以下
Less than 20.5mm
《
OP.1476 TT-02
フルベアリングセット
》
54476 TT-02 Ball Bearing Set
1150
プラベアリング
Plastic bearing
1050
プラベアリング
Plastic bearing
1280
メタル
Metal bearing
1280 1150 1050
★プラベアリングやメタルを別売のベアリングセットに変える事が出来ます。
★
Kit-included plastic and metal bearings can be replaced with separately-sold ball bearing sets.
★
Die im Bausatz enthaltenen Plastik- und Metallager können durch separat beschaffte Kugellager ersetzt werden.
★
Les paliers en plastique et métal inclus dans le kit peuvent être remplacés par des roulements à billes disponibles séparément.

Chat with your Tamiya Subaru BRZ R&D Sport 2014 TT-02 manual using AI

Get instant AI answers from your Tamiya Subaru BRZ R&D Sport 2014 TT-02 manual

Ask anything about the Tamiya Subaru BRZ R&D Sport 2014 TT-02. Answers come from this manual, with the pages they are based on.

Subaru BRZ R&D Sport 2014 TT-02 Maintenance Schedule

After every run
Clean and dry R/C unit, motor, and battery

Completely remove sand, mud, dirt etc. If wet, clean and dry thoroughly in a dry shaded area.

Show in the manual (page 20)
After every run
Apply grease to suspension, gears, and bearings

Apply grease to moving parts such as suspension, gears, and bearings after running.

Show in the manual (page 20)
Before operation
Check antenna extension

Fully extend the transmitter and receiver antennas before operating the car.

Show in the manual (page 20)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend Subaru BRZ R&D Sport 2014 TT-02?

Yes No

Frequently Asked Questions

A

It explains how to build and set up an on-road RC car based on Tamiya’s TT-02 chassis and the Subaru BRZ R&D Sport 2014 body. It covers assembly, electronics, tuning, and safe operation.

Is this answer helpful?

A

Yes, but beginners may need help. The manual includes detailed steps, yet some parts require careful assembly, tools, and basic RC knowledge. A supervising adult or experienced hobbyist can be useful.

Is this answer helpful?

A

You need a standard 2-channel radio system, an electronic speed controller, a standard-size servo, and a compatible battery pack with charger. These items are not included in the kit.

Is this answer helpful?

A

Yes. The TT-02 layout allows changes to wheelbase, tread, and ground clearance so it can better match different body requirements and driving preferences.

Is this answer helpful?

A

No. It is intended for on-road use only. Gravel, sand, and wet conditions can affect gears, suspension parts, and electronics.

Is this answer helpful?

A

Ball bearings are a popular upgrade for smoother running. You can also change pinion gears, adjust gearing, or add optional parts to improve performance and durability.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Adjustable TT-02 chassis supports different body setups and tuning options.
  • Clear assembly guidance makes it useful for learning RC mechanics.
  • On-road suspension and drivetrain are built for stable, responsive handling.
  • Upgrade paths like bearings and pinion gears add long-term value.
VS

Disadvantages

  • Not suited for off-road use; debris can interfere with moving parts.
  • Requires extra electronics and battery gear that are not included.
  • Small parts and precise assembly may be challenging for beginners.
  • Performance depends heavily on correct setup and maintenance.
M: OA-GPT-54-NAN

Product Specification

Type

Car

Scale

1:10

Drive

Electric motor

M: OA-GPT-54-NAN

Product Description

Tamiya Subaru BRZ R&D Sport 2014 TT-02 Manual

The Tamiya Subaru BRZ R&D Sport 2014 TT-02 Manual introduces a sharp, race-inspired on-road RC build centered on Tamiya’s trusted TT-02 chassis. Designed around the Subaru BRZ R&D Sport 2014 body style, this kit blends realistic styling with a durable platform that is ideal for hobbyists who enjoy assembling, tuning, and learning how an RC car comes together from the ground up.

At the core of the model is the TT-02 chassis, a versatile layout that supports smooth handling and a wide range of setup options. Builders can adjust the wheelbase, ride height, and tread to match the body configuration, making the chassis more adaptable than many entry-level kits. The manual also shows how gearing changes can influence performance, giving users a practical way to experiment with acceleration and speed.

The build emphasizes careful assembly and correct part selection. It includes guidance for suspension, differential gears, steering linkage, dampers, wheels, and motor installation, while reminding users to use standard-size servos and a compatible 2-channel radio system with ESC. The instructions also highlight lubrication points, antenna placement, and battery handling, all of which help the finished car perform reliably on smooth surfaces.

What makes this model appealing is its balance of simplicity and upgrade potential. The kit comes with enough detail to teach RC fundamentals, yet it still leaves room for future improvements such as ball bearings, different pinion gears, and optional parts. That makes it a strong choice for both newcomers and experienced builders who want a solid base for an on-road touring car.

The Subaru BRZ body adds a sporty, modern look that matches the chassis’ performance-minded character. Once assembled, the result is an RC car that feels precise, customizable, and rewarding to drive. It is best suited to clean pavement and controlled environments, where its suspension and steering can shine.

Notes

  • On-road use only; dirt and gravel can damage moving parts.
  • Use the correct servo size and a compatible ESC.
  • Follow the setup guide for wheelbase, tread, and ride height.
  • Battery and transmitter order matters for safe operation.
  • Regular cleaning and greasing help maintain performance.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly