Manual.ly Logo

Swedx SDS50K8-01 Manual

0.0 · 0 Ratings

PDF manual · 24 Pages

English

M: OA-GPT-54-NAN
page

/ 24

Loading...
1c4c1313db02f752207a40fc15bd8dc49a6a page 5
Basic operation
• Use AC 100-240V 50~60 Hz power outlet for
the product power supply
• lf the screen of the product is not on, please
press the power button on the remote control
or on the product
• lf you want to shut off the product temporary,
please press the power button on the remote
control or on the product
• lf you want to shut off the product completely,
please disconnect the power cable
• In Component and AV modes the product
will shut off if there is no signal input for 30
minutes
• ln PC-RGB and HDMI modes the product will
enter idle state if there is no signal input after
30 seconds
• ln Media Player 1/2 modes the product will
remain On if there is no signal input
• The setting and tuning of picture and sound
will be saved when the product is shut off,
which will be working in the pre-shut off state
when the product is turned on again
• lf PC signal source is used, please first set
the resolution of the PC display card as the
following modes:
For HDMI 1/2/3 (3840x2160 @ 60Hz)
For PC (1920 x 1080 @ 60Hz)
• lf there is progressive output of the signal
used by the user, signal source with
progressive output is recommended
Preparation
• Put the product on a stable surface
• Do not fix the product with others fixations than
those provided or suggested by the
manufacturer
• If you have a wall mount, check that it is
steady.
• Do not place any material on the product.
• Do not block or cover the ventilation
openings on the product
• The product must be plugged with a tension
source of 110-240 volts and 50~60 Hz
• Power cord and cables must be properly
routed and protected to prevent from
stepping on them
• Keep the power cord away from any heat
source. Possible fire hazard
Heating sources and humidity
• Keep the product dry and away from humidity
• Keep the product away from heat sources
Cleaning and maintenance
• Unplug the product before cleaning it. Do not
use solvents or liquids to clean the product
• Only clean the product with a soft and dry
fabric
• In case of troubleshooting, do not use spare
parts other than those suggested by the
manufacturer. Using inadequate spare parts
can lead to electric shocks, short-circuits fire
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPARATUS
TO RAIN OR MOISTURE
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER(OR BACK). REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL
or others incidents. Please contact a
technical authorized by SWEDX
Departure in holidays
• Unplug the product during lightning storms or
when unused for long periods of time
05

Chat with your Swedx SDS50K8-01 manual using AI

Get instant AI answers from your Swedx SDS50K8-01 manual

Ask anything about the Swedx SDS50K8-01. Answers come from this manual, with the pages they are based on.

SDS50K8-01 Maintenance Schedule

When unused for long periods
Remove remote control batteries

If the remote control is left unused for a long time, take the batteries out and store them in dry places.

Before cleaning
Unplug product before cleaning

Unplug the product before cleaning it. Do not use solvents or liquids to clean the product.

As needed
Clean with soft dry fabric

Only clean the product with a soft and dry fabric. Avoid subjecting the product to direct sunlit or other heat sources.

M: QW-35-FL

Ask a Question

0/1000

Do you recommend SDS50K8-01?

Yes No

Frequently Asked Questions

A

It is designed for digital signage and general display use, such as retail screens, lobbies, presentations, and scheduled content playback. Its features focus on reliable operation, multiple source support, and easy content management.

Is this answer helpful?

A

Yes. The HDMI inputs support up to 3840 x 2160 at 60 Hz on compatible ports, making it suitable for modern 4K devices and sharp playback when used with the right source and settings.

Is this answer helpful?

A

Yes. The built-in media player can play videos and images from USB flash drives or supported storage devices. It also supports playlist-style playback and auto play options for unattended operation.

Is this answer helpful?

A

The display supports several inputs, including HDMI, PC, AV, component, USB media player ports, and other professional connections depending on the series variant. This makes it flexible for different setups.

Is this answer helpful?

A

Yes, it is built for continuous signage-style use, but it should be installed with proper ventilation and used carefully. Static images should not stay on screen too long to help prevent image retention.

Is this answer helpful?

A

Yes. The time menu includes timer functions that allow scheduled on and off operation. This is useful for business hours, energy saving, and automated display routines.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Large 50-inch format works well for signage, presentations, and public viewing.
  • Multiple inputs support HDMI, PC, AV, component, and USB media playback.
  • Built-in timer and auto-sleep options help automate daily operation.
  • OSD controls make picture, sound, and system settings easy to adjust.
  • Media player supports direct USB playback without needing extra hardware.
VS

Disadvantages

  • Static images displayed too long may cause image retention or burn-in.
  • Some advanced functions depend on mode, source, or compatible accessories.
  • Best picture results may require careful setup of aspect ratio and scaling.
  • Cooling and wall-mount installation need proper placement and attention.
M: OA-GPT-54-NAN

Product Specification

Diagonal

50"/127 cm

Resolution

3840x2160, 16:9

Brightness

350 cd/m2

Contrast

4,000:1 (static), 100,000:1 (dynamic)

Response Time

9.5 ms

Viewing Angle

178°/178°

Shape

straight (flat)

Backlight

White-LED

HDR

N/A

Refresh Rate

120 Hz

Signal Frequency

not specified (horizontal), not specified (vertical)

Connections

1x VGA, 2x HDMI 2.0 (60 Hz@3840x2160), 1x HDMI 2.0 (36 Hz@3840x2160), 1x RCA Component

Further Connections

2x USB-A 2.0 (480 Mb/s)

VESA

200x200 (free)

Power Consumption

not specified (maximum), 110 W (typical), not specified (old energy label A+++ to G), 0.5 W (Standby)

Energy Efficiency Class SDR (A to G)

G

Energy Consumption SDR

132 kWh/1000 h

Dimensions (WxHxD)

43.94x25.16x1.22 in

Weight

36.38 lb

M: OA-GPT-54-NAN

Product Description

Swedx SDS50K8-01, 50-inch Digital Signage Display

The Swedx SDS50K8-01, 50-inch Manual reveals a display built for reliable everyday presentation work, whether it is used in retail, hospitality, reception areas, or internal communication spaces. Designed with digital signage in mind, this 50-inch screen focuses on flexibility, stable operation, and simple control rather than unnecessary complexity. It is a practical choice for users who want a large-format display that can handle both scheduled content and live source playback with ease.

One of the strongest points of this model is its broad connection support. With HDMI inputs, PC compatibility, AV and component options, plus built-in media player USB ports, the screen is ready for a wide range of playback scenarios. That makes it suitable for everything from promotional slides and video loops to PC-driven presentations. The 4K-capable HDMI support also helps deliver a sharp image when paired with modern sources, while picture settings such as contrast, brightness, color, and aspect ratio give users room to fine-tune the viewing experience.

The display also includes a useful on-screen menu system that makes routine adjustments straightforward. Users can manage picture and sound behavior, set timers, activate auto sleep, and configure settings like HDMI CEC, color range, and fan behavior. For businesses, the timing tools are especially valuable because they allow the screen to power on and off according to a schedule, reducing manual work and helping control energy use. The media player is another highlight, supporting USB-based playback for images and videos without requiring an external device.

From an installation and operation perspective, the product is designed with practical use in mind. Wall-mount support, remote control pairing, and clear input labeling make setup easier, while the built-in safety guidance emphasizes proper ventilation, stable placement, and protection from heat and moisture. The manual also highlights important care points such as avoiding still images for too long, which helps preserve screen quality over time.

Overall, the Swedx SDS50K8-01, 50-inch Manual points to a signage display that balances performance, usability, and versatility. It is a solid option for users who want a professional screen that can run continuously, accept multiple sources, and adapt to different content workflows without fuss.

Notes

  • Best suited for digital signage, looping media, and scheduled display use.
  • Use Point-to-Point or Just Scan for cleaner pixel mapping in HDMI modes.
  • Avoid static images for extended periods to reduce burn-in risk.
  • Proper ventilation and careful installation are important for long-term reliability.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly