Manual.ly Logo

SW-Stahl S3260 Manual

0.0 · 0 Ratings

PDF manual · 18 Pages

English

M: QW-35-FL
page

/ 18

Loading...
c2a977b4e16017008fc3c199dd0b49ee47c3 page 10
www.swstahl.de
SW-Stahl GmbH
An der Hasenjagd 3
D-42897 Remscheid
Tel. +49 (0) 2191 / 46438-0
Fax +49 (0) 2191 / 46438-40
BEDIEUNUNGSANLEITUNG / INSTRUCTION MANUAL
www.swstahl.de
SW-Stahl GmbH
An der Hasenjagd 3
D-42897 Remscheid
Tel. +49 (0) 2191 / 46438-0
Fax +49 (0) 2191 / 46438-40
BEDIEUNUNGSANLEITUNG / INSTRUCTION MANUAL
S3260
5. Remove the air cap from the tool air inlet and connect the
air supply hose to the tool. Set the air pressure at 90 PSI.
(See Figure 4)
6. Push forward the throttle lever lock and press down on
the throttle lever. How far the throttle lever is pressed
determines the tool rotation speed. Then the tool starts
to work. (See Figure 5)
WARNIINGS
CARE AND MAINTENANCE
The tool should be lubricated daily (or before each use) with
air tool oil (not included).
Air tool oil is available at major tool hardware stores.
SAE #10 weight oil or sewing machine
lubricant or any other high grade turbine oil
containing moisture absorbent, rust inhibitors, metal
wetting agents and an EP (extreme pressure)
additive may be used as a substitute. Do not use
detergent oil.
During continuous operation, the tool should be oiled
every 1 to 2 hours. This may be done using an in-line
oiler, or manually. If done manually, proceed as follows:
1.Disconnect the tool from air supply. (See Figure 6)
2.Place a few drops of air tool oil into the air inlet.
(See Figure 7)
Avoid the misuse of thicker oil which may lead to the
reduced performance or malfunction.
3. Connect the tool to the air supply. Run the tool without
load for a few seconds to distribute the oil through the tool.
Any excess oil may be propelled from the collet
area. So keep the tool away in a safe direction.
4. After operating the tool and before storing the tool,
disconnect the air hose and place 4 or 5 drops of air tool
oil into the air inlet, then re-connect the air hose and run
the tool to evenly distribute the oil throughout the tool for
30 seconds approximately. This will prolong the tool life.
5. Avoid storing the tool in a humid environment which
promotes rusting of internal mechanisms. Always oil the
tool before storage.

Chat with your SW-Stahl S3260 manual using AI

Get instant AI answers from your SW-Stahl S3260 manual

Ask anything about the SW-Stahl S3260. Answers come from this manual, with the pages they are based on.

S3260 Maintenance Schedule

Daily
Drain water from air compressor tank and lines

Drain water from the air compressor tank daily, as well as any condensation in the air lines to prevent damage to tool mechanisms.

Show in the manual (page 14)
Weekly
Clean the air inlet filter cartridge

Clean the air inlet filter cartridge weekly to ensure proper air supply and tool performance.

Show in the manual (page 14)
Before each use
Lubricate the tool with air tool oil

The tool should be lubricated daily or before each use with air tool oil. Place a few drops into the air inlet and run without load.

Show in the manual (page 16)
Every 1-2 hours
Re-oil during continuous operation

During continuous operation, the tool should be oiled every 1 to 2 hours using an in-line oiler or manually via the air inlet.

Show in the manual (page 16)
After use
Oil tool before storage

Disconnect air hose, place 4-5 drops of oil into the air inlet, reconnect, and run for approx. 30 seconds to distribute oil evenly.

Show in the manual (page 16)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend S3260?

Yes No

Frequently Asked Questions

A

The SW-Stahl S3260 operates at a free speed of 25,000 RPM, providing high efficiency for grinding and polishing tasks.

Is this answer helpful?

A

The net weight of the tool is 0.46 kg (1.01 lbs), making it lightweight and easy to handle for extended periods.

Is this answer helpful?

A

The tool requires a line pressure of 90 PSI (6.3 BAR) to function correctly and safely.

Is this answer helpful?

A

Yes, the product comes with a 360-day warranty against defects in materials and workmanship from the original purchase date.

Is this answer helpful?

A

You should lubricate the tool daily or before each use, and every 1 to 2 hours during continuous operation.

Is this answer helpful?

A

The S3260 accepts 1/4 inch (6 mm) shank accessories such as grinding stones and burrs.

Is this answer helpful?

A

No, it is not recommended to connect quick change couplings directly to the tool as vibration may cause failure; use a leader hose instead.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • High-speed operation reaching up to 25,000 RPM for efficient grinding
  • Lightweight design at 0.46 kg reduces user fatigue during long sessions
  • Generous 360-day warranty covers defects in materials and workmanship
  • Compatible with standard 1/4 inch accessories for versatile applications
  • Durable construction built by SW-Stahl GmbH for industrial reliability
VS

Disadvantages

  • Requires strict daily lubrication to prevent internal mechanism failure
  • Sensitive to water contamination requiring careful compressor maintenance
  • Must use specific air pressure of 90 PSI for optimal performance
  • No included lubricant means additional purchase cost for initial setup
  • Quick change couplings not recommended directly on tool due to vibration risks
M: QW-35-FL

Product Specification

Type

Grinder

Operating pressure

91.3 psi

Air consumption

4.45 cfm

No-load speed

22000 rpm

Tool holder

Collet (0.24 in)

Weight

1.32 lb

M: QW-35-FL

Product Description

SW-Stahl S3260 Air-powered Straight Grinder: Precision and Power

The SW-Stahl S3260 Air-powered Straight Grinder is a robust industrial tool designed for high-performance grinding, polishing, and deburring tasks. Manufactured by SW-Stahl GmbH in Remscheid, Germany, this air die grinder delivers exceptional speed and control, making it a favorite among professionals who demand reliability in their daily operations.

Unmatched Performance

At the heart of the S3260 is its powerful air motor capable of reaching a free speed of 25,000 RPM. This high rotational velocity allows users to tackle tough materials with ease, ensuring smooth finishes and efficient material removal. The tool features a 1/4 inch (6 mm) capacity, accommodating a wide range of grinding accessories. Weighing only 0.46 kg, it offers excellent maneuverability without sacrificing power, reducing operator fatigue during extended use.

Safety and Durability

Safety is paramount when operating pneumatic tools. The S3260 comes with clear warnings regarding air pressure, hose management, and personal protective equipment. Users must maintain an air pressure of 90 PSI and ensure proper lubrication to prevent internal damage. The manual emphasizes the importance of draining water from compressors daily to avoid moisture entering the tool mechanisms. With a 360-day warranty covering defects in materials and workmanship, this grinder stands as a testament to quality engineering.

Maintenance Matters

To prolong the lifespan of your S3260, regular maintenance is essential. Daily lubrication with air tool oil or suitable substitutes like SAE #10 weight oil keeps internal components running smoothly. Operators should check hoses for wear and replace warning labels if they become obscured. Proper care ensures that the tool remains a safe and effective asset in any workshop environment.

Important Notes

  • Always disconnect air supply before performing maintenance.
  • Use only accessories rated for speeds equal to or greater than 25,000 RPM.
  • Store the tool in a dry environment after applying oil to prevent rust.
M: QW-35-FL

© Copyright 2026 Manual.ly