Manual.ly Logo

SW-Stahl S3260 Manual

0.0 · 0 Ratings

PDF manual · 18 Pages

English

M: QW-35-FL
page

/ 18

Loading...
c2a977b4e16017008fc3c199dd0b49ee47c3 page a
www.swstahl.de
SW-Stahl GmbH
An der Hasenjagd 3
D-42897 Remscheid
Tel. +49 (0) 2191 / 46438-0
Fax +49 (0) 2191 / 46438-40
BEDIEUNUNGSANLEITUNG / INSTRUCTION MANUAL
www.swstahl.de
SW-Stahl GmbH
An der Hasenjagd 3
D-42897 Remscheid
Tel. +49 (0) 2191 / 46438-0
Fax +49 (0) 2191 / 46438-40
BEDIEUNUNGSANLEITUNG / INSTRUCTION MANUAL
S3260
!
WARRANTY AND SERVICE
Please read and understand this entire manual before attempting to assemble,
operate or install the product. If you have any questions regarding the product,
please contact the distributor or sales agent.
We (the manufacturers) warrant all products we sell to be free from defects in
materials and workmanship for a period of 360 days from the original purchase date.
This warranty does not apply to effects due directly or indirectly to abuse, misuse,
negligence, normal wear and tear down or improper maintenance, nor shall it apply
to any product that has been repaired or altered outside of our facilities. Should any
product fail to provide satisfactory service, call your distributor for return
authorization but to be accompanied with proof of purchase and an explanation for
the return.
We make no other warranty, expressed and/or implied. We shall in no event be liable
for death, injuries to persons or property, or for incidental, consequential, indirect or
special damages of any nature arising from the sale or use of the products,
excepting only the cost or expense of repair and replacement as described above.
This warranty gives the customer specific legal lights. Other legal rights may vary
from state to state.
WHO IS COVERED?
This warranty covers only the initial purchaser of the product.
HOW TO GET SERVICE
The product or part must be returned to the distributor or sales agent for
examination. You must provide proof of initial purchase date and an explanation of
the complaint must accompany the merchandise. If our inspection discloses a
defect, we will repair or replace the product, or refund the purchase price, at our
option. We will return the repaired product or replacement at our expense unless it
is determined by us that there is no defect, or that the defect resulted from causes
not within the scope of our warranty in which case we will, at your direction, dispose
of or return the product. In the event you choose to have the product returned, you
will be responsible for the shipping and handling costs for the return.
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble,
operate or install the product. If you have any questions regarding the product,
please contact the distributor or sales agent.
WARNINGS!
IMPROPER OPERATION OR MAINTENANCE OF THIS PRODUCT COULD
RESULT IN SERIOUS INJURY AND PROPERTY DAMAGE. READ AND UNDERSTAND ALL
WARNINGS AND OPERATION INSTRUCTIONS BEFORE USING THIS EQUIPMENT. WHEN
USING AIR TOOLS, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED
TO REDUCE THE RISK
OF PERSONAL INJURY

Chat with your SW-Stahl S3260 manual using AI

Get instant AI answers from your SW-Stahl S3260 manual

Ask anything about the SW-Stahl S3260. Answers come from this manual, with the pages they are based on.

S3260 Maintenance Schedule

Daily
Drain water from air compressor tank and lines

Drain water from the air compressor tank daily, as well as any condensation in the air lines to prevent damage to tool mechanisms.

Show in the manual (page 14)
Weekly
Clean the air inlet filter cartridge

Clean the air inlet filter cartridge weekly to ensure proper air supply and tool performance.

Show in the manual (page 14)
Before each use
Lubricate the tool with air tool oil

The tool should be lubricated daily or before each use with air tool oil. Place a few drops into the air inlet and run without load.

Show in the manual (page 16)
Every 1-2 hours
Re-oil during continuous operation

During continuous operation, the tool should be oiled every 1 to 2 hours using an in-line oiler or manually via the air inlet.

Show in the manual (page 16)
After use
Oil tool before storage

Disconnect air hose, place 4-5 drops of oil into the air inlet, reconnect, and run for approx. 30 seconds to distribute oil evenly.

Show in the manual (page 16)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend S3260?

Yes No

Frequently Asked Questions

A

The SW-Stahl S3260 operates at a free speed of 25,000 RPM, providing high efficiency for grinding and polishing tasks.

Is this answer helpful?

A

The net weight of the tool is 0.46 kg (1.01 lbs), making it lightweight and easy to handle for extended periods.

Is this answer helpful?

A

The tool requires a line pressure of 90 PSI (6.3 BAR) to function correctly and safely.

Is this answer helpful?

A

Yes, the product comes with a 360-day warranty against defects in materials and workmanship from the original purchase date.

Is this answer helpful?

A

You should lubricate the tool daily or before each use, and every 1 to 2 hours during continuous operation.

Is this answer helpful?

A

The S3260 accepts 1/4 inch (6 mm) shank accessories such as grinding stones and burrs.

Is this answer helpful?

A

No, it is not recommended to connect quick change couplings directly to the tool as vibration may cause failure; use a leader hose instead.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • High-speed operation reaching up to 25,000 RPM for efficient grinding
  • Lightweight design at 0.46 kg reduces user fatigue during long sessions
  • Generous 360-day warranty covers defects in materials and workmanship
  • Compatible with standard 1/4 inch accessories for versatile applications
  • Durable construction built by SW-Stahl GmbH for industrial reliability
VS

Disadvantages

  • Requires strict daily lubrication to prevent internal mechanism failure
  • Sensitive to water contamination requiring careful compressor maintenance
  • Must use specific air pressure of 90 PSI for optimal performance
  • No included lubricant means additional purchase cost for initial setup
  • Quick change couplings not recommended directly on tool due to vibration risks
M: QW-35-FL

Product Specification

Type

Grinder

Operating pressure

91.3 psi

Air consumption

4.45 cfm

No-load speed

22000 rpm

Tool holder

Collet (0.24 in)

Weight

1.32 lb

M: QW-35-FL

Product Description

SW-Stahl S3260 Air-powered Straight Grinder: Precision and Power

The SW-Stahl S3260 Air-powered Straight Grinder is a robust industrial tool designed for high-performance grinding, polishing, and deburring tasks. Manufactured by SW-Stahl GmbH in Remscheid, Germany, this air die grinder delivers exceptional speed and control, making it a favorite among professionals who demand reliability in their daily operations.

Unmatched Performance

At the heart of the S3260 is its powerful air motor capable of reaching a free speed of 25,000 RPM. This high rotational velocity allows users to tackle tough materials with ease, ensuring smooth finishes and efficient material removal. The tool features a 1/4 inch (6 mm) capacity, accommodating a wide range of grinding accessories. Weighing only 0.46 kg, it offers excellent maneuverability without sacrificing power, reducing operator fatigue during extended use.

Safety and Durability

Safety is paramount when operating pneumatic tools. The S3260 comes with clear warnings regarding air pressure, hose management, and personal protective equipment. Users must maintain an air pressure of 90 PSI and ensure proper lubrication to prevent internal damage. The manual emphasizes the importance of draining water from compressors daily to avoid moisture entering the tool mechanisms. With a 360-day warranty covering defects in materials and workmanship, this grinder stands as a testament to quality engineering.

Maintenance Matters

To prolong the lifespan of your S3260, regular maintenance is essential. Daily lubrication with air tool oil or suitable substitutes like SAE #10 weight oil keeps internal components running smoothly. Operators should check hoses for wear and replace warning labels if they become obscured. Proper care ensures that the tool remains a safe and effective asset in any workshop environment.

Important Notes

  • Always disconnect air supply before performing maintenance.
  • Use only accessories rated for speeds equal to or greater than 25,000 RPM.
  • Store the tool in a dry environment after applying oil to prevent rust.
M: QW-35-FL

© Copyright 2026 Manual.ly