Manual.ly Logo

Supermicro SuperWorkstation 7049GP-TRT Manual

0.0 · 0 Ratings

PDF manual · 133 Pages

English

M: OA-GPT-54-NAN
page

/ 133

Loading...
4b931c6623a9386c994d998c468ead1bc773 page 1f
31
Chapter 3: Maintenance and Component Installation
System Cooling
Heavy-duty fans provide cooling for the chassis. Four fans are located in the mid-section of
the chassis, two fans are located in the rear, and two optional fans can be mounted on the
external rear of the chassis, required for passive GPUs.
The internal fans come pre-installed to the chassis. Each fan is hot-swappable and can be
replaced without removing any connections.
System Fan Failure
Fan speed is controlled by system temperature through IPMI. If a fan fails, the remaining
fans will ramp up to full speed. Replace any failed fan at your earliest convenience with the
same type and model (the system can continue to run with a failed fan).
Replacing System Fans
The chassis contains two types of system fans: mid-system fans and rear system fans.
Replacing Mid-System Fans (FAN-0114L4 and FAN-0138L4)
1. Determine which fan has failed. Because the fans are hot-swappable, the system does
not need to be powered-down.
2. Press the fan release tab and lift the failed fan from the chassis. Mid fans must be
pulled straight out of the chassis. Part numbers: top two fans are FAN-0114L4 and
bottom two are FAN-0138L4.
3. Place the new fan into the vacant space in the housing while making sure the arrows
on the top of the fan (indicating air direction) point in the same direction as the arrows
on the other fans. As soon as the fan is connected, it will begin working.
Replacing the Rear System Fan (FAN-0082L4)
1. Determine which fan has failed.
2. Press the rear fan release tab.
3. 
4. 
5. Push the fan fully into the housing until the fan clicks into place. Power up the system
and check that the fan is working properly before replacing the chassis cover.

Chat with your Supermicro SuperWorkstation 7049GP-TRT manual using AI

Get instant AI answers from your Supermicro SuperWorkstation 7049GP-TRT manual

Ask anything about the Supermicro SuperWorkstation 7049GP-TRT. Answers come from this manual, with the pages they are based on.

SuperWorkstation 7049GP-TRT Maintenance Schedule

Remind me when maintenance is due
Monthly
Inspect system fans for failure

Check fan status via LED indicators or IPMI. Replace any failed fan immediately with the same model.

Show in the manual (page 31)
Semiannual
Clean dust from chassis and components

Ensure the system is in a clean, dust-free area. Remove dust to prevent overheating and component damage.

Show in the manual (page 17)
Yearly
Replace motherboard battery

Replace the CR2032 battery only when necessary to retain system information. Handle used batteries carefully.

Show in the manual (page 29)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend SuperWorkstation 7049GP-TRT?

Yes No

Frequently Asked Questions

A

It is best suited for GPU-accelerated computing, professional rendering, simulation, scientific workloads, and other tasks that benefit from strong CPU, memory, and expansion capacity.

Is this answer helpful?

A

The platform supports up to 2TB of DDR4 ECC memory using 16 DIMM slots, including RDIMM, LRDIMM, 3DS LRDIMM, and NV-DIMM options.

Is this answer helpful?

A

Yes. The chassis and motherboard provide extensive PCIe expansion, making it suitable for multi-GPU configurations and other high-bandwidth add-in cards.

Is this answer helpful?

A

It includes eight hot-swap 3.5-inch drive bays and also supports SATA and NVMe-related connections depending on the installed configuration.

Is this answer helpful?

A

Yes. The system supports IPMI and includes a dedicated IPMI LAN port, which helps administrators monitor and manage the workstation remotely.

Is this answer helpful?

A

The system is intended for professional integrators and experienced technicians. The hardware layout and safety requirements make careful handling important.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Dual-socket Xeon support delivers strong multi-threaded performance for demanding workloads.
  • Up to 2TB DDR4 ECC memory helps with large datasets and memory-heavy applications.
  • Eight hot-swap drive bays improve storage flexibility and maintenance convenience.
  • Redundant 2200W power supply adds resilience for continuous operation.
  • IPMI and SuperDoctor 5 support remote monitoring and system management.
VS

Disadvantages

  • 4U chassis is large and better suited to rack or equipment-room deployment.
  • Installation and maintenance are recommended for experienced technicians only.
  • High-power hardware and GPU focus may increase cooling and power demands.
  • Advanced BIOS and hardware options can be complex for casual users.
M: OA-GPT-54-NAN

Product Specification

Type

Tower

Chipset

Intel C621

Socket

2x Intel 3647 (spread Layout)

CPU

no

RAM

16x DDR3, hexa PC4-21300L/DDR4-2666, max. N/A (UDIMM), 512GB (RDIMM), 1TB (LRDIMM), 2TB (LRDIMM-3DS)

Storage

10x SATA 6Gb/s, 1x M.2/M-Key (PCIe 3.0 x4, 22110)

External bays

3x 5.25", 8x 3.5" (Hot-Swap)

Internal bays

N/A

Graphics

ASPEED AST2500 - Onboard

GPU ports

1x VGA

Rear ports

2x USB-A 3.0 (5Gb/s), 2x USB-A 2.0 (480Mb/s), 2x RJ-45 10Gb LAN (Intel X550), 1x serial, 1x Management port (RJ-45), 1x AC-In (Power connector)

Expansion slots

2x PCIe 3.0 x16, 1x PCIe 3.0 x8 (x4)

Wireless

N/A

Card reader

N/A

Power supply

internal, 1x AC-In (2000W), redundant

VESA mount

N/A

Dimensions (WxHxD)

7.01x18.19x26.50in

Volume

14.61gal

Special features

IPMI 2.0

USB notation

Link

M: OA-GPT-54-NAN

Product Description

Supermicro GPU SuperWorkstation 7049GP-TRT: A Workstation Built for Heavy Lifting

The Supermicro GPU SuperWorkstation 7049GP-TRT is designed for users who need serious compute density, dependable cooling, and flexible expansion in one 4U platform. Built around the X11DPG-QT motherboard and the SC-747BTS-R2K20BP chassis, it brings together dual-socket Intel Xeon Scalable processor support, enterprise memory capacity, and workstation-class graphics readiness in a single enclosure.

At its core, this system is made for demanding tasks such as GPU-accelerated workloads, content creation, simulation, and advanced data processing. With support for up to 2TB of DDR4 ECC memory across 16 slots, it offers the headroom needed for memory-intensive jobs. The platform also includes extensive PCI Express expansion, making it a strong fit for multi-GPU builds and specialized add-in cards.

Storage and serviceability are also clear priorities. Eight hot-swap 3.5-inch drive bays provide easy access for drive replacement and expansion, while the chassis layout is built to support practical maintenance. The redundant 2200W power supply adds resilience, and the cooling design includes multiple chassis fans plus support for additional rear fans when passive GPUs are used. That combination helps keep performance stable under sustained load.

For system administrators, the management tools are a major advantage. Integrated IPMI support, a dedicated management LAN port, and SuperDoctor 5 monitoring make remote oversight much easier. UEFI BIOS options further extend control over boot behavior, CPU tuning, power handling, and memory settings, which is useful when fine-tuning the machine for production environments.

The Supermicro GPU SuperWorkstation 7049GP-TRT Manual reflects a platform that expects careful installation and experienced handling. It emphasizes proper ESD precautions, correct CPU and heatsink assembly, and responsible maintenance practices. That makes the system especially appealing to professional integrators who value performance, reliability, and structured service procedures.

Why it stands out

This workstation is not trying to be small or simple. It is built to be expandable, serviceable, and ready for serious workloads where uptime matters. If your project needs dense PCIe options, large memory capacity, redundant power, and enterprise-grade control, this model delivers a compelling foundation.

Notes

  • Best suited for professional deployment and experienced technicians.
  • Strong fit for GPU-heavy computing and advanced workstation tasks.
  • Remote management and monitoring features add real operational value.
  • Keyword focus: Supermicro GPU SuperWorkstation 7049GP-TRT Manual.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly