Manual.ly Logo

StarTech ET91000SM20 Manual

0.0 · 0 Ratings

PDF manual · 12 Pages

English

M: OA-GPT-5-NAN
page

/ 12

Loading...
216d7f8bbd682fab6aa129a0dbca8b631b31 page 1
Manual Revision: 06/17/2016
For the latest information, technical specications, and support for
this product, please visit www.startech.com/ET91000SM20.
FR: Guide de l’utilisateur - fr.startech.com
DE: Bedienungsanleitung - de.startech.com
ES: Guía del usuario - es.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
IT: Guida per l’uso - it.startech.com
ET91000SM20
Gigabit Ethernet Fiber Media Converter -
SM LC - 20km
*actual product may vary from photos

Chat with your StarTech ET91000SM20 manual using AI

Get instant AI answers from your StarTech ET91000SM20 manual

Ask anything about the StarTech ET91000SM20. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend ET91000SM20?

Yes No

Frequently Asked Questions

A

The ET91000SM20 provides a Gigabit RJ45 (1000Base-T) copper port and a pre-installed 1000Base-LX SFP transceiver with LC-duplex single-mode fiber connectors for up to 20 km links.

Is this answer helpful?

A

No. The ET91000SM20 supports Gigabit (1000 Mbps) copper and fiber only. It will not operate with 10/100 Mbps copper devices or 10/100 Mbps SFP transceivers.

Is this answer helpful?

A

Enable LFP by setting DIP switch 3 to the ON (downward) position. When enabled, a loss of link on one interface will cause the converter to drop the link on the opposite interface to aid network diagnostics.

Is this answer helpful?

A

Verify correct TX/RX pairing on LC duplex connectors, ensure both ends use Gigabit-capable equipment, match duplex/forced or auto settings via DIP switches, and confirm SFP compatibility and clean connectors to avoid signal degradation.

Is this answer helpful?

A

Yes. The pre-installed 1000Base-LX SFP module is removable and can be replaced with any MSA-compliant Gigabit SFP transceiver. Do not use 10/100 SFP modules.

Is this answer helpful?

A

Always assume fiber is live; never look into fiber connectors. Follow ESD precautions and handle transceivers and fiber components carefully to avoid contamination, dust, and damage that can impair performance.

Is this answer helpful?

A

StarTech provides a two-year limited warranty against defects in materials and workmanship, plus lifetime technical support through their support portal for documentation, downloads, and assistance.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Extends Gigabit networks over single-mode fiber up to 20 km using pre-installed 1310 nm SFP.
  • Transparent media conversion with support for MSA-compliant Gigabit SFP modules for flexible upgrades.
  • Simple setup with RJ45 and LC-duplex ports, DIP switches for duplex/force/LFP configuration, and clear LEDs.
  • Includes universal power adapter and grounding screw; StarTech lifetime technical support and two-year warranty.
  • Compact footprint suitable for integrating copper-based equipment into long-distance fiber links.
VS

Disadvantages

  • Does not support 10/100 Mbps copper or fiber devices or SFP modules—Gigabit only.
  • Pre-installed SFP transceiver uses 1310 nm single-mode only; may require replacement for other wavelengths or distances.
  • Short fiber runs may need an optical attenuator to prevent receiver damage from strong optical signals.
  • DIP switch configuration needed to match connected equipment; misconfiguration can prevent link establishment.
  • Class A device intended for commercial use; operation in residential areas may cause interference that the user must correct.
M: OA-GPT-5-NAN

Product Specification

Type

LAN Converter

Form factor

1x external wired, Standalone

Interface

N/A

Ports

1x RJ-45, 1x LC-Duplex (1Gb/s)

Transfer rate

1x RJ-45 (1000Base-T), 1x LC-Duplex (1000Base-LX 1310nm SM 12.43mi)

Power supply

Power not via connection, mains connection (1x barrel connector 12V/1.6A), external power supply required and included (1x barrel connector)

Dimensions

3.46x0.91x6.42in (WxHxD)

Weight

0.91 lb

Compatibility

universal

Features

Metal housing, external power supply, 9.6kB Jumbo frames

Manufacturer's warranty

two years

M: OA-GPT-54-NAN

Product Description

StarTech ET91000SM20, RJ-45, LC-Duplex SM, 20km Manual

The StarTech ET91000SM20 is a Gigabit Ethernet fiber media converter designed to bridge copper and single-mode fiber networks up to 20 km. Featuring an RJ-45 Gigabit (1000Base-T) copper port and a pre-installed 1000Base-LX SFP transceiver (1310 nm) with LC-duplex connectors, this compact converter enables transparent, high-speed data transfer between copper switches and fiber infrastructure. The unit includes a universal power adapter, grounding screw, and supports MSA-compliant Gigabit SFP modules for flexible deployment.

This device is built for environments that require reliable long-distance connectivity without replacing existing copper equipment. Its integrated SFP transceiver transmits over single-mode fiber to extend networks to 20 km (12.4 mi). The media converter supports 1.25 Gbps SFP modules (Gigabit only) and will not operate with 10/100 Mbps modules. It also provides a DIP switch panel for straightforward configuration of duplex, forced/auto negotiation, and Link Fault Pass-Through (LFP).

Practical setup is simple: connect the LC duplex fiber to the SFP module, connect a Cat5e (or better) cable to the RJ45 port, select the appropriate DIP switch settings, and power the unit with the included adapter. LED indicators report power, link status on both fiber and copper sides, full-duplex state, remote power fail, and LFP status, helping technicians quickly verify operation during installation and troubleshooting. The converter accepts different region power clips and includes ESD and fiber handling cautions to protect transceivers and personnel.

Key operational notes include ensuring both ends of the fiber pair are correctly cross-connected (TX to RX, RX to TX), matching duplex and forced/auto settings between connected devices, and using an optical attenuator if a very short fiber run produces excessive optical power. The RJ45 port strictly requires Gigabit-capable network devices and cables; 10/100 copper devices are not supported.

The ET91000SM20 is FCC and Industry Canada compliant for Class A digital devices in commercial environments. StarTech backs the product with a two-year warranty and lifetime technical support resources, including downloads and documentation on the StarTech website.

Notes

  • Never look into active fiber connectors; laser/infrared light may cause eye injury.
  • Use MSA-compliant Gigabit SFPs only; do not use 10/100 SFP modules.
  • Default LFP is OFF; enable LFP via DIP switch 3 for automatic link fault propagation.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly