Manual.ly Logo

StarTech Adjustable 1U Server Rack Shelf Manual

0.0 · 0 Ratings

PDF manual · 2 Pages

English

M: OA-GPT-5-NAN
page

/ 2

Loading...
30a94e9dadaf6eb45d40421b92fb1a94b7ec page 1
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: February 24, 2023 2:03 PM
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Product Diagram
ADJSHELFHD/ADJSHELFHD2/ADJSHELFHDV/ADJSHELFHDV2
Component Function
1 Shelf Surface
• Mount the server rack equipment
• The 1U Shelf Body is 27.5in (700mm) deep, not
including the adjustable mounting brackets
2 Ventilation Holes
• Promote air ow for the mounted equipment.
• Only applicable to ADJSHELFHDV /
ADJSHELFHDV2
3 Front Mounting Brackets
• Fasten Shelf to the Front Posts of the rack or
cabinet
• Holes on the sides of the Mounting Brackets allow
for Depth Adjustment. M6x12 mm Panel Screws
(x 4)secure the Mounting Brackets to the desired
depth
4 Rear Mounting Brackets
• Fasten Shelf to the Rear Posts of the rack or cabinet
• Holes on the sides of the Mounting Brackets allow
for Depth Adjustment. M6x12 mm Panel Screws
(x 4)secure the Mounting Brackets to the desired
depth
1U 4-Post Adjustable Mounting Depth Heavy Duty Shelf - 27.5in/700mm Depth
Package Contents
• 1U Shelf Body x 1
• Front Mounting Brackets x 2
• Rear Mounting Brackets x 2
• M6x12 mm Screws x 8
• M6 Cage Nuts x 8 (Only included with Revision 2 or higher)
• M6 Plastic Washers x 8
• Quick-Start Guide x 1
Requirements
For the latest manuals, product information, technical specications, and declarations
of conformance, please visit:
www.StarTech.com/ADJSHELFHD
www.StarTech.com/ADJSHELFHD2
www.StarTech.com/ADJSHELFHDV
www.StarTech.com/ADJSHELFHDV2
• For square cage holes, M6 cage nuts are included. For M6 threaded holes, no cage
nuts are needed. Refer to the manufacturer of the rack to determine the mounting
hole type
• Phillips head screwdriver
• Cage nut tool (Optional)
Warnings!
Read the entire Quick-Start Guide and ensure the instructions are fully understood
before assembling and using this product.
Before adding equipment to this product, ensure this product has been properly
mounted.
Never operate this product if parts are missing or damaged.
Ensure the weight of the equipment does not exceed the weight capacity of this
product. If the weight capacity is exceeded, personal injury or damage to the
equipment is possible. This product can support the following weight:
ADJSHELFHD: Rev 01 - up to 175lbs / 80kg; Rev 02 or above - up to 330lbs / 150kg.
ADJSHELFHDV: Rev 01 - up to 250lbs / 113kg; Rev 02 or above - up to 330lbs / 150kg.
ADJSHELFHD2: up to 330lbs / 150kg.
ADJSHELFHDV2: up to 330lbs / 150kg.
The maximum supported weight is only possible when all four mounting brackets are
properly mounted to all posts on a four post rack.
Arrange your equipment in the rack in descending order of weight. The lightest
equipment is installed at the top of the rack, and the heaviest is on the bottom.
*Product may vary from image
3
1
4
2

Chat with your StarTech Adjustable 1U Server Rack Shelf manual using AI

Get instant AI answers from your StarTech Adjustable 1U Server Rack Shelf manual

Ask anything about the StarTech Adjustable 1U Server Rack Shelf. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend Adjustable 1U Server Rack Shelf?

Yes No

Frequently Asked Questions

A

Supported weight varies by model and revision. Rev 02 and above for many models support up to 150kg (330 lbs). Some earlier revisions have lower ratings (e.g., 80kg or 113kg). Maximum capacity requires all four mounting brackets installed on a four-post rack.

Is this answer helpful?

A

The adjustable mounting depth ranges from 19.5 inches (495 mm) to 38.3 inches (974 mm), allowing the shelf to fit a broad range of standard four-post rack depths by sliding the front and rear mounting brackets to match the rack posts.

Is this answer helpful?

A

Yes, the package includes the 1U shelf body, front and rear mounting brackets, M6x12 mm screws, plastic washers, and, for Revision 2 or higher, M6 cage nuts. A Phillips-head screwdriver is needed for installation; a cage nut tool is optional for installing cage nuts.

Is this answer helpful?

A

Yes—models in the ADJSHELFHDV series include ventilation holes to promote airflow through the shelf surface, which helps when mounting equipment that generates heat. Non-ventilated versions are also available for different use cases.

Is this answer helpful?

A

Read the manual fully, ensure the shelf is properly mounted before adding equipment, do not operate with missing or damaged parts, and do not exceed the stated weight capacity. Install heavier equipment lower in the rack and use all four mounting points for maximum stability.

Is this answer helpful?

A

If your rack has square cage holes, M6 cage nuts are required; Revision 2 packages include them. If your rack posts have M6 threaded holes, cage nuts are not needed. Verify your rack’s hole type before installation.

Is this answer helpful?

A

StarTech provides a lifetime warranty for this product. For full warranty terms, including any regional differences or conditions, refer to StarTech’s official warranty page and documentation.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • High load capacity (up to 150kg / 330 lbs on supported revisions) when mounted on four-post racks
  • Adjustable mounting depth from 19.5in (495 mm) to 38.3in (974 mm) to fit many rack sizes
  • Included mounting hardware (screws, washers, and cage nuts for certain revisions) simplifies installation
  • Ventilated variant available to improve airflow and cooling for mounted equipment
  • Backed by StarTech lifetime warranty and extensive online support resources
VS

Disadvantages

  • Maximum load requires all four mounting brackets properly installed on a four-post rack
  • Older revisions have lower weight ratings; check revision before purchase
  • Shelf occupies 1U of rack space which might limit vertical space for other equipment
  • Some racks require a cage nut tool for installation if using square holes
  • Non-ventilated model may not suit high-heat equipment without additional cooling
M: OA-GPT-5-NAN

Product Specification

Type

Shelf

Rack units

1U

Mounting depth

19.49-38.35in

Load capacity

330.69lbs

Color

black

Dimensions

27.56x19.02x1.73in

Weight

13.67lbs

M: OA-GPT-54-NAN

Product Description

StarTech Adjustable Server Rack Shelf up to 150kg, 1U Manual

The StarTech Adjustable Server Rack Shelf up to 150kg, 1U Manual introduces a heavy-duty, adjustable 1U shelf designed for four-post server racks and cabinets. Engineered for reliability, the shelf body measures 27.5in (700mm) deep and supports up to 150kg (330 lbs) in supported revisions when all four mounting brackets are properly installed. It’s ideal for mounting servers, switches, storage devices, and other IT equipment that require a sturdy, flat surface rather than front-rail mounting.

The shelf includes front and rear adjustable mounting brackets that slide to fit mounting depths from 19.5in (495 mm) to 38.3in (974 mm), accommodating a wide variety of rack sizes. The package contains the 1U shelf body, two front and two rear mounting brackets, M6x12mm screws, plastic washers, and — for certain revisions — M6 cage nuts. Ventilated variants (ADJSHELFHDV series) feature airflow holes to aid cooling for installed equipment.

Installation is straightforward and hardware-focused: align the shelf to the chosen U height on the rack, adjust bracket depth to match the rack posts, secure panel screws, and fasten with M6 screws and washers. For racks with square cage holes, included cage nuts can be installed to accept the M6 screws. A Phillips-head screwdriver is required; a cage nut tool is optional but helpful.

Safety and load guidance are emphasized. The manual warns to confirm correct mounting before adding equipment and not to exceed the specified weight capacity. Different revisions and models have distinct load ratings: early revisions support lower weights while Rev 02 and later commonly reach the 150kg (330 lb) rating. Maximum support requires all four brackets mounted to four-post racks. StarTech backs the shelf with a lifetime warranty and provides detailed technical resources and downloads on its support site.

This shelf blends rugged construction with flexible depth adjustment and ventilation options, making it a practical choice for data centers, server rooms, and SMB IT closets where equipment must sit securely on a shelf rather than be rack-mounted by rails. With clear mounting instructions and included hardware, it reduces installation friction and supports safe load distribution within a standard 1U space.

Notes:

  • Verify your rack’s hole type (square vs threaded) before installation to determine if cage nuts are needed.
  • Arrange rack equipment with heavier items lower to maintain stability.
  • Ensure all four mounting brackets are used for maximum rated capacity.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly