Manual.ly Logo

Sportstech STX300 Manual

0.0 · 0 Ratings

PDF manual · 77 Pages

English

M: OA-GPT-5-NAN
page

/ 77

Loading...
872491bd29eb6919e7ad2d17a784820520a7 page f
15
8. WARTUNG, PFLEGE UND REINIGUNG
HINWEIS: Bitte nutzen Sie zum Reinigen unseres Steppers keine aggressiven und ätzenden Reinigungs- oder
Lösungsmittel. Auch keine Scheuermittel. Achten Sie auch darauf, dass niemals Feuchtigkeit in den Computer eindringt.
1. Bitte sorgen Sie dafür, dass mindestens 1x die Woche unser Stepper mit einem weichen, angefeuchteten Tuch
gereinigt wird.
2. Sollten Sie quietschende Geräusche bemerken, ölen Sie unseren Stepper bzw. die beweglichen Teile und Axial-
Verbindungen ein.
3. Bevor Sie unser Gerät verwenden, überprüfen Sie bitte vor jeder Übung, ob es Beschädigungen oder
Verschleisserscheinungen gibt. Bitte prüfen Sie besonders die Kunststoff-Scheiben in den Achsen des Gestänges,
die Tritt-Bereiche und Zug-Bänder bzw. Band-Befestigungen auf einwandfreie Funktion. Wenn hier Teile defekt sein
sollten, oder gewechselt werden müssen, dürfen Sie unser Gerät nicht mehr verwenden.
4. Achtung: Teile aus Kunststoff und Zug-Bänder verschleißen nach einer gewissen Zeit. Achten Sie deshalb auf sie.
9. BATTERIE AUSTAUSCHEN
Sollten Sie feststellen, dass die Anzeige im Display immer schwächer wird, muss die Batterie ausgewechselt werden.
Verwenden Sie bitte eine LR44-Batterie.
1. Bitte lösen Sie den Computer vorsichtig aus seiner Verankerung, und drehen ihn um.
2. Entnehmen Sie nun sorgfältig die Batterie.
3. Ersetzen Sie die alte Batterie durch eine neue. Beachten Sie dabei die unterschiedlichen Pole.
4. Bauen Sie den Computer wieder in unseren Stepper ein.
10. HILFE BEI PROBLEMEN
Keine Display-Anzeige
Starke Geräuschentwicklung
während der Nutzung
Batterie ist leer ode fehlt
Verbindungskabel ist eingeklemmt
oder beschädigt
Lose Steckverbindung
Elektronk ist beschädigt
Lose Schrauben
Mangelnde Schmierung
Batterie ersetzen
Verbindungskabel ersetzen
Stecker korrekt verbinden
Trainingscomputer austauschen
Schrauben festziehen
Alle beweglichen Teile schmieren
PROBLEM MÖGLICHE URSACHEN LÖSUNGEN

Chat with your Sportstech STX300 manual using AI

Get instant AI answers from your Sportstech STX300 manual

Ask anything about the Sportstech STX300. Answers come from this manual, with the pages they are based on.

STX300 Maintenance Schedule

Weekly
Clean the stepper

Clean the stepper with a soft damp cloth at least once a week. Do not use aggressive or corrosive cleaning agents.

Show in the manual (page 15)
As needed
Lubricate moving parts

If squeaking noises are heard, lubricate the stepper, moving parts, and axial connections.

Show in the manual (page 15)
Before each exercise
Inspect for damage

Check before each exercise for damage or wear, especially plastic washers, tread areas, and pull straps.

Show in the manual (page 15)
Periodically
Check screws and nuts

Periodically check whether screws and nuts are still tight to ensure secure standing.

When display fades
Replace battery

Replace the LR44 battery if the display information becomes faint.

Show in the manual (page 15)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend STX300?

Yes No

Frequently Asked Questions

A

The stepper is designed for a maximum user weight of 120 kg. Exceeding this limit may compromise safety and device performance.

Is this answer helpful?

A

Use the bottom-mounted adjusting screw to increase resistance and step height. Turn the screw clockwise to raise resistance; adjust gradually to find a comfortable intensity.

Is this answer helpful?

A

Yes — attach the provided pull straps to the designated eyelets and perform guided strap exercises. With straps you can work arms, shoulders, chest and back, while stepping or stationary. Keep handles horizontal and avoid overstressing wrists.

Is this answer helpful?

A

The display shows mode (STOP/CNT), elapsed TIME, STRIDES/MIN, CAL (calories) and SCAN mode cycles data every 4 seconds. The device conforms to accuracy Class C, so readouts are estimates and not clinically precise.

Is this answer helpful?

A

Wipe the stepper weekly with a soft damp cloth, avoid aggressive cleaners or solvents, lubricate moving parts if squeaks occur, and inspect screws, pedals, plastic washers and straps regularly. Remove the battery if storing long-term.

Is this answer helpful?

A

The computer uses an LR44 battery. Carefully detach the computer, turn it over, remove the old battery and install a new one observing polarity. Reinstall the computer—TTR total step count resets only when battery is replaced.

Is this answer helpful?

A

Yes. Allow about 2 x 2 meters clearance, place the unit on a level surface, keep children away from pedals and packaging, do not touch hot hydraulic dampers, avoid water contact with the computer, and consult a physician before starting if you have medical conditions.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Compact stepper that simulates stair climbing and targets legs and glutes effectively.
  • Adjustable resistance screw lets you scale intensity and step height.
  • Detachable pull straps enable upper-body and full-body workouts.
  • Simple training computer shows time, step count, rpm and calories with auto-sleep.
  • Low-maintenance: weekly wipe-downs, occasional lubrication and easy battery replacement (LR44).
VS

Disadvantages

  • Display accuracy is Class C; metrics are approximate, not medical-grade.
  • Hydraulic dampers heat during use and can leak oil—requires care and possible mat underneath.
  • Pull straps limited to 185 cm stretch; overstretching can cause damage or injury.
  • Maximum user weight 120 kg may exclude heavier users.
  • Repairs require authorised service and original parts; DIY fixes not recommended.
M: OA-GPT-5-NAN

Product Specification

Colors

black, red

Max. user weight

264.55 lb

Dimensions

14.17x10.24x15.35 in

Weight

6.17 lb

M: OA-GPT-54-NAN

Product Description

Sportstech STX300 Stepper — Efficient Home Cardio and Strength Trainer

The Sportstech STX300 Stepper is a compact, versatile fitness device designed to simulate stair climbing while offering additional resistance training via detachable pull straps. Built for home use and rated for users up to 120 kg, the stepper combines hydraulic damping, an adjustable resistance screw, non-slip feet and a simple training computer to help improve cardiovascular fitness, tone legs and glutes, and strengthen upper body muscles when using the straps.

Key features and how it helps

The STX300 uses hydraulic cylinders for smooth stepping action and includes cushioning on the pedals to reduce impact. A bottom-mounted adjusting screw lets you increase resistance and step height, letting you scale workouts from light cardio to more intense sessions. The pull straps (max stretch 185 cm) attach via carabiners to dedicated eyelets and enable arm, shoulder and back exercises while stepping or stationary.

A basic training computer displays mode, step count (CNT), elapsed time (TIME), strides per minute (STRIDES/MIN), calories (CAL) and a SCAN mode that cycles data every four seconds. It runs on an LR44 battery and auto-sleeps after five minutes of inactivity.

Practical guidance for users

Before starting, warm up 5–10 minutes and perform recommended stretches (quadriceps, hamstrings, calves, inner thigh, head/shoulder mobility). Start with short daily sessions (10–15 minutes) and increase intensity gradually; a sample weekly pattern is three days training, one day rest, two days training, one day rest. Maintain upright posture, avoid hollow lower back, and distribute load between legs when stepping. Keep wrists neutral when using pull straps and hold handles horizontally.

Maintenance is straightforward: clean weekly with a soft damp cloth, lubricate moving parts if squeaks occur, and regularly check screws, plastic washers, pedals and straps for wear. Replace the LR44 battery when the display dims. For safety, place the stepper on a stable, level surface with ~2 x 2 meters clearance and consider a non-slip rubber mat to protect floors from possible hydraulic oil leaks.

Safety notes

The stepper is not a toy—keep children away from pedals and packaging film. Hydraulic dampers heat during use—do not touch. Only qualified technicians should perform repairs and only original parts should be used. Avoid exposing the computer to water or strong sunlight and remove the battery if storing the unit for extended periods.

Quick setup tips

  • Attach the two pull-strap carabiners to the designated eyelets.
  • Fit the four end caps on the main frame so feet align with the floor.
  • Turn the bottom adjustment screw clockwise to increase resistance.
  • Scan the QR code or visit www.sportstech.de/qr/stx300.html for video tutorials on assembly and use.

Notes:

  • Maximum user weight: 120 kg.
  • Pull straps max stretch: 185 cm; overstretching risks damage and injury.
  • Device meets display accuracy Class C—use displayed metrics as estimates.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly