Manual.ly Logo

Spinder SC2 Manual

0.0 · 0 Ratings

PDF manual · 92 Pages

English

M: OA-GPT-5-NAN
page

/ 92

Loading...
bdc1b9de1a15b5739130bb3f42c524a4cfb3 page 9
9
WAARSCHUWING!
Lichamelijk letsel of materiële schade veroorzaakt door het verlies van
fietsen.
Het rijden zonder spanbanden kan leiden tot ongelukken.
Controleer voor het begin van iedere rit de goede staat en stevigheid
van de spanband om de fietsframes en de framehouders van de
fietsendrager (zie stap 8 hoofdstuk “Fietsen op de fietsendrager
plaatsen”).
Controleer voor het begin van iedere rit de goede staat en stevigheid
van de beide spanbanden om het voor- en achterwiel van de fiets(en).
Trek de spanbanden eventueel na.
Controleer voor het begin van iedere rit, of de gebruikte spanbanden
onbeschadigd en niet versleten zijn.
Beschadigde of versleten spanbanden moeten voor het begin van de rit
worden vervangen voor onbeschadigde spanbanden. Alleen
spanbanden die door Tradekar Benelux BV zijn toegestaan, mogen
worden gebruikt.
WAARSCHUWING!
Lichamelijk letsel of materiële schade veroorzaakt door overhangende
onderdelen.
Over het uiteinde van het motorvoertuig dan wel over het uiteinde van de
fietsendrager hangende onderdelen kunnen tijdens het rijden lichamelijk
letsel of materiële schade veroorzaken.
Monteer alleen onderdelen die niet over het uiteinde van het voertuig
uitsteken.
WAARSCHUWING!
Lichamelijk letsel of materiële schade veroorzaakt door dekzeilen.
Dekzeilen verhogen de luchtweerstand. Zij kunnen losraken en
rondvliegen, wat tot ernstige ongevallen kan leiden.
Gebruik geen dekzeilen of andere soorten afdekking.
WAARSCHUWING!
Lichamelijk letsel of materiële schade veroorzaakt door het verlies van de
fietsendrager.
De fietsendrager gaat na bevestiging en na een paar gereden kilometers
pas echt goed vastzitten op de trekhaak.
Controleer na een paar kilometer de bevestiging van de fietsendrager
op het goed vastzitten op de trekhaak.
Zet de fietsendrager opnieuw vast indien deze (te) los op de trekhaak
zit.
WAARSCHUWING!
Lichamelijk letsel of materiële schade veroorzaakt door het afbreken van
de fietsendrager.
Door met de fietsendrager in ruw terrein te rijden kan deze afbreken.
Gebruik de fietsendrager niet in ruw terrein.
Rijd langzaam over verkeersdrempels: max. snelheid 10km/h.

Chat with your Spinder SC2 manual using AI

Get instant AI answers from your Spinder SC2 manual

Ask anything about the Spinder SC2. Answers come from this manual, with the pages they are based on.

SC2 Maintenance Schedule

Before every journey
Check straps and fasteners

Inspect all safety straps for damage or wear before each trip. Replace any damaged or worn straps immediately.

Every few kilometers
Verify carrier attachment

After driving a few kilometers, check that the bike carrier is securely locked to the tow hitch.

As needed in coastal/winter use
Clean the bike carrier

Wash off salt and dirt regularly when used near the coast or in winter conditions using mild soap and warm water.

Show in the manual (page 20)
After use
Slide carrier to transport position

Always slide the carrier back into the transport position after use to prevent dirt accumulation in the sliding mechanism.

Show in the manual (page 20)
When dirty
Rinse sliding mechanism

If the sliding mechanism becomes fouled, rinse it with water to ensure smooth operation.

Show in the manual (page 20)
When paint is damaged
Repair powder coating

Have any damage to the protective powder coating professionally repaired as soon as possible to prevent corrosion.

Show in the manual (page 20)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend SC2?

Yes No

Frequently Asked Questions

A

The Spinder SC2 carries up to two bicycles as standard. By adding the XB1 adapter (article S40001), it can transport a third bicycle. Total load must not exceed the carrier’s 60 kg maximum or the towbar's permitted ball load.

Is this answer helpful?

A

Mount only on couplings made of steel St52 or grey cast iron GG52 (or better) with a D‑value >7.6 kN and a Ø50 mm tow ball (class A‑50 per EC 94/20 or ECE R55). Do not mount on aluminium, light‑metal or plastic couplings.

Is this answer helpful?

A

Inspect all straps for wear and secure fastening of frame holders and wheel straps. Ensure quick‑release levers and U‑bracket are locked, lighting is functional, the carrier is fully slid and locked into transport position, and coupling attachment is tight (recheck after a few kilometres).

Is this answer helpful?

A

Rinse off salt and dirt with water, clean with mild detergent and a soft cloth, avoid solvents, and let it air dry. Regularly check sliding rails and rinse them if contaminated. Repair damaged powder coating professionally to prevent corrosion.

Is this answer helpful?

A

Driving dynamics change with the carrier and load; adapt speed accordingly. The guidance recommends not exceeding 130 km/h and to drive slowly over rough terrain or speed bumps (max 10 km/h). Always follow local legal limits and safe driving practices.

Is this answer helpful?

A

The carrier uses an integrated housing with both 7‑pin and 13‑pin (Jaeger) connectors to match most vehicles. Cover the unused connector with the supplied cap. Electrical conversion should be performed only by a qualified specialist.

Is this answer helpful?

A

Adjust the quick‑connector: remove the carrier, slightly loosen the lock nut, turn the adjustment screw a quarter turn inward, retighten the lock nut, then refit and check the secure fit. Repeat until the carrier sits firmly.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Slide-out design allows easy access to the vehicle boot without full removal of the carrier.
  • Foldable, lightweight construction (≈21–24 kg) for easier handling and storage.
  • Universal 7/13‑pin LED lighting housing fits most towbar electrics; unused plug covered.
  • Lockable frame holders and multiple straps secure bikes and deter theft.
  • Optional accessories (XB1 adapter for a third bike, RO1 ramp) increase versatility.
VS

Disadvantages

  • Requires a strong, specific towbar (steel St52 or GG52, D-value >7.6 kN); incompatible with aluminium or plastic couplings.
  • Maximum payload limited to 60 kg; heavier e-bikes may need careful weight distribution or be unsuitable.
  • Sliding mechanism can collect dirt; regular cleaning required, especially after coastal/winter use.
  • Incorrect installation or unsecured parts risk detachment or loss of bikes; requires careful setup.
  • Some maintenance (quick‑connector adjustment, strap replacement) may be needed over time.
M: OA-GPT-5-NAN

Product Specification

Type

Bicycle carrier

Mounting

Rear/Towbar

Load capacity sports equipment

2 Bicycles

Max. load capacity

132.28 lb

Features

Taillights (13-Pin)

Color

black

Weight

46.30 lb

M: OA-GPT-54-NAN

Product Description

Spinder SC2 Manual — Reliable, robust bike carrier

The Spinder SC2 is a sliding towbar-mounted bike carrier built from steel and aluminium, designed to transport two bikes (expandable to three with the XB1 adapter). It combines a compact foldable design, LED lighting with universal 7/13‑pin connector, and secure frame and wheel fastening to deliver safe, everyday bicycle transport for cars and campers.

Key features and usage

The SC2 is slidable to allow rear access to the vehicle, foldable for convenient storage, and equipped with lockable frame holders and multiple straps for wheels and frames. The carrier’s modular construction uses powder-coated steel components and aluminium sliding rails to resist corrosion while keeping weight manageable (approx. 21 kg for the 2-bike version, 24 kg with the XB1 adapter).

Mounting requires a trailer coupling meeting specific strength criteria (steel St52 or GG52, D-value > 7.6 kN, Ø50 mm tow ball). The carrier’s maximum payload is 60 kg; total system loads must respect the towbar’s permitted ball load. A quick‑connector with adjustable locking nut ensures a tight fit to the coupling; guidance for readjustment is provided.

Practical design elements include extendable wheel holders, quick‑release levers for U‑bracket fixation, an integrated license‑plate holder and lamp protection, and an optional ramp (RO1) to roll bikes onto the rails. LED lights in a combined housing support both 7‑ and 13‑pin wiring standards; unused plug openings should be covered with the supplied cap.

Safety and maintenance

Safety is emphasized throughout: verify strap condition before every trip, fully extend and lock moving parts, do not exceed coupling or carrier load limits, and observe a maximum advised speed (never exceed legal limits; recommended max 130 km/h). Avoid rough terrain and slow to 10 km/h over speed bumps. Clean after coastal or winter use to remove salt; repair damaged powder coating promptly. Replace worn straps or damaged parts only with approved components.

Notes

  • Use only on suitable couplings (no aluminium or plastic couplings).
  • After initial installation, recheck coupling security after a few kilometres and retighten or readjust the quick connector if needed.
  • Remove loose bike accessories (e-bike batteries, pumps, child seats) before transport.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly