Spinder SC2 Manual
PDF manual · 92 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Spinder SC2 manual using AI
Get instant AI answers from your Spinder SC2 manual
Ask anything about the Spinder SC2. Answers come from this manual, with the pages they are based on.
SC2 Maintenance Schedule
Inspect all safety straps for damage or wear before each trip. Replace any damaged or worn straps immediately.
After driving a few kilometers, check that the bike carrier is securely locked to the tow hitch.
Wash off salt and dirt regularly when used near the coast or in winter conditions using mild soap and warm water.
Always slide the carrier back into the transport position after use to prevent dirt accumulation in the sliding mechanism.
If the sliding mechanism becomes fouled, rinse it with water to ensure smooth operation.
Have any damage to the protective powder coating professionally repaired as soon as possible to prevent corrosion.
Ask a Question
Do you recommend SC2?
Yes NoFrequently Asked Questions
The Spinder SC2 carries up to two bicycles as standard. By adding the XB1 adapter (article S40001), it can transport a third bicycle. Total load must not exceed the carrier’s 60 kg maximum or the towbar's permitted ball load.
Is this answer helpful?
Mount only on couplings made of steel St52 or grey cast iron GG52 (or better) with a D‑value >7.6 kN and a Ø50 mm tow ball (class A‑50 per EC 94/20 or ECE R55). Do not mount on aluminium, light‑metal or plastic couplings.
Is this answer helpful?
Inspect all straps for wear and secure fastening of frame holders and wheel straps. Ensure quick‑release levers and U‑bracket are locked, lighting is functional, the carrier is fully slid and locked into transport position, and coupling attachment is tight (recheck after a few kilometres).
Is this answer helpful?
Rinse off salt and dirt with water, clean with mild detergent and a soft cloth, avoid solvents, and let it air dry. Regularly check sliding rails and rinse them if contaminated. Repair damaged powder coating professionally to prevent corrosion.
Is this answer helpful?
Driving dynamics change with the carrier and load; adapt speed accordingly. The guidance recommends not exceeding 130 km/h and to drive slowly over rough terrain or speed bumps (max 10 km/h). Always follow local legal limits and safe driving practices.
Is this answer helpful?
The carrier uses an integrated housing with both 7‑pin and 13‑pin (Jaeger) connectors to match most vehicles. Cover the unused connector with the supplied cap. Electrical conversion should be performed only by a qualified specialist.
Is this answer helpful?
Adjust the quick‑connector: remove the carrier, slightly loosen the lock nut, turn the adjustment screw a quarter turn inward, retighten the lock nut, then refit and check the secure fit. Repeat until the carrier sits firmly.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Slide-out design allows easy access to the vehicle boot without full removal of the carrier.
- Foldable, lightweight construction (≈21–24 kg) for easier handling and storage.
- Universal 7/13‑pin LED lighting housing fits most towbar electrics; unused plug covered.
- Lockable frame holders and multiple straps secure bikes and deter theft.
- Optional accessories (XB1 adapter for a third bike, RO1 ramp) increase versatility.
Disadvantages
- Requires a strong, specific towbar (steel St52 or GG52, D-value >7.6 kN); incompatible with aluminium or plastic couplings.
- Maximum payload limited to 60 kg; heavier e-bikes may need careful weight distribution or be unsuitable.
- Sliding mechanism can collect dirt; regular cleaning required, especially after coastal/winter use.
- Incorrect installation or unsecured parts risk detachment or loss of bikes; requires careful setup.
- Some maintenance (quick‑connector adjustment, strap replacement) may be needed over time.
Product Specification
Type
Bicycle carrier
Mounting
Rear/Towbar
Load capacity sports equipment
2 Bicycles
Max. load capacity
132.28 lb
Features
Taillights (13-Pin)
Color
black
Weight
46.30 lb
Product Description
Spinder SC2 Manual — Reliable, robust bike carrier
The Spinder SC2 is a sliding towbar-mounted bike carrier built from steel and aluminium, designed to transport two bikes (expandable to three with the XB1 adapter). It combines a compact foldable design, LED lighting with universal 7/13‑pin connector, and secure frame and wheel fastening to deliver safe, everyday bicycle transport for cars and campers.
Key features and usage
The SC2 is slidable to allow rear access to the vehicle, foldable for convenient storage, and equipped with lockable frame holders and multiple straps for wheels and frames. The carrier’s modular construction uses powder-coated steel components and aluminium sliding rails to resist corrosion while keeping weight manageable (approx. 21 kg for the 2-bike version, 24 kg with the XB1 adapter).
Mounting requires a trailer coupling meeting specific strength criteria (steel St52 or GG52, D-value > 7.6 kN, Ø50 mm tow ball). The carrier’s maximum payload is 60 kg; total system loads must respect the towbar’s permitted ball load. A quick‑connector with adjustable locking nut ensures a tight fit to the coupling; guidance for readjustment is provided.
Practical design elements include extendable wheel holders, quick‑release levers for U‑bracket fixation, an integrated license‑plate holder and lamp protection, and an optional ramp (RO1) to roll bikes onto the rails. LED lights in a combined housing support both 7‑ and 13‑pin wiring standards; unused plug openings should be covered with the supplied cap.
Safety and maintenance
Safety is emphasized throughout: verify strap condition before every trip, fully extend and lock moving parts, do not exceed coupling or carrier load limits, and observe a maximum advised speed (never exceed legal limits; recommended max 130 km/h). Avoid rough terrain and slow to 10 km/h over speed bumps. Clean after coastal or winter use to remove salt; repair damaged powder coating promptly. Replace worn straps or damaged parts only with approved components.
Notes
- Use only on suitable couplings (no aluminium or plastic couplings).
- After initial installation, recheck coupling security after a few kilometres and retighten or readjust the quick connector if needed.
- Remove loose bike accessories (e-bike batteries, pumps, child seats) before transport.
Search for 67,706 Manuals online
Type-in Brand or Model