Manual.ly Logo

SpeaKa Professional SP-TVM-512 Manual

0.0 · 0 Ratings

PDF manual · 4 Pages

English

M: QW-35-FL
page

/ 4

Loading...
0c146b9b05a205dadd433100de39cbab9538 page 2
IMPORTANT INFORMATION
Item no. 2559779
General safety instructions for Monitor holders
Dear customer!
As well as providing ergonomic improvement while you are working or playing, monitor holders
also create space.
Depending on which monitor holder you have, your monitor can be adjusted in height, tilted
or even rotated. In this way, the optimal adjustment of your monitor can be made to suit your
needs.
When xing it to a table top or a wall (depending on the design of the monitor holder), however,
there are a few important safety instructions which must be observed. Therefore, please read
the following sections carefully.
General
• A monitor holder is not a toy. Therefore, keep the product out of the reach of children.
• Do not leave packaging material carelessly lying around, since it could become a dangerous
plaything for children.
• The product is intended for use in dry indoor spaces only.
• Verify that the delivery content is complete before assembling the product. Do not assemble
the product if the delivery content is not complete.
• Selecting an unsuitable installation location can lead to personal or material damage!
• Proceed with care when assembling and installating the product! The product has some
sharp edges. There is a risk of injury!
• Carry out only the work on the monitor holder that is necessary in order to install it (or to
change its location). Never dismantle the monitor holder and never attempt to convert it
or to repair it in any way. Some monitor holders contain highly pre-stressed metal springs.
Dismantling such a monitor holder in the wrong way could cause you severe injury!
• Before beginning the installation process, check whether there are appropriate mounting
options for a monitor holder on the back of your monitor.
• It is usually necessary to remove the monitor’s base before mounting the monitor on a
monitor holder. Please consult the operating instructions for your monitor.
Lay the monitor at with its screen side down onto a soft, clean pad or cloth, so that there is
no pressure on the screen and the screen does not get scratched. Protect valuable furniture
surfaces during installation by using a suitable pad or cloth.
Remove the monitor’s base; depending on the monitor’s design, this will either be screwed
or clipped in.
• When xing the monitor holder to the back of the monitor, make absolutely certain that you
use the correct screws. Not only must these be of the correct thread type for the monitor, but
they must also not be too long; otherwise they will damage the monitor.
The screws must not be too short, however, since otherwise the connection will not be secure.
The screws must be screwed into the threaded xture holes on the monitor with at least 5
full 360° turns. The correct screws are usually supplied together with the monitor holder or
with the monitor. Occasionally, however (depending on the monitor type), other screws are
required; these can be purchased from specialist retailers.
Do not use any force when tightening the screws; otherwise the monitor may be destroyed,
leading to loss of warranty/guarantee!
If you have any doubt about the correct length of the screws required, we recommend that
you contact the monitor manufacturer or an appropriate specialist.
• Depending on the size and design of the monitor and monitor holder concerned, it is sensible
for a second person to help with the installation. This person can hold the monitor still, for
example, while you are attaching the monitor to the monitor holder.
• Apply your full concentration when carrying out the installation, because if the monitor and/or
monitor holder were to fall, this could cause expensive damage to the equipment and there
is the potential danger of personal injury!
• Lay all the monitor’s cables in such a way that they do not get jammed or kinked in the
monitor holder.
• Check all the screw ttings from time to time. Adjusting the position of the monitor and/or
the monitor holder and moving them can sometimes cause the screws to become loose
over time.
• Do not exert any force when moving/adjusting the monitor and/or monitor holder, as this
could damage the monitor.
• When moving/adjusting, do not press on the monitor’s screen!
• Do not overload the monitor holder. Pay attention to the details provided by the manufacturer
for the maximum monitor weight and/or its size.
• Do not use the monitor holder to support yourself or to hold onto.
• Do not x any objects to the monitor holder other than the monitor for which it was intended.
• If you are in any doubt, do not carry out the installation yourself; ask a qualied person to
do it for you.
Table Mounting
The following information is relevant for monitor holders that must be
mounted on a table top.
• Attach the monitor holder only to a sufciently stable, horizontal table top. Tables made of
glass, ceramic or stone slabs or thin plastic-coated wooden-bre slabs, are categorically
unsuitable for attachments.
Furthermore, you must not attach the monitor holder to shelves or similar unstable or
unsteady surfaces.
• Attach the monitor holder only at a position on the table top that is suitable for this purpose.
Consider the signicant lever action involved!
• The weight of the monitor and monitor holder as well as its xed position and signicant lever
action can all cause pressure marks on the table top. For this reason, we do not recommend
that you mount it on valuable furniture items!
• For safety reasons, the monitor holder and the monitor that is attached to it should be situated
only above the table surface. The design of many monitor holders means that it is not suitable
for the monitor arm to be situated anywhere other than above the table surface. There is also
a danger of it toppling over in certain circumstances!
• Ensure that the monitor holder is xed to the table top securely. Otherwise it could slip off
the table top when you are moving the monitor and the monitor holder. As well as causing
material damage, this poses a danger of personal injury!
Wall Mounting
The following information is relevant for monitor holders that must be
mounted on a vertical wall.
• Wall-mounting is permissible only where the wall concerned is of the correct type and
condition. Lightweight partition walls or those made from gypsum boards are normally
unsuitable. However, specialist retailers do sometimes stock special dowel ttings for such
installation locations. If you are in doubt, ask a specialist before installation.
Depending on the base wall material (e.g. concrete), suitable mounting materials must be
used (screws, dowels, etc.); these are not normally supplied with the monitor holder!
Due to the weight of the monitor and monitor holder and the lever action involved, ensure that
screws are xed securely.
• Plan the installation location carefully, so that the monitor holder with the monitor xed to it
will be situated at the correct height when you have nished.
• Use a spirit level to assist you with mounting the monitor holder on the wall correctly.
• Make certain when drilling and tightening the screws that no cables or pipes are damaged.
Inadvertently drilling through electric cables causes the life-threatening danger of an electric
shock!
Pay special attention to your safety when using electric tools (e.g. a drill).
• Make certain when mounting the product on a wall that nobody is situated in the area
underneath the monitor holder and/or monitor.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
Copyright 2022 by Conrad Electronic SE. *2559779_v1_0422_02_dh_ss_4L

Chat with your SpeaKa Professional SP-TVM-512 manual using AI

Get instant AI answers from your SpeaKa Professional SP-TVM-512 manual

Ask anything about the SpeaKa Professional SP-TVM-512. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend SP-TVM-512?

Yes No

Frequently Asked Questions

A

No, glass, ceramic, stone, or thin wood plates are unsuitable. Pressure marks and slippage risks exist.

Is this answer helpful?

A

Usually, but sometimes you need specific lengths. Ensure at least 5 full turns for security.

Is this answer helpful?

A

Standard drywall is often unsuitable unless using special dowels. Check if material is suitable first.

Is this answer helpful?

A

Long screws may damage the monitor internals. Short screws may not hold securely. Contact the manufacturer for advice.

Is this answer helpful?

A

It is sensible for a second person to help hold the monitor steady during the actual attachment process.

Is this answer helpful?

A

Exerting force can destroy the monitor and lead to loss of warranty or guarantee from the seller.

Is this answer helpful?

A

No. Do not use the monitor holder to support yourself. Only fix the intended monitor to it.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Improves ergonomics and creates desk space by raising the monitor.
  • Allows height, tilt, and rotation adjustments for optimal viewing angles.
  • Can help keep cables organized and prevent them from kinking inside.
VS

Disadvantages

  • Installation requires careful preparation to avoid wall or furniture damage.
  • Heavy monitors increase lever action which may damage weak table surfaces.
  • Incorrect screw length can permanently damage the monitor display panel.
M: QW-35-FL

Product Specification

Type

Wall Mount

Number of Monitors

2

Screen Size

13-27"

Mobility

Tilt (-45°, +45°), Rotate (180°), Swivel (15°), Extendable, Height Adjustable

Max Load

22.05 lbs

VESA

min. 75x75, max. 100x100

Color

Black

Weight

7.36 lbs

M: QW-35-FL

Product Description

Elevate Your Workspace with the SpeaKa Professional SP-TVM-512

Transform your desk environment into a zone of peak productivity and comfort. The SpeaKa Professional SP-TVM-512 is designed to enhance ergonomics while creating valuable free space on your desk. When you install this monitor holder correctly, you can adjust the screen height, tilt, and even rotate the display to match your specific needs. This flexibility is crucial for reducing neck and back strain during long work sessions. However, achieving this comfort requires careful attention to installation details, much like those outlined in the comprehensive guidelines associated with the SpeaKa Professional SP-TVM-512 Manual. Ignoring these steps can lead to equipment failure or personal injury.

Mounting Options for Every Setup

You have the choice between table mounting or wall mounting depending on your office layout. For table mounting, it is vital to attach the holder only to a stable, horizontal surface. Avoid glass or thin wooden tables as they may not support the weight. The lever action generated by the arm exerted force on the table surface, so pressure marks can occur on valuable furniture. To prevent damage, place a protective cloth underneath during the process. The arm should remain above the surface for stability to avoid toppling risks.

Wall mounting offers a clean look but demands specific wall conditions. Lightweight partition walls or drywall often require special dowels which might not be included in the package depending on the region. Always check the wall material before drilling to avoid damaging internal cables or pipes. Electrical safety is paramount when using power tools during this phase. If you are unsure about the structural integrity, consult a professional before starting. The safety instruction manual emphasizes verifying the contents before assembly.

Safety and Assembly Guidelines

The product includes pre-tensioned springs in some models, making disassembly dangerous if handled incorrectly. Never force screws when attaching the monitor to the back. Use the correct length screws to avoid damaging the internal display panel. Ensure at least five full turns of thread are engaged for a secure hold. Removing the original stand of your monitor is usually necessary before fixation. Lay the screen face down on a soft surface to prevent scratches. Sharp edges require care during handling to avoid injury.

Maintenance and Usage Tips

Once installed, check screws periodically. Adjustments can loosen fixings over time. Do not overload the holder with monitors exceeding weight limits specified by the manufacturer. Avoid pressing on the screen or leaning on the arm itself. Cables should be routed to prevent kinking inside the holder arm. Keeping the area free of children and ensuring the product stays dry are also essential safety rules. A second person helps during the setup process to hold the device steady. Follow these strict instructions to ensure the longevity of your gear and your own safety during regular use. Never attempt repairs or unauthorized modifications to the frame as this voids warranties and causes risks to users.

M: QW-35-FL

© Copyright 2026 Manual.ly