Solplanet ASW LT-G2 Manual
PDF manual · 68 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Solplanet ASW LT-G2 manual using AI
Get instant AI answers from your Solplanet ASW LT-G2 manual
Ask anything about the Solplanet ASW LT-G2. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend ASW LT-G2?
Yes NoFrequently Asked Questions
It is a range of three-phase, transformerless string inverters that convert DC electricity from photovoltaic arrays into grid-compliant AC electricity. The series covers output ratings from 30 kW to 50 kW.
Is this answer helpful?
ASW 30K, 33K, and 36K models have three independent MPPTs. ASW 40K and 45K models have four MPPTs, while the ASW 50K model has five. Each MPPT supports two strings.
Is this answer helpful?
Yes. The series has an IP65 protection rating and is intended for indoor or outdoor use. It should be mounted with adequate airflow and protected from prolonged direct sunlight, snow, and rain where possible.
Is this answer helpful?
The inverter can use optional WiFi or 4G sticks for cloud and app monitoring. It also supports RS485 communication, smart meter connections, and Modbus communication with compatible third-party devices.
Is this answer helpful?
All listed ASW LT-G2 models have a maximum DC input voltage of 1100 V and a rated input voltage of 630 V. PV string open-circuit voltage must remain within the permitted inverter limit.
Is this answer helpful?
Regularly inspect the inverter and cables for visible damage, keep the heat sink clear, and clean it with compressed air or a soft brush when needed. The DC switch contacts should be cycled through ON and OFF positions five times yearly.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Six power classes from 30 kW to 50 kW support a wide range of commercial solar projects.
- Three to five independent MPPTs and two strings per tracker improve design flexibility for varied PV array layouts.
- IP65 enclosure, active cooling, and -25 C to +60 C operating range support demanding indoor or outdoor locations.
- WiFi, 4G, RS485, smart meter, Modbus, and remote firmware update options support monitoring and control.
- Integrated grid, insulation, residual current, anti-islanding, and DC injection protection enhance system safety.
Disadvantages
- Installation and service require qualified electrical personnel because of hazardous DC and AC voltages.
- The inverter weight of up to 43 kg may require careful lifting and secure wall mounting.
- Optional WiFi or 4G hardware may be needed for cloud monitoring and remote firmware updates.
- Performance can be reduced if airflow is restricted or the unit is exposed to prolonged direct sunlight.
- Smart meter power control has communication limits, including a maximum 100 m cable length in the stated setup.
Product Description
Solplanet Three Phase String Inverter - Read, Download & Print Free
The Solplanet Three Phase String Inverter - Read, Download & Print Free introduces the ASW LT-G2 Series, a robust solar conversion solution for commercial and large residential photovoltaic installations. Designed to transform DC electricity from solar modules into grid-compliant three-phase AC power, this transformerless inverter range combines high-capacity performance, flexible string design, and practical monitoring options.
Built for scalable solar generation
The ASW LT-G2 range includes 30 kW, 33 kW, 36 kW, 40 kW, 45 kW, and 50 kW output classes. This selection helps installers match inverter capacity to different array sizes and project requirements. The units support PV power ratings from 45,000 W to 75,000 W at STC, with a maximum DC input voltage of 1100 V and an MPPT operating range of 200 V to 1000 V.
Independent maximum power point trackers support flexible array layouts. The 30K to 36K models include three MPPTs, while the 40K and 45K versions provide four, and the 50K model provides five. Each tracker supports two strings, helping system designers accommodate varying roof orientations, module groups, and irradiation conditions.
Durable design for demanding sites
With IP65 protection, the ASW LT-G2 Series is suitable for indoor and outdoor installation. Its active cooling system supports reliable operation in ambient temperatures from -25 C to +60 C, while the maximum installation altitude reaches 3000 m. The compact enclosure measures 670 x 580 x 270 mm, with a weight of approximately 42 to 43 kg depending on the model.
Wall mounting is supported through the included bracket system. Proper placement is important for long-term performance: adequate clearance, airflow, vertical positioning, and protection from prolonged direct sunlight can help minimize heat-related power reduction. The product also includes integrated protection functions for grid monitoring, insulation monitoring, residual current monitoring, anti-islanding, and DC injection monitoring.
Connected monitoring and control
Optional WiFi and 4G connectivity provide access to Solplanet monitoring through AISWEI Cloud and the mobile app. RS485 communication supports linked inverter systems, smart meter integration, and Modbus communication with compatible third-party equipment. Remote firmware updates can also be completed through a WiFi or 4G stick, reducing on-site maintenance work.
Smart meter support enables active power control, while compatible installations can use demand response functions. Three LED indicators offer immediate status visibility for solar production, communications, and faults.
Notes
Installation, electrical connections, commissioning, and servicing should be performed by qualified electricians. Correct grounding, cable sizing, PV string polarity, grid settings, and safe isolation procedures are essential for dependable operation.
Search for 67,706 Manuals online
Type-in Brand or Model