Smartwares SC50/6 Manual
PDF manual · 2 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Smartwares SC50/6 manual using AI
Get instant AI answers from your Smartwares SC50/6 manual
Ask anything about the Smartwares SC50/6. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend SC50/6?
Yes NoFrequently Asked Questions
No. The Smartwares SC50-6 is preprogrammed and ready to use out of the box. Pairing is only required after performing a factory reset.
Is this answer helpful?
The system uses 433.92 MHz RF with an approximate transmission distance of 30 meters in open space. Actual range may be reduced by walls, interference, or obstructions.
Is this answer helpful?
The main alarm typically uses 4x AA batteries. Remotes use CR2032 coin cells. Other components may require AG13 button cells or AAA batteries depending on the sensor type—check each device label.
Is this answer helpful?
Alarm sound intensity can reach up to 110 dB for the main siren; some components output 85–100 dB. Preset ring and alarm durations are commonly 10–30 seconds depending on the mode and device.
Is this answer helpful?
The kit supports multiple devices; typical configurations include up to four detectors and two remotes. The system uses coded combinations (up to 1,000,000 codes) to uniquely identify paired devices.
Is this answer helpful?
After a factory reset, you must re-enter learning (pairing) mode and re-pair all sensors and remotes to the main unit to restore functionality.
Is this answer helpful?
The SC50-6 is intended for basic, portable security and supplementary use. It is not a substitute for professional wired alarm systems for large properties or high-security needs.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Preprogrammed out of the box for immediate use without initial pairing.
- Battery-powered, portable and easy no-wiring installation.
- Loud siren up to 110 dB to deter intruders and attract attention.
- Supports multiple sensors and remotes with many code combinations.
- Compact design suitable for temporary or supplementary security.
Disadvantages
- Battery replacement required frequently for reliable operation.
- RF range limited to approximately 30 meters; walls can reduce distance.
- After a reset all devices must be re-paired manually.
- Not a fully professional wired alarm—limited to small areas and basic protection.
- Some components use different battery types, complicating maintenance.
Product Specification
Type
Set
Standard
Radio bus (433.92MHz)
Function
Motion, Warning function, Gateway, Close/Open sensor
Topology
Star
Special features
App controllable, battery operated
Set consisting of
1x Gateway, 2x Control element, 4x Sensor
Product Description
Smartwares SC50-6 Wireless Mini Alarm Set Manual
Overview
The Smartwares SC50-6 Wireless Mini Alarm Set is a compact, battery-powered security solution designed for quick installation and flexible use. The kit includes a central alarm unit, multiple detectors, and RF remotes that communicate on 433.92 MHz. It delivers loud alerts (up to 110 dB) and offers simple preprogrammed pairing so you can secure doors, windows, or small spaces in minutes.
What’s in the kit
The set typically contains one main alarm unit, up to four wireless detectors, and two RF remotes. Required batteries include 4x AA for the main unit, CR2032 for remotes, AG13 cells for certain components, and AAA for motion-type sensors. Transmission range is approximately 30 meters in open space, and the system supports up to 1,000,000 code combinations for device pairing.
Key features
- Wireless RF operation at 433.92 MHz with a ~30 m transmission distance.
- Loud alarm outputs: main siren up to 110 dB and secondary alerts around 90–100 dB depending on component.
- Multiple input devices supported (magnetic contact sensors, motion detectors, remotes) with up to four detectors and two remotes per system.
- Preprogrammed from factory so initial learning/pairing is not required; only necessary after a reset.
- Lightweight, battery-operated design for no-wiring installation and portable use.
Usage and setup notes
Out of the box the components arrive preinstalled and paired for immediate use. After a factory reset, manual learning/pairing of each detector and remote is required. The system offers simple on/off controls, audible beeps for status feedback, and preset ring/alarm durations (typical siren durations 10–30 seconds depending on mode). Detection parameters for motion sensors include a 110° angle and up to 10 meters distance.
Practical applications
This set is suitable for temporary or supplementary security in apartments, sheds, temporary rentals, offices, or children’s rooms. Its portability and battery power make it a good choice where drilling, wiring, or permanent installation is not desired. The loud siren can deter intruders and alert occupants or neighbors.
Notes
- Replace batteries regularly to ensure reliable operation; different components use different battery types.
- Keep components within ~30 m line-of-sight for best RF performance.
- After any reset, re-pair all sensors and remotes to the main unit.
Search for 67,706 Manuals online
Type-in Brand or Model
Damien Taylor
7 months ago
Does the alarm delay take 60 seconds after arming, and about 10 seconds after a motion sensor triggers? Can these delays be adjusted in the settings?
Manual.ly
7 months ago
Thanks for the details. Some versions use a fixed arming delay (often up to about 60 seconds) and a separate entry/trigger delay before the siren starts. Whether it can be adjusted depends on your exact model/firmware and installation mode. Please check the app or control panel menu for settings like Arming delay, Entry delay, or Alarm delay. If you do not see these options, your firmware may not support changes and we can advise on the correct configuration or an update. If you share your model number and firmware/app version, we can help pinpoint the exact behavior and the best available alternative setup.