Manual.ly Logo

SimGrade R7 Manual

0.0 · 0 Ratings

PDF manual · 23 Pages

English

M: OA-GPT-5-NAN
page

/ 23

Loading...
5f9244f864e72790e5200e86eccbf763bebc page 2
2
Table of contents
Table of contents 2
1. General 3
1.1 Varoitukset ja ohjeet turvalliselle käytölle 4
1.1.1. Käyttöympäristö ja turvalliset säilytysolosuhteet 4
1.1.2. Takuu 4
1.1.3. CE-Merkintä 4
1.1. Warnings & instructions for safe usage 5
1.1.1. Operating environment and safe storage conditions 5
1.1.2. Warranty 5
1.1.3. CE-Marking 5
1.4. Mounting the pedals 6
1.5. Connecting the pedals to the controller box and to the PC 6
1.6. Grounding 7
1.7. Maintenance 8
2. Mechanical Adjustments 8
2.1. General 8
2.2. Brake 11
2.2.1. Included Elastomer / Spring configurations 14
Soft: 5pcs, L=10mm: 15
Hard: Steel Spring: 16
2.2.6. Brake travel limiter 17
2.3. Throttle 18
2.4. Clutch 19
3. Software 20
3.1. General 20
3.2. Layout 21
3.3. Limiting the maximum braking signal with the software 23

Chat with your SimGrade R7 manual using AI

Get instant AI answers from your SimGrade R7 manual

Ask anything about the SimGrade R7. Answers come from this manual, with the pages they are based on.

R7 Maintenance Schedule

As needed
Clean pedals with dry cloth

Clean the pedals only with a dry cloth. Do not use petroleum-based lubricants.

Every few years
Replace felt pads for stoppers

The provided felt pads last several years. Replace them if worn using local products cut to ~25mm x 12mm.

M: QW-35-FL

Ask a Question

0/1000

Do you recommend R7?

Yes No

Frequently Asked Questions

A

Use four M6 bolts with washers per pedal on a sturdy platform (recommended aluminium extrusion profile). Mounting pattern is 80 mm (longitudinal) x 87 mm (lateral). Ensure the platform can withstand pedal forces and tighten nuts from the nut side when applicable.

Is this answer helpful?

A

Connect brake to the middle controller port, throttle to the port beside USB-out, and clutch to the third port. Plug the controller directly into a rear motherboard USB 2.0 port (avoid USB hubs) for optimal stability and performance.

Is this answer helpful?

A

Adjust the leverage angle (25 positions), change elastomer count/length or use the steel spring, and set preload with the double finger nut. A travel limiter provides a repeatable haptic endpoint while the load cell still measures force.

Is this answer helpful?

A

If stationary signal variation exceeds ~10 units (out of 4096) or you experience EMI, ground the pedals by connecting the controller box (M3 ring) to the throttle pedal frame (M5 fork). Tighten the pedal end firmly and avoid over-torquing the box end.

Is this answer helpful?

A

Clean with a dry cloth and avoid petroleum-based lubricants. If lubrication is needed, use dry PTFE spray only. Felt stopper pads are replaceable (approx. 25x12 mm) and available from SimGrade or local alternatives.

Is this answer helpful?

A

Software handles calibration, dead-zone setting, signal filtering, profile saving, and clutch enabling. Always recalibrate after mechanical changes and close the app before launching a simulator. Profiles save to the board automatically or via file.

Is this answer helpful?

A

A two-year warranty covers manufacturing defects but excludes damage from misuse, neglect, accidents after delivery, failure to follow care instructions, and normal wear. Follow the manual guidelines to keep warranty valid.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Highly adjustable brake with 25-step leverage and multiple elastomer/spring options for precise feel.
  • Robust mounting and metal construction suitable for serious sim rigs; recommended M6 4-bolt pattern.
  • Comprehensive software: calibration, dead zones, filters, profile saving, and clutch enable/disable.
  • Grounding procedure and USB port guidance reduce EMI issues and improve signal stability.
  • Low maintenance: dry cloth cleaning, replaceable felt stoppers, and safe lubrication option (PTFE).
VS

Disadvantages

  • Requires a sturdy mounting platform and correct M6 hardware—additional rig costs possible.
  • Some mechanical adjustments (elastomer counts, preload) require careful tuning and maintenance.
  • Avoids use with USB hubs—direct motherboard connection may be inconvenient for some setups.
  • Load-cell brake still registers force beyond travel limiter, which can surprise users without calibration.
  • Plastic parts have a 6 Nm torque limit; overtightening risks deformation or damage.
M: OA-GPT-5-NAN

Product Specification

Type

Pedals

Compatibility

PC

Material

Steel

Mounting

screwable

Connectivity

wired, USB

Power supply

USB

M: OA-GPT-54-NAN

Product Description

SimGrade R7 Pedals — Precision Racing Pedals

The SimGrade R7 Pedals deliver a high-end force-feedback pedal experience tailored for sim racers who demand accuracy, adjustability, and durable build quality. Built around a robust load-cell brake system and multi-adjustable throttle and clutch, the R7s combine mechanical versatility with a refined software suite to fine-tune response and feel.

Design and build

The pedals are engineered for a solid rig: each pedal mounts with four M6 bolts to a sturdy platform and the controller box connects via USB (recommended directly to the PC motherboard). Materials and assembly emphasize durability—metal linkages, adjustable pedal faces, and replaceable felt stoppers—while user safety is addressed with clear warnings about small parts, sharp edges, and recommended torque limits for plastic fastenings.

Brake system and adjustability

At the heart of the R7 set is a configurable brake that uses elastomers or an optional steel spring. Multiple elastomer lengths and counts provide many stiffness and travel combinations, and a 25-step leverage angle adjustment lets you tune resistance and travel precisely. A travel limiter gives consistent haptic feedback at the end of travel while the load cell continues to register force beyond the stopper.

Throttle and clutch

The throttle features preload control, progressive resistance tuning via rod-end position, and a removable end stopper for travel limits. The clutch offers spring-change options and adjustable pressure plates to alter engagement feel and overall stiffness.

Electronics, grounding and software

Connection guidance includes specific port assignments (brake center, throttle next to USB-out, clutch on third port) and a recommendation to avoid USB hubs. If electrical noise or unstable signals occur, a grounding cable between controller and pedal frame is described. The companion software enables calibration, dead-zone adjustment, signal filtering, profile saving, and clutch enable/disable. Users are advised to always recalibrate after mechanical tweaks and to close the app before launching simulations.

Practical notes on maintenance and warranty

Routine maintenance is minimal: clean with a dry cloth and, if lubrication is required, use dry PTFE spray only. Felt pad stoppers are replaceable. The product carries a two-year warranty with standard exclusions (misuse, neglect, normal wear). Operating environment: indoor use at 15–35°C, non-condensing humidity.

Notes

  • Always fasten pedals with M6 bolts and respect the 6 Nm torque limit on plastic connections.
  • Calibrate after every mechanical change and save profiles in software for convenience.
  • Avoid petroleum-based lubricants; use PTFE dry spray if needed.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly