Manual.ly Logo

Siedle Classic CL 111 Manual

0.0 · 0 Ratings

PDF manual · 20 Pages

English

M: QW-35-FL
page

/ 20

Loading...
d4eb3daad45503b0352691bca7eb11c8a259 page 7
7
Service
8 Namensschildwechsel
Ruftaste mit den Kreuzschlitz-
schrauben rechts und links des
Namensschild aufschrauben und
nach vorne entnehmen.
Name nach Bedarf beschriften und
wieder einsetzen.
Auf Wunsch erfolgt die Beschriftung
durch den Siedle Beschriftungs-
service. Fragen Sie hierzu Ihren
Elektroinstallateur oder direkt bei
Siedle. www.siedle.de
9 Modul auswechseln
Den Modulträger an den 4 Befesti-
gungsmuttern (Schlüsselweite 5,5)
aufschrauben und das Modul im
Modulträger entnehmen. Ein bereits
angeschlossener Klemmblock muss
nicht abgeklemmt werden, dieser
kann durch eine Linksdrehung gelöst
werden.
10 Das Modul an den 2 Rastnasen
entriegeln und nach vorne aus dem
Modulträger drücken.
Beim Einsetzen des Modules auf die
richtige Einbaulage achten
(Einhängung der Halteschnur ist
OBEN). Falls erforderlich, kann der
am Modulträger befestigte Klemm-
block durch eine Linksdrehung
entfernt werden.
• Pflegehinweise
ii
Zur regelmäßigen Pflege ihrer
Siedle-Classic-Türstation kann ein
handelsübliches Metallpflegemittel
(ohne scheuernde Stoffe), das Sie
mit einem Tuch oder Fensterleder
auftragen, verwendet werden.
Damit keine Flecken oder Verfär-
bungen entstehen, sollte das Pflege-
mittel rückstandslos abgewischt
werden.
Kunststoffteile, wie z.B. das
Namensschild, dürfen mit dem
Metallpflegemittel nicht gereinigt
werden. Es besteht die Gefahr, dass
die Kunststoffteile milchig werden.
Wir bitten um Verständnis, dass wir
für Schäden dieser Art keine
Haftung übernehmen können.
English
Installation
Application
Siedle-Classic CL 111 is designed for
exchange against previous door
station models of the Portavox series
TL 111-1A - TL 111-5C. These were
manufactured during the years 1968
to 1988.
The number TL 111-1 A stands for
the series, the number TL 111-1 A
for the number of call buttons, and
the letter TL 111-1 A for the
previous size of the flush mount
housing.
When exchanging an old Portavox
door station, the existing flush
mount housing must be retained, as
the new Siedle-Classic door station
CL 111 uses the fixtures of the flush
mount housing. Adapter solutions
with FTL 101-.. to FTL 103-... in 6+n
technology can also be replaced by
Siedle Classic CL 111-... .
Wire-saving systems with TL 005 or
ZTL 056/057 can only be replaced by
a complete new installation.
Electrical voltage
Electrical devices may only be
installed, mounted and serviced
by suitably qualified electricians.
No external voltages greater
than 50 V are admissible inside
the flush mount housing of the
door station in compliance with
DIN VIDE 0100 / END 60065.
Exchanging the door station
The door station CL 111-... can be
used retaining the apartment call
station and the installation in the fol-
lowing systems:
• Replacement by CL 111-... R
(R stands for reverse compatible)
systems in 6+n technology with
apartment call stations LN
7150/0,
LN 7152.., HT 111-02, HT 211-02,
HT 311-0, HT 351-0, HT 411-02,
HT 511-0.., HT 611-01.
Line rectifiers used LN 8001a/
0,5, NG 101-..., NG 102-..,
NG 103-.., NG 401-.., NG 402-..
• Replacement by CL 111-.. F
Legende
B = In-Home-Bus
CL = Abkürzung für
Classic
ERT = Etagenruftaste
F = Tür-Freisprech
einrichtung
FTL = Frontplatte
Türlautsprecher
HT = Haustelefon
LN = Listennummer
N = 1+n System
NG = Netzgerät
PVZ = Post Verstärker
Zentrale
RC Glied = Kombination aus
Wiederstand und
Kondensator
THT = Transistor
Haustelefon
TL = Türlautsprecher
TLM = Türlautsprecher-
modul
TLM/TK = Türlautsprecher-
modul Telekommu-
nikation
TÖ = Türöffner
UP = Unterputz

Chat with your Siedle Classic CL 111 manual using AI

Get instant AI answers from your Siedle Classic CL 111 manual

Ask anything about the Siedle Classic CL 111. Answers come from this manual, with the pages they are based on.

Classic CL 111 Maintenance Schedule

Regular
Clean metal parts with non-abrasive cleaner

Apply a commercially available non-abrasive metal care product with a cloth or chamois leather. Wipe off completely to avoid stains.

As needed
Replace name plate labels

Unscrew the call button screws, remove the name plate, inscribe the name as required, and reinstall.

M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend Classic CL 111?

Yes No

Frequently Asked Questions

A

No, electrical installation and service must only be performed by a qualified electrician to comply with safety standards like DIN VDE 0100.

Is this answer helpful?

A

Yes, the CL 111 is designed to use the fixtures of the existing flush-mount housing from Portavox units made between 1968 and 1988.

Is this answer helpful?

A

The R models are reverse compatible for standard 6+n systems, while the F models support hands-free duplex intercom systems with THT stations.

Is this answer helpful?

A

Use a non-abrasive metal cleaner on the aluminum parts with a cloth. Do not use this on plastic nameplates as it can cause milky discoloration.

Is this answer helpful?

A

In some cases, yes. If there are no reserve wires, the existing rectifier LN 8001a may need to be exchanged for NG 402-03.

Is this answer helpful?

A

Yes, the call button can be unscrewed to remove the nameplate for custom inscription or professional re-lettering via Siedle service.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Directly replaces Portavox units from 1968-1988 without changing the flush mount housing
  • Compatible with a wide variety of existing apartment call stations and power supplies
  • Includes integrated button lighting for enhanced nighttime visibility
  • Easy volume adjustment controls located on the back of the unit
  • Modular design allows for easy replacement of internal function modules
VS

Disadvantages

  • Requires a qualified electrician for safe installation and servicing
  • Wire-saving systems like TL 005 cannot be replaced and need full reinstallation
  • Plastic nameplates are sensitive to metal cleaning agents and may discolor
  • Specific power supply upgrades may be needed depending on the existing setup
  • Terminal 11 from old units remains unused and must be left free
M: QW-35-FL

Product Specification

Display

N/​A

Image Sensor

N/​A

Detection Range

N/​A

Protection Class

IP54

Package Contents

1x Outdoor Unit

M: QW-35-FL

Product Description

Upgrade Your Entryway with the Siedle Door Communication System Classic CL 111

The Siedle Door Communication System Classic CL 111 represents a seamless evolution in residential security and communication. Designed specifically to replace legacy Portavox units manufactured between 1968 and 1988, this system allows homeowners to modernize their entry experience without the need for extensive rewiring or structural changes. The CL 111 series is engineered to fit into existing flush-mounted housings, preserving the original aesthetic of your building while introducing superior functionality.

This product line includes versatile models such as the CL 111-1R through CL 111-5R for standard reverse-compatible systems and the CL 111-1F through CL 111-5F for hands-free duplex intercom setups. Whether you are upgrading a simple 6+n technology network or a complex PVZ amplifier system, the Siedle Classic CL 111 ensures compatibility with a wide range of apartment call stations and power supplies. The front panel features integrated lighting for the call buttons, ensuring visibility during night hours, and maintains the classic aluminum finish that has defined Siedle quality for decades.

Installation is straightforward for qualified electricians, utilizing the same mounting fixtures as the older units. The system supports various configurations, from single-button setups to multi-button arrangements with pre-wired terminals for added convenience. Users can easily adjust volume levels for both the loudspeaker and microphone to prevent feedback and ensure clear conversations. The scope of delivery includes all necessary tools, such as Allen keys and screwdrivers, along with an RC element for specific installation scenarios where reserve wires are unavailable.

Maintaining your Siedle system is simple with regular cleaning using non-abrasive metal care products. It is important to avoid applying these cleaners to plastic parts like nameplates to prevent milky discoloration. For those needing personalized touches, nameplate lettering can be customized via the Siedle service. This robust door station combines timeless design with reliable performance, making it an ideal choice for updating older installations efficiently.

Important Notes

  • Always disconnect power before beginning any installation or maintenance work.
  • Ensure no external voltages greater than 50 V are present inside the housing.
  • Plastic components must not be cleaned with metal polishing agents.
  • Verify the correct mounting position when inserting new modules.
M: QW-35-FL

© Copyright 2026 Manual.ly