Shelly Flood Manual
PDF manual · 2 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Shelly Flood manual using AI
Get instant AI answers from your Shelly Flood manual
Ask anything about the Shelly Flood. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend Flood?
Yes NoFrequently Asked Questions
It can last up to 18 months using a CR123A battery. This depends on usage settings like wake thresholds and WiFi signal strength. Lower power settings extend the life significantly. It consumes less than five microamperes when idle.
Is this answer helpful?
Press and hold the button for 10 seconds. The LED will flash slowly to confirm the reset. This restores all settings to default. Ensure you have your network details ready for reconnection.
Is this answer helpful?
Yes, All Shelly devices are compatible with Amazon Alexa and Google Assistant. You need to follow the compatibility guides on their cloud website to link the account. Voice control allows you to check status easily.
Is this answer helpful?
The working temperature range is from minus 40 to 60 degrees Celsius. Measurement accuracy is within plus or minus one degree Celsius. It is suitable for various climates and indoor environments.
Is this answer helpful?
Twist the case counter clockwise to open it. Press the button to activate. Connect to the WiFi network created by the device. Configure via the mobile app or web browser. Follow the step-by-step wizard for setup.
Is this answer helpful?
Yes, you can use the mute setting in the sensor settings menu. This disables the sound alarm while keeping notification features active. It is useful if the sound is too intrusive in quiet areas.
Is this answer helpful?
Outdoors it reaches up to 30 meters. Indoors it reaches up to 15 meters. Ensure the router is nearby for best performance. Signal strength is displayed in the device information section of the app.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Up to 18 months battery life on a single CR123A charge
- Compatible with Amazon Alexa and Google Assistant for voice control
- Wide temperature measurement range from minus 40 to 60 degrees Celsius
- Offers custom alarm modes including alarm and rain settings
- Accessible via web interface without needing the mobile app
Disadvantages
- Indoor WiFi range limited to approximately fifteen meters
- Requires standard batteries which may need periodic replacement
- Setup process requires stable internet connection for initial pairing
- LED indicator behavior can be confusing for first time users
- Static IP address setup is not automatic and requires manual config
Product Specification
Type
Sensor
Standard
Wi-Fi (802.11b/g/n)
Function
Flood sensor, Warning function
Topology
Star
Dimensions
Ø2.76 x 0.75 in
Features
battery-powered (1x CR123A), siren, app-controlled (Android, iOS)
Product Description
Protect Your Home with Shelly Flood WLAN Water Sensor
The Shelly Flood WLAN Water Sensor stands as a critical component for modern smart homes. It detects liquid leakage and monitors environmental temperature simultaneously. This battery-powered device ensures peace of mind by alerting owners to potential water damage before harm occurs. It is built to withstand various environmental conditions with a working temperature range from minus forty to sixty degrees Celsius.
Long Lasting Performance
One of the standout features is its impressive battery life. Using a CR123A battery, users can expect up to eighteen months of operation on a single charge. This low power consumption makes it ideal for areas where frequent battery replacement is impractical. Its static electrical consumption is less than five microamperes, ensuring minimal drain when idle. This efficiency supports reliable monitoring without constant maintenance.
Seamless Connectivity
Connectivity is handled via WiFi 802.11 b/g/n. The operational range reaches up to fifteen meters indoors and thirty meters outdoors. It integrates effortlessly with home automation systems. You can control devices using voice commands through Alexa or Google Assistant. The device works as a standalone unit or pairs with a home automation controller. You can access the embedded web interface through any browser without installing extra software.
Easy Installation
Setting up the sensor is straightforward. Users can configure it via the Shelly Cloud mobile application or the embedded web interface. The setup wizard guides you through creating a new room and naming the device. You can define temperature thresholds to wake the sensor up and send status updates. The LED indicators provide visual feedback during the setup process. A flashing slow light means access point mode while a quick flash indicates station mode.
Customizable Alerts
The device offers flexible alarm modes. In alarm mode, it activates a sound alarm every five minutes upon detecting leakage. Rain mode sends a single notification until the threat clears. You can also mute the sound if needed. Security features allow restricting internet access or limiting login to the web interface. You can also control the device via HTTP from any other device on the network.
Maintenance and Safety
To reset the device to factory settings, press and hold the button for ten seconds. Always use certified batteries to prevent damage to the housing. Do not allow children to play with the device or the power button. Keep control devices away from young users to prevent accidental triggers. Regular firmware updates are available through the interface to enhance performance.
Conclusion
This sensor is a reliable choice for water and temperature monitoring. It complies with EU standards for safety and electromagnetic compatibility. Whether placed near washing machines or basements, it keeps you informed. The robust design ensures it survives in most indoor environments without failure. Manage your home safety efficiently with these tools.
Search for 67,706 Manuals online
Type-in Brand or Model