Manual.ly Logo

Shelly EM Manual

3.0 · 2 Ratings

PDF manual · 2 Pages

English

M: OA-GPT-5-NAN
page

/ 2

Loading...
4224-shelly-em-manual page 1
USER GUIDE
2 Channel WiFi Energy Meter
LEGEND:
N - Neutral input (110-230V AC);
L - Line input (110-230V AC);
O - Output for contactor control (max 2A);
P1+ - Positive connection of current transformer 1
P1- - Negative connection of current transformer 1
P2+ - Positive connection of current transformer 2
P2- - Negative connection of current transformer 2
The Dual WiFi Energy Meter, Shelly® EM by Allterco Robotics
is intended to be mounted into a standard in-wall console or
next to the breakers, in order to monitor the electric power
through it, independent for each channel and heavy-duty con-
tactor control. Shelly may work as a standalone Device or as
an accessory to a home automation controller.
• Purpose of control: Operating
• Construction of control: Independently mounted
• Type 1.B Action
• Pollution Degree 2
• Impulse Voltage: 4000 V
Power supply:
110-230V ±10% 50/60Hz AC
Max measurement per channel:
120A/230V
Relay Max Load:
2A/230V
Complies with EU standards:
- RE Directive 2014/53/EU
- LVD 2014/35/EU
- EMC 2004/108/WE
- RoHS2 2011/65/UE
Working temperature:
– 40°C up to 40°C
Radio signal power:
1mW
Radio protocol:
WiFi 802.11 b/g/n
Frequency:
2400 – 2500 MHz;
Operational range (depending on local construction):
- up to 50 m outdoors
- up to 30 m indoors
Dimensions(HxWxL):
39 x 36 x 17 mm
Electrical consumption:
< 1 W
Technical Information
• Control through WiFi from a mobile phone, PC, automation
system or any other Device supporting HTTP and/or UDP
protocol.
• Microprocessor management.
CAUTION! Danger of electrocution. Mounting the Device
to the power grid has to be performed with caution.
CAUTION! Do not allow children to play with the button/
switch connected the Device. Keep the Devices for remote
control of Shelly (mobile phones, tablets, PCs) away from
children.
Introduction to Shelly
®
Shelly
®
is a family of innovative Devices, which allow remote
control of electric appli-ances through mobile phone, PC or
home automation system. Shelly
®
uses WiFi to connect to
the devices controlling it. They can be in the same WiFi net-
work or they can use remote access (through the Internet).
Shelly
®
may work standalone, without being managed by a
home automation controller, in the local WiFi network, as well
as through a cloud service, from everywhere the User has
Internet access.
Shelly
®
has an integrated web server, through which the User
may adjust, control and monitor the Device. Shelly
®
has two
WiFi modes - access Point (AP) and Client mode (CM). To
operate in Client Mode, a WiFi router must be located within
the range of the Device. Shelly
®
devices can communicate
directly with other WiFi devices through HTTP protocol.
An API can be provided by the Manufacturer. Shelly
®
devices
may be available for monitor and control even if the User is
outside the range of the local WiFi network, as long as the
WiFi router is connected to the Internet. The cloud function
could be used, which is activated through the web server of
the Device or through the settings in the Shelly Cloud mobile
application.
The User can register and access Shelly Cloud, using either
Android or iOS mobile applications, or any internet browser
and the web site:
https://my.Shelly.cloud/.
Installation Instructions
CAUTION! Danger of electrocution! The mounting/ in-
stallation of the Device should be done by a qualied person
(electrician).
CAUTION! Danger of electrocution! Do not connect the
current transformer clamp to the Line, before wiring it to
Shelly EM. Even if only the current transformer is connected,
there might be high voltage accross its connection cables.
CAUTION! Danger of electrocution. Even when the Device
is turned off, it is possible to have voltage across its clamps.
Every change in the connection of the clamps has to be done
after ensuring all local power is powered off/disconnected.
CAUTION! Do not connect the Device to appliances ex-
ceeding the given max load!
CAUTION! Connect the Device only in the way shown in
these instructions. Any other method could cause damage
and/or injury.
CAUTION! Before beginning the installation please read
the accompanying documentation carefully and completely.
Failure to follow recommended procedures could lead to mal-
function, danger to your life or violation of the law. Allterco
Robotics is not responsible for any loss or damage in case of
incorrect installation or operation of this Device.
CAUTION! Use the Device only with power grid and ap-
pliances which comply with all applicable regulations. short
circuit in the power grid or any appliance connected to the
Device may damage the Device.
RECOMMENDATION: Тhe Device may be connected to
and may control electric circuits and appliances only if they
comply with the respective standards and safety norms.
Initial Inclusion
Initial Inclusion
Before installing/mounting the Device ensure that the grid is
powered off (turned down breakers).
Connect Shelly EM to the power grid and install it in the con-
sole following the scheme that suites the desired purpose.
You may choose if you want to use Shelly with the Shelly
Cloud mobile application and Shelly Cloud service. You can
also familiarize yourself with the instructions for Manage-
ment and Control through the embedded Web interface.
Control your home with your voice
All Shelly devices are compatible with Amazon Echo and
Google Home.
Please see our step-by-step guide on:
https://shelly.cloud/compatibility/Alexa
https://shelly.cloud/compatibility/Assistant
MOBILE APPLICATION FOR
MANAGMENT OF SHELLY
®
Shelly Cloud gives you opportunity to control and adjust all
Shelly
®
Devices from anywhere in the world.
You only need an internet connection and our mobile applica-
tion, installed on your smartphone or tablet.
To install the application please visit Google Play (Android - g.
3) or App Store (iOS - g. 4) and install the Shelly Cloud app.
Registration
The rst time you load the Shelly Cloud mobile app, you have to
create an account which can manage all your Shelly
®
devices.
Forgotten Password
In case you forget or lose your password, just enter the e-mail
address you have used in your registration. You will then re-
ceive instructions to change your password.
WARNING! Be careful when you type your e-mail address
during the registration, as it will be used in case you forget
your password.
After registering, create your rst room (or rooms), where you
are going to add and use your Shelly devices.
Shelly Cloud gives you opportunity to create scenes for auto-
matic turning on or off of the Devices at predened hours or
based on other parameters like temperature, humidity, light
etc. (with available sensor in Shelly Cloud).
Shelly Cloud allows easy control and monitoring using a mo-
bile phone, tablet or PC.
Device Inclusion
To add a new Shelly device, install it to the power grid fol-
lowing the Installation Instructions included with the Device.
Step 1
After the installation of Shelly in the console behind the pow-
er socket/light switch and the power is turned on Shelly will
create its own WiFi Access Point (AP).
WARNING: In case the Device has not created its own WiFi
network with SSID like shellyem-35FA58 check if you have
connected Shelly correctly by the schemes described above.
If you do not see an active WiFi network with SSID like shelly-
em-35FA58, reset the Device. In order to reset the device,
you will need physical access to it. On the back of the device,
you will see a button. Press and hold it for 10 seconds. Shelly
should return to AP Mode. If not, please repeat or contact our
customer support at:
support@Shelly.cloud
Step 2
Choose “Add Device”.
In order to add more Devices later, use the app menu at the
top right corner of the main screen and click “Add Device”.
Type the name (SSID) and password for the WiFi network, to
which you want to add the Device.
Step 3
If using iOS: you will see the following screen:
Press the home button of your iPhone/iPad/iPod. Open
Settings > WiFi and connect to the WiFi network created by
Shelly, e.g. shellysem-35FA58.
If using Android: your phone/tablet will automatically scan
and include all new Shelly Devices in the WiFi network that
you are connected to.
Upon successful Device Inclusion to the WiFi network you will
see the following pop-up:
Step 4:
Approximately 30 seconds after discovery of any new Devic-
es оn the local WiFi network, а list will be displayed by default
in the “Discovered Devices” room.
Specication
120A 50A
N
L
NOLP2-P2+P1-P1+
g. 3 g. 4

Chat with your Shelly EM manual using AI

Get instant AI answers from your Shelly EM manual

Ask anything about the Shelly EM. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend EM?

Yes No
0
User Pic

sowen32

8 months ago

My clamp sensors show different current values even when I use the same phase. Shouldn't the readings match if only one load is connected?

0
User Pic

Manual.ly

8 months ago

The readings should match only if the clamps are measuring the exact same conductor carrying the same current. If the current clamps are not centered or fully closed around the conductor, or if one clamp is on a different wire (or includes multiple conductors), values can differ. Also make sure the clamp is firmly installed in the same orientation each time and that no other consumers are sharing the measured cable segment. For troubleshooting, verify you used the correct current sensors (they are often sold separately) and that you installed them on the power cable for the room and the specific outlet/device you want to compare. If everything is installed correctly, check the app for firmware updates and run any available calibration or sensor check.

M: OA-GPT-5-NAN
M: OA-GPT-5-NAN

Video Manual

Energy monitoring with Shelly EM and Home Assistant

Frequently Asked Questions

A

Shelly EM measures true (active) power, reactive power (VAR), power factor and voltage. It supports two independent channels, each with current measurement up to 120A at 230V, and provides historical consumption graphs.

Is this answer helpful?

A

After safe installation and powering the device, it creates a WiFi Access Point (SSID like shellyem-XXXX). Connect your phone to that AP or open 192.168.33.1 in a browser to access the web UI, or use the Shelly Cloud app to add the device and join your home WiFi (Client mode).

Is this answer helpful?

A

No. The Shelly EM relay is rated to 2A/230V and is meant to control contactors or low-current devices. Use an appropriately rated contactor or relay for switching heavy loads.

Is this answer helpful?

A

Installation involves live mains and CT connections and should be performed by a qualified electrician. The manual warns against connecting CTs to live conductors and stresses powering off local circuits before wiring to avoid electrocution and device damage.

Is this answer helpful?

A

Yes. Shelly EM integrates with Shelly Cloud for remote access and supports Amazon Alexa and Google Assistant for voice control. It also offers local control via HTTP/UDP and developer protocols like MQTT or CoAP.

Is this answer helpful?

A

Firmware updates are available through the web interface or Shelly Cloud. You can restrict web UI access with a username and password, enable or disable cloud connectivity, and configure WiFi backup networks for resilience.

Is this answer helpful?

A

Always wire CTs per the manual, never clamp CTs on live conductors before connecting to Shelly EM, and ensure CT polarity (P+/P-) is correct. CTs produce high voltages when open-circuited; never leave secondary open while energized.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Two independent channels with per-channel measurements up to 120A, ideal for split-circuit monitoring.
  • WiFi connectivity with embedded web server, Shelly Cloud support, and compatibility with Alexa/Google Assistant.
  • Detailed telemetry: real power, reactive power, power factor, voltage and yearly history graphs.
  • Supports developer protocols (MQTT, CoAP, HTTP/UDP) and firmware updates for integrations and future features.
  • Compact DIN-friendly form factor with low device consumption (<1W) for seamless panel installation.
VS

Disadvantages

  • Relay limited to 2A — requires external contactor for high-current switching.
  • Installation must be performed by a qualified electrician due to risk of electrocution.
  • CT clamps must never be connected to live lines; improper wiring can damage device or create hazards.
  • 2.4 GHz WiFi only; no 5 GHz support may limit network placement in congested environments.
  • Indoor WiFi range can be limited (~30m), potentially requiring network planning or extenders.
M: OA-GPT-5-NAN

Product Specification

Type

Sensor

Standard

WLAN (802.11b/g/n)

Function

Current measurement function

Topology

Bus/Star

Dimensions

1.54x1.42x0.67 in

Special features

App controllable (Android, iOS)

Note

Please note the type (50A/120A) and number of current clamps.

M: OA-GPT-54-NAN

Product Description

Shelly EM WiFi Energy Meter 2-Channel Current Sensing Sensor Manual

The Shelly EM is a compact, two-channel WiFi energy meter designed for in-panel installation to monitor and control electrical consumption per channel. It measures up to 120A per channel, supports current transformers, and provides a 2A relay output for controlling contactors or loads. Powered from 110–230V AC, the device uses WiFi 802.11 b/g/n (2.4 GHz) to communicate with mobile apps, browsers or automation systems via HTTP/UDP, and can operate in Access Point or Client mode.

With a built-in web server and cloud integration through Shelly Cloud, the Shelly EM offers real-time readings—consumption (W), voltage (V), reactive power (VAR) and power factor—plus historical graphs spanning up to a year. The meter can show exported solar generation as negative consumption (green), and helps track true power (billing energy) and reactive power (non-billable). It supports advanced connectivity options including MQTT and CoAP for developer use.

Installation requires a qualified electrician: connect neutral and line inputs, attach current transformers (P1+/P1-, P2+/P2-), and mount the device in a breaker console. The unit creates its own AP on first power-up for setup or can join an existing WiFi network. Safety cautions stress powering down mains before wiring, avoiding connection of CT clamps to live lines, and respecting the maximum load ratings.

The Shelly EM’s mobile and embedded web interfaces allow naming devices, assigning rooms, viewing live metrics, and configuring schedules, timers, and automation scenes. Timers include Auto ON/OFF with second-level precision; Weekly Schedule supports sunrise/sunset-based actions when internet-connected. Security features include optional cloud access, login restriction with username/password, and backup WiFi configuration for failover.

Device settings cover power-on default state (ON, OFF, Restore Last), current transformer type, timezone/geo-location, SNTP server, firmware updates, and factory reset. The Details page displays per-channel consumption, power factor, voltage and a history graph; device info exposes IP, signal strength, and unique device ID. Shelly EM integrates with Amazon Alexa and Google Assistant for voice control when used through the cloud or local integrations.

Notes:

  • Rated measurement: 120A per channel; relay max load 2A/230V.
  • Radio range varies: up to ~50m outdoors and ~30m indoors, depending on construction.
  • Electrical consumption of the device is <1W.
  • Follow all safety warnings; incorrect installation may cause damage or injury.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly