Manual.ly Logo

Shelly 1PM Manual

5.0 · 11 Ratings

PDF manual · 2 Pages

English

M: QW-35-FL
page

/ 2

Loading...
8ead70febb77a5bdfa479f463c802f52c91f page 1
USER GUIDE
WiFi Relay Switch with power
metering
fig. 1
LEGEND:
N - Neutral input (Zero)/(
+
)
L - Line input (110-240V)/(
-
)
O - Output
I - Input
SW - Switch (input) controlling O
Power supply:
• 110-240V ±10% 50/60Hz AC
• 24-60V DC
Max load:
16A/240V
Complies with EU standards:
• RE Directive 2014/53/EU
• LVD 2014/35/EU
• EMC 2004/108/WE
• RoHS2 2011/65/UE
Working temperature:
– 40°C up to 40°C
Radio signal power:
1mW
Radio protocol:
WiFi 802.11 b/g/n
Frequency:
2400 – 2500 MHz;
Operational range (depending on local construction):
• up to 50 m outdoors
• up to 30 m indoors
Dimensions (HxWxL):
41 x 36 x 17 mm
Electrical consumption:
< 1 W
The WiFi Relay Switch Shelly
®
1 may control 1 electrical cir-
cuit up to 3.5 kW. It is intended to be mounted into a standard
in-wall console, behind power sockets and light switches or
other places with limited space. Shelly may work as a stan-
dalone Device or as an accessory to another home automa-
tion controller.
• Purpose of control: Operating
• Construction of control: Independently mounted
• Type 1.B Action
• Pollution Degree 2
• Impulse Voltage: 4000 V
• Indication of proper terminal connection
Technical Information
• Control through WiFi from a mobile phone, PC, automa-
tion system or any other Device supporting HTTP and/or
UDP protocol.
• Microprocessor management.
• Controlled elements: 1 electrical circuits/appliances.
• Controlling elements: 1 relays.
• Shelly may be controlled by an external button/switch.
• Shelly may monitor the power consumption and save it,
free on our Cloud, with history up to 1 year.
CAUTION! Danger of electrocution. Mounting the
Device to the power grid has to be performed with
caution.
CAUTION! Do not allow children to play with the
button/switch connected the Device. Keep the De-
vices for remote control of Shelly (mobile phones,
tablets, PCs) away from children.
Introduction to Shelly
®
Shelly
®
is a family of innovative Devices, which allow remote
control of electric appliances through mobile phone, PC or
home automation system. Shelly
®
uses WiFi to connect to
the devices controlling it. They can be in the same WiFi net-
work or they can use remote access (through the Internet).
Shelly
®
may work standalone, without being managed by a
home automation controller, in the local WiFi network, as well
as through a cloud service, from everywhere the User has
Internet access.
Shelly
®
has an integrated web server, through which the User
may adjust, control and monitor the Device. Shelly
®
has two
WiFi modes - access Point (AP) and Client mode (CM). To
operate in Client Mode, a WiFi router must be located within
the range of the Device. Shelly
®
devices can communicate
directly with other WiFi devices through HTTP protocol.
An API can be provided by the Manufacturer. Shelly
®
devices
may be available for monitor and control even if the User is
outside the range of the local WiFi network, as long as the
WiFi router is connected to the Internet. The cloud function
could be used, which is activated through the web server of
the Device or through the settings in the Shelly Cloud mobile
application.
The User can register and access Shelly Cloud, using either
Android or iOS mobile applications, or any internet browser
and the web site: https://my.Shelly.cloud/.
Installation Instructions
CAUTION! Danger of electrocution. The mounting/
installation of the Device should be done by a qual-
ied person (electrician).
CAUTION! Danger of electrocution. Even when the
Device is turned off, it is possible to have voltage
across its clamps. Every change in the connection
of the clamps has to be done after ensuring all local power
is powered off/disconnected.
CAUTION! Do not connect the Device to appliances
exceeding the given max load!
CAUTION! Connect the Device only in the way
shown in these instructions. Any other method
could cause damage and/or injury.
CAUTION! Before beginning the installation please
read the accompanying documentation carefully
and completely. Failure to follow recommended
procedures could lead to malfunction, danger to your life or
violation of the law. Allterco Robotics is not responsible for
any loss or damage in case of incorrect installation or oper-
ation of this Device.
CAUTION! Use the Device only with power grid and
appliances which comply with all applicable regu-
lations. short circuit in the power grid or any appli-
ance connected to the Device may damage the Device.
RECOMMENDATION: Тhe Device may be connect-
ed to and may control electric circuits and appli-
ances only if they comply with the respective
standards and safety norms.
RECOMMENDATION: The Device may be connect-
ed with solid single-core cables with increased
heat resistance to insulation not less than PVC
T105°C.
Initial Inclusion
Before installing/mounting the Device ensure that the grid is
powered off (turned down breakers).
Connect the Relay to the power grid and install it in the con-
sole behind the switch/power socket following the scheme
that suites the desired purpose:
1. Connecting to the power grid with power supply 110-240V
AC - g. 1
2. Connecting to the power grid with power supply 24-60V
DC - g. 2
For more information about the Bridge, please visit:
http://shelly-api-docs.shelly.cloud/#shelly-family-overview
or contact us at: developers@shelly.cloud
You may choose if you want to use Shelly with the Shelly
Cloud mobile application and Shelly Cloud service. You can
also familiarize yourself with the instructions for Manage-
ment and Control through the embedded Web interface.
Control your home with your voice
All Shelly devices are compatible with Amazon Echo and
Google Home.
Please see our step-by-step guide on:
https://shelly.cloud/compatibility/Alexa
https://shelly.cloud/compatibility/Assistant
MOBILE APPLICATION FOR
MANAGMENT OF SHELLY
®
Shelly Cloud gives you opportunity to control and adjust all
Shelly
®
Devices from anywhere in the world.
You only need an internet connection and our mobile appli-
cation, installed on your smartphone or tablet.
To install the application please visit Google Play (Android - g.
3) or App Store (iOS - g. 4) and install the Shelly Cloud app.
Registration
The rst time you load the Shelly Cloud mobile app, you have to
create an account which can manage all your Shelly
®
devices.
Forgotten Password
In case you forget or lose your password, just enter the e-mail
address you have used in your registration. You will then re-
ceive instructions to change your password.
WARNING! Be careful when you type your e-mail
address during the registration, as it will be used in
case you forget your password.
First steps
After registering, create your rst room (or rooms), where you
are going to add and use your Shelly devices.
Shelly Cloud gives you opportunity to create scenes for auto-
matic turning on or off of the Devices at predened hours or
based on other parameters like temperature, humidity, light
etc. (with available sensor in Shelly Cloud).
Shelly Cloud allows easy control and monitoring using a mo-
bile phone, tablet or PC.
Device Inclusion
To add a new Shelly device, install it to the power grid fol-
lowing the Installation Instructions included with the Device.
Step 1
After the installation of Shelly following the Instalation In-
structions and the power is turned on, Shelly will create its
own WiFi Access Point (AP).
WARNING: In case the Device has not created its’
own AP WiFi network with SSID like shelly-
1pm-35FA58, please check if the Device is connected ac-
cordingly to the Instalation Instructions. If you still do not
see an active WiFi network with SSID like shelly1pm-35FA58,
or you want to add the Device to another Wi-Fi network, reset
the Device. If the Device has been powered on, you have to
restart by powering it off and on again. After turning the
power on, you have one minute to press 5 consecutive times
the button/switch connected SW. You have to hear the Relay
trigger itself. After the trigger sound, Shelly should return to
AP Mode. If not, please repeat or contact our customer sup-
port at: support@Shelly.cloud
Step 2
Choose “Add Device”.
In order to add more Devices later, use the app menu at the
top right corner of the main screen and click “Add Device”.
Type the name (SSID) and password for the WiFi network, to
which you want to add the Device.
Step 3
If using iOS: you will see the following screen:
Press the home button of your iPhone/iPad/iPod. Open
Settings > WiFi and connect to the WiFi network created by
Shelly, e.g. shelly1pm-35FA58.
If using Android: your phone/tablet will automatically scan
and include all new Shelly Devices in the WiFi network that
you are connected to.
Upon successful Device Inclusion to the WiFi network you will
see the following pop-up:
Specification
fig. 2
fig. 3 fig. 4
Power supply: 110-240V AC
Serial Port
N
L
O SW L1 L N
Power supply: 24-60V DC
O SW L1 L N
-
+
Serial Port

Chat with your Shelly 1PM manual using AI

Get instant AI answers from your Shelly 1PM manual

Ask anything about the Shelly 1PM. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend 1PM?

Yes No
0
User Pic

Adam Graham

6 months ago

Can I use this for power monitoring without a cloud account, and does it fit in small switch boxes like a standard Shelly 1PM?

0
User Pic

Manual.ly

6 months ago

Yes, the setup supports local control without mandatory cloud accounts. The device fits compactly in standard installation boxes. You can configure it via the local web interface using its IP address on your router. Energy metering functions are enabled for monitoring appliances immediately. Remote features are optional, ensuring full functionality within your local network infrastructure without external dependencies.

M: QW-35-FL
M: QW-35-FL

Frequently Asked Questions

A

Turn off the power supply and disconnect the grid from the breaker. Connect the relay to the power grid following the diagram in the user manual. Mount the device in the wall console behind the switch. Ensure all connections match the line and neutral terminals before powering on.

Is this answer helpful?

A

The device operates with 110-240V AC at 50/60Hz or 24-60V DC. The maximum load capacity is 16A at 240V. It complies with EU standards and handles impulse voltages up to 4000V.

Is this answer helpful?

A

Yes, All Shelly devices are compatible with Amazon Echo and Google Home. You can control the device using voice commands through these platforms after connecting them to your Shelly Cloud account.

Is this answer helpful?

A

If the device does not show the correct WiFi AP, power cycle it. Then press the connected switch button 5 consecutive times. Or reset the physical button for 10 seconds. This restores Access Point mode.

Is this answer helpful?

A

Yes, the Shelly device saves power consumption data free on the cloud with history available for up to one year. You can view this information via the Shelly Cloud mobile application.

Is this answer helpful?

A

The electrical consumption is less than 1W. This low overhead ensures the device adds minimal load to your electrical circuit while monitoring other appliances.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Real-time power consumption monitoring with cloud history up to 1 year
  • Compact size fits behind standard wall plates and sockets
  • Compatible with Amazon Echo and Google Home for voice control
  • Supports both Access Point and Client WiFi modes for flexibility
VS

Disadvantages

  • Requires existing 2.4GHz WiFi network connectivity to operate
  • Installation requires turning off power and careful terminal wiring
  • Maximum load limited to 16A which may suit only specific circuits
  • Reset process can be complex requiring specific button sequences
M: QW-35-FL

Product Specification

Type

Actuator

Standard

Wi-Fi (802.11b/g/n)

Function

Switching actuator (on/off), Current measurement function

Topology

Bus / Star

Dimensions

1.61x1.42x0.67 in

Features

Controllable via App (Android, iOS), Voice Assistant (Amazon Alexa, Google Assistant)

M: QW-35-FL

Product Description

Revolutionize Home Energy Control

Unlocking the potential of smart living begins with reliable hardware. The Shelly 1PM 1-Channel Flush-Mount Switching Actuator with Power Measurement Manual serves as your comprehensive resource for integrating advanced electrical management into your home. This sleek device is designed to fit flush-mounted walls, ensuring a seamless aesthetic while providing industrial-grade functionality.

Precise Power Monitoring

One of the standout capabilities of this unit is real-time energy tracking. It allows users to monitor consumption directly from their smartphone or PC. The integrated web server stores history for up to one year in the cloud. This data helps identify wasteful appliances and optimize electricity bills efficiently. With a max load of 16A at 240V, it handles various circuits safely.

Flexible Connectivity

Connectivity is a major strength. The device utilizes WiFi protocols 802.11 b/g/n for seamless communication. It operates in Access Point or Client mode, offering flexibility for different network setups. You can control the device locally or remotely via the internet. Furthermore, compatibility with Amazon Echo and Google Home enables voice commands for complete hands-free control.

Installation and Safety

Installation demands attention to safety standards. The device connects to power supplies ranging from 110-240V AC or 24-60V DC. It fits behind standard power sockets or light switches where space is limited. Users must ensure the power grid is disconnected before mounting to prevent hazards. The physical dimensions are compact at 41 x 36 x 17 mm.

Advanced Automation Features

Beyond simple on and off switches, this actuator offers timers and weekly schedules for enhanced convenience. You can set sunrise and sunset triggers that adjust lighting automatically based on location. Safety features include max power protection to cut power if limits are exceeded. Firmware updates are handled through the interface to keep features current.

Secure and Scalable System

Security is paramount in modern setups. You can restrict login access to the web interface with a unique username and password. The system scales easily by adding more devices to the Shelly Cloud app using their mobile application. This platform manages scenes and automation parameters like temperature or humidity integration. Enjoy peace of mind knowing your infrastructure supports robust security protocols.

By utilizing the Shelly 1PM 1-Channel Flush-Mount Switching Actuator with Power Measurement Manual, you gain access to a versatile ecosystem. Whether for DIY enthusiasts or professional integrators, this tool bridges the gap between traditional wiring and modern digital control. It empowers homeowners to take charge of their energy usage and device management effortlessly.

M: QW-35-FL

© Copyright 2026 Manual.ly