Shelly 1 Manual
PDF manual · 2 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Shelly 1 manual using AI
Get instant AI answers from your Shelly 1 manual
Ask anything about the Shelly 1. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend 1?
Yes NoFrequently Asked Questions
It controls one electrical circuit via a single integrated relay. The device is intended for switching one load (such as lighting or other appliances) that fits within the specified max load rating.
Is this answer helpful?
The device is available for different power supply variants: 110-240V AC +/-10% 50/60Hz, 24-60V DC, or 12V DC. Use the correct wiring scheme and variant for your installation.
Is this answer helpful?
After power-up, it creates an AP network. You connect your phone/tablet to that AP and then choose your home WiFi credentials. Alternatively, use Client Mode so it connects to your router after configuration.
Is this answer helpful?
Yes. The actuator includes an embedded web interface. If your phone, tablet, or PC is connected to the same WiFi network, you can configure, control, and monitor it in your browser.
Is this answer helpful?
Yes. You can use Auto OFF and Auto ON timers, weekly schedules, and sunrise/sunset automation. Sunrise and sunset features require internet access for accurate timing.
Is this answer helpful?
Yes. Shelly devices are compatible with Amazon Echo and Google Home, allowing you to switch the connected circuit using supported voice assistants.
Is this answer helpful?
The manual emphasizes the danger of electrocution and advises installation by a qualified person. Verify power is disconnected before wiring changes, and never connect loads exceeding the rated max load.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Flush-mounted design installs behind standard in-wall sockets or switches in tight spaces
- WiFi control with AP and Client Mode plus an embedded web interface for local management
- Automation support: schedules, Auto ON/OFF, and sunrise/sunset when internet is available
- Voice and cloud options: compatible with Amazon Echo and Google Home, plus Shelly Cloud remote access
Disadvantages
- Switching capacity is limited to one relay circuit (one output control path)
- Installation involves mains/low-voltage wiring and requires careful, qualified work
- Operational range depends on local construction and can be limited indoors
- Some features require internet access (for cloud control and time-based sunrise/sunset)
Product Specification
Type
Actuator
Standard
WLAN (802.11b/g/n)
Function
Switching actuator (on/off)
Topology
Bus/Star
Dimensions
1.61x1.42x0.67in
Special features
Controllable via app (Android, iOS)
Product Description
Shelly 1 WLAN Switch Actuator 1-Channel Flush-Mounted: smart, compact relay control
The Shelly 1 WLAN Switch Actuator 1-Channel Flush-Mounted brings WiFi switching to a standard in-wall console, so you can control one electrical circuit from your phone, PC, or home automation platform. Designed for “limited space” installations behind existing power sockets or light switches, it combines a relay, a built-in web server, and flexible WiFi connectivity in a small flush-mount body.
At a glance, this device supports 110-240V AC (110-240V +/-10% 50/60Hz) as well as low-voltage options (24-60V DC or 12V DC, depending on the model). The relay can switch up to a max load of 16A/240V, with electrical consumption under 1W. It operates reliably in temperatures from -40C to 40C and uses WiFi 802.11 b/g/n over 2.4-2.5 GHz.
Setup is built around two WiFi modes. In Access Point (AP) mode, Shelly creates its own network so you can include it quickly, while Client Mode (CM) connects it to your existing router. Once connected, you can manage the relay through the embedded web interface (for local control) or via Shelly Cloud (for remote control). For advanced integration, the system can be used with an API and supports control through HTTP and/or UDP.
Daily automation is a major strength. The relay offers configurable default behavior (ON, OFF, or restore last state), plus timers like Auto OFF and Auto ON. Schedules can run at fixed times, and sunrise/sunset automation is also available when the device has internet access. You can even trigger control using a connected external button/switch, with momentary, toggle, or edge-switch behavior.
This actuator also fits modern voice control workflows. All Shelly devices are compatible with Amazon Echo and Google Home, enabling hands-free switching.
Key results
- Flush-mount installation behind wall fixtures for clean, space-saving smart control
- Reliable single-circuit switching up to 16A/240V with low standby consumption (<1W)
- Local and cloud management via AP, Client Mode, embedded web interface, and Shelly Cloud
- Flexible automation: schedules, Auto ON/OFF, and sunrise/sunset (internet required)
Notes before you install
- High-voltage safety: installation should be done by a qualified electrician
- Do not exceed the rated max load and follow the provided wiring scheme
- If AP network is not visible, perform the inclusion/reset procedure described
Search for 67,706 Manuals online
Type-in Brand or Model
Luca Schneider
8 months ago
How difficult is the setup with WiFi and the Shelly app? What can I do if the device shows as connected but is not found in the app?
Manual.ly
8 months ago
Setup is usually straightforward with the Shelly app, but if the device does not appear even though your app/router reports it is connected, try these steps: (1) Ensure you are using 2.4 GHz WiFi (many setups do not work on 5 GHz). (2) Power-cycle the device and place it close to the router during setup. (3) Perform a proper factory reset (follow the reset duration from the device manual), then pair again in the Shelly app. (4) In the app, look for the device under the add/pair flow and make sure you are logged into the correct Shelly account. If it still cannot be found, check router settings (client isolation/VLAN restrictions) and try with a different smartphone. For persistent issues, contact support with your device model and app version.