sera X-Edge Manual
PDF manual · 56 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your sera X-Edge manual using AI
Get instant AI answers from your sera X-Edge manual
Ask anything about the sera X-Edge. Answers come from this manual, with the pages they are based on.
X-Edge Maintenance Schedule
Disconnect power. Clean the filter mat, basket and sponge under running water or preferably in discarded aquarium water; replace the mat if needed.
Remove the motor chamber cover and rotor, rinse the rotor and pump head under running water, then reassemble in reverse order.
Free maintenance reminders
Timed to your purchase date. Always free, unsubscribe anytime.
Ask a Question
Do you recommend X-Edge?
Yes NoFrequently Asked Questions
X-Edge 300 is intended for freshwater tanks up to ~100 L, X-Edge 450 for up to ~200 L and X-Edge 700 for up to ~300 L — capacity depends on stocking density and flow preferences.
Is this answer helpful?
No. The filter must be fully submerged during operation. Running it dry or with insufficient water flow can cause motor damage and void the warranty.
Is this answer helpful?
Clean the filter mat, sponge and basket every two weeks (use aquarium water for rinsing when possible). Service the running unit by removing and rinsing the rotor and pump head every three months.
Is this answer helpful?
Use the spray bar for a directed current and stronger surface movement; choose the duck-bill nozzle for a softer volumetric flow. The Air-Set can be combined with the duck-bill nozzle for added aeration.
Is this answer helpful?
Always unplug before maintenance, form a drip loop on the mains cable, keep the plug and socket dry, do not operate above 35°C, keep out of reach of children under 8, and ensure RCD protection on the circuit if possible.
Is this answer helpful?
sera offers a 2-year manufacturer warranty against material and workmanship defects. Exclusions include wear parts (filter media, rotor, suction cups), power cable damage, damage from misuse (dry-running), external impacts, and saltwater use.
Is this answer helpful?
First unplug and inspect the intake mat, sponge and rotor for debris. Clean components in aquarium water, verify correct assembly and seating of the mat (observe triangle mark), then reassemble and retest. Consult the full manual or sera.de for troubleshooting.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Pre-filled, easy to install corner design keeps aquarium layout tidy and unobtrusive.
- Low power consumption (4.2–8.5 W) with quiet motor thanks to noise damping and glass mounting.
- Adjustable flow options (spray bar, duck-bill, Air-Set) let you tune circulation to tank needs.
- Simple maintenance: tool-free removal, biweekly cleaning of mat/sponge and quarterly rotor service.
- Includes biological media (sera siporax mini Professional) for stable biological filtration out of box.
Disadvantages
- Must remain fully submerged; dry-running will damage motor and void warranty.
- Suction cups require clean glass to adhere; algae can prevent secure mounting.
- Air-Set only usable with duck-bill nozzle; air inlet must be closed otherwise.
- Power cable damage excluded from warranty and cannot be repaired by manufacturer.
- Not suitable for marine use and warranty void if used in saltwater.
Product Specification
Type
Internal filter
Suitability
Freshwater, Aquatics, Terraristics, Breeding tank
Filtration
1x Filter basket (Ceramic substrate, siporax mini Professional), 1x Sponge filter (coarse), 1x Filter fleece
Special features
Rotatable filter outlet, Suction cup mount
Manufacturer's warranty
two years
Product Description
sera X-Edge Unterschrank 100cm Manual
The sera X-Edge corner filter series (300 / 450 / 700) is a compact, energy-efficient internal aquarium filter designed to sit unobtrusively in a tank corner. Built for freshwater aquariums of varying sizes, the X-Edge combines mechanical and biological filter media with a quiet, low-maintenance motor to deliver clear water and stable biological conditions. Its corner-mounted design, suction-cup holder plate and interchangeable outlet fittings (spray bar, duck-bill nozzle, Air-Set) let you tailor flow patterns to tank layout and livestock needs.
Installation is straightforward: the unit ships pre-filled with filter media and is installed vertically in a cleaned aquarium corner, typically 2–3 cm below the surface for optimal gas exchange. The holder plate secures with four suction cups; ensure glass is free of algae for reliable adhesion. The filter head contains an adjustable flow knob and a pivoting outlet tube. Choose the spray bar for directed currents or the duck-bill nozzle for softer volumetric flow. The Air-Set is used only with the duck-bill nozzle; otherwise the air inlet must be closed.
Maintenance is simple and tool-free: biweekly cleaning involves removing the filter casing from the motor housing, replacing or rinsing the mat, sponge and media (use aquarium water when possible), and reassembling following the orientation marks. Every three months, the rotor and pump head should be rinsed to keep the running unit efficient. The design supports quick partial service or full disassembly for deep cleaning.
Safety and usage notes stress that the filter must always remain fully submerged to avoid dry-running and motor damage, operate only in freshwater indoor tanks, and not exceed 35°C. Keep the mains plug dry and form a drip loop on the cable; unplug before any maintenance and do not operate without filter media. Damaged power cords must be replaced by the manufacturer or qualified personnel. The product contains magnetic components—pacemaker users should observe device-specific safety distances.
Models and specs vary by capacity: the X-Edge 300 suits aquariums up to ~100 L with Qmax 300 l/h, the 450 up to ~200 L with Qmax 450 l/h, and the 700 up to ~300 L with Qmax 700 l/h. Power consumption is low (approx. 4.2–8.5 W) and the units are IPX8 rated for submersion. The kit includes the filter head, holder plate with suction cups, filter case, pre-filled filter basket (sera siporax mini Professional), sponge, mat/activated carbon insert, front cover, spray bar, duck-bill nozzle, Air-Set and user information.
Using the X-Edge correctly yields quiet, efficient filtration with easy access for routine maintenance, while observing safety and warranty exclusions protects performance and coverage.
Notes
- Unit ships pre-filled and ready to run; always check suction cup adhesion before powering.
- Close the air injector when not using Air-Set to prevent leaks.
- Warranty excludes wear parts, power cable damage, dry-running and misuse.
Search for 67,706 Manuals online
Type-in Brand or Model