Manual.ly Logo

Sekonic SpectroMaster C-800 Manual

0.0 · 0 Ratings

PDF manual · 217 Pages

English

M: OA-GPT-54-NAN
page

/ 217

Loading...
b8715c1f30e5b1ff12579f2edba821ad1cab page 5
iii
NOTICE
●
A protective sheet is attached to the LCD. Peel it off before use.
●
Although the LCD monitor is manufactured to very high standards, it is possible to
observe a few dead pixels on the screen. This is normal and not a malfunction of the
meter.
●
Do not use at altitudes above 2,000m (6,561 feet).
●
Our company shall not be liable for any data loss caused by, but not limited to, malicious
acts and control errors.
●
Be sure not to drop the meter or subject it to sudden impacts, as the meter will be
damaged.
●
Do not store the meter in areas of high temperature of high humidity, as the meter will be
damaged.
●
Be careful not to transport the meter from cold to warm moist conditions as condensation
will form on the meter and may damage it.
●
If the meter is operated in temperatures below -10°C, the response of the LCD will
greatly slow down and the display may be difcult to view and read. This will not harm
the meter. Also, if the temperature exceeds 50°C, the liquid crystal display will darken
and become difcult to read, but when it returns to room temperature it will return to its
normal condition.
●
If the meter is left in direct sunlight, a vehicle, or near a heater, the unit's temperature will
rise and may result in damage. Please be careful when using the meter in these types of
locations.
●
If the meter is left where corrosive gases may be generated, the gases may affect the
product and may result in damage. Please be careful when using the meter in these
types of locations.
●
In case of disposing the meter, follow the rules of disposal in your area.
Maintenance Notes
●
Be careful not to let the Light Receptor become dusty, dirty, or scratched as this may
affect the precision of the measurement.
●
If the meter becomes dirty, wipe it with a dry, soft cloth. Never use organic solvents such
as thinner or benzine.
NOTE
●
For used batteries, dispose of them according to the rules of your area.
●
Insulate plus and minus terminals with tape or other insulation material.
●
Do not disassemble the batteries.

Chat with your Sekonic SpectroMaster C-800 manual using AI

Get instant AI answers from your Sekonic SpectroMaster C-800 manual

Ask anything about the Sekonic SpectroMaster C-800. Answers come from this manual, with the pages they are based on.

SpectroMaster C-800 Maintenance Schedule

As needed
Clean the diffuser

Wipe the diffuser with a dry, soft cloth if dirty. Do not use organic solvents.

Show in the manual (page 96)
As needed
Clean the device exterior

Clean the device with a dry, soft cloth. Never use organic solvents like thinners or gasoline.

M: QW-35-FL

Ask a Question

0/1000

Do you recommend SpectroMaster C-800?

Yes No

Frequently Asked Questions

A

It is used to measure and analyze light quality for photography, video, film, and lighting design. It helps users evaluate color temperature, spectral output, and color rendering for more accurate lighting decisions.

Is this answer helpful?

A

It can measure daylight, tungsten, fluorescent, HMI, LED, and flash light. This wide compatibility makes it useful for both studio and location work.

Is this answer helpful?

A

No. It goes beyond brightness and measures color-related data such as CRI, SSI, TLCI, TLMF, TM-30-15, chromaticity, and filter correction values.

Is this answer helpful?

A

Dark calibration helps the meter stay accurate by resetting its sensor reference. It should be done before first use and whenever temperature conditions change significantly.

Is this answer helpful?

A

Yes. It includes memory functions that let users save measurements, recall them later, and compare current readings with stored reference values.

Is this answer helpful?

A

It is usable by beginners, but its full value is best for users who need advanced lighting analysis. The menu system and many measurement modes may take time to learn.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Measures many light types, including LED, flash, HMI, tungsten, and daylight.
  • Offers advanced metrics like CRI, SSI, TLCI, TM-30-15, and chromaticity data.
  • Touchscreen interface and multiple display modes improve workflow flexibility.
  • Memory and USB software support make it useful for saving and managing readings.
VS

Disadvantages

  • Requires dark calibration and careful setup for best accuracy.
  • Batteries and USB cable may not be included, adding extra cost.
  • Not water-resistant, so it needs protection on set or in transit.
  • Advanced features can feel complex for beginners or casual users.
M: OA-GPT-54-NAN

Product Specification

Type

Light Meter

M: OA-GPT-54-NAN

Product Description

Sekonic SpectroMaster C-800 Light Meter: Precision for Creative Lighting

The Sekonic SpectroMaster C-800 Light Meter Manual points to a tool built for professionals who need more than a basic exposure reading. The C-800 is a high-performance spectrometer designed for photography, video, and film work, giving creators a deeper look into how a light source behaves rather than simply how bright it is.

At its core, the C-800 measures a wide range of lighting types, including natural daylight, LED, HMI, fluorescent, tungsten, and flash. It covers the visible spectrum from 380 nm to 780 nm, making it a strong choice for anyone who cares about color accuracy and repeatable results. This is especially valuable when matching multiple fixtures on set or checking whether a lighting setup will render skin tones and materials naturally.

One of the strongest advantages of this device is its broad set of color-quality metrics. Along with familiar CRI readings, the C-800 also supports SSI, TLCI, TLMF, TM-30-15, chromaticity coordinates, color temperature, and filter compensation tools. That means users can evaluate not just brightness, but also spectral quality, color shift, and the practical corrections needed to reach a target white balance.

The touchscreen interface and multiple display modes make the meter flexible in real-world production. Users can switch between text views, spectrum graphs, comparison modes, multi-light analysis, and white-balance correction views. The ability to save measurements, recall reference values, and connect via USB for software support adds another layer of workflow convenience.

For creators working in fast-paced environments, the C-800 is also about control. It includes dark calibration, adjustable settings, battery monitoring, and memory functions that help keep measurements organized. The meter is best suited for experienced users who need reliable lighting data for studio work, broadcast, set design, or architectural lighting projects.

If you are looking for a tool that bridges exposure metering and advanced color analysis, the Sekonic SpectroMaster C-800 stands out as a serious professional solution.

Notes

  • Batteries and USB cable may need to be purchased separately.
  • Dark calibration is important for accurate readings.
  • The device is not water-resistant and should be handled carefully.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly