Manual.ly Logo

Seagate Exos X18 Manual

0.0 · 0 Ratings

PDF manual · 57 Pages

English

M: OA-GPT-5-NAN
page

/ 57

Loading...
cf7bc0c0a9d8273c23c3d2665b4bd78323c9 page 1
* Default configuration is 512E for 512E / 4KN drives.
See
Section 2.2.1 to Fast Format to 4KN in seconds
100865854, Rev. C
January 2021
X18 SATA Product Manual
512E* models
Standard
ST18000NM000J
ST16000NM000J
ST14000NM000J
ST12000NM000J
512E* models
Self-Encrypting
ST18000NM001J
ST16000NM001J
ST14000NM001J
ST12000NM001J

Chat with your Seagate Exos X18 manual using AI

Get instant AI answers from your Seagate Exos X18 manual

Ask anything about the Seagate Exos X18. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend Exos X18?

Yes No

Frequently Asked Questions

A

The Exos X18 series is available in 12TB, 14TB, 16TB, and 18TB capacities and uses a 7200 RPM spindle speed with a 256 MB cache to deliver sustained throughput suited for enterprise workloads.

Is this answer helpful?

A

Yes. Exos X18 ships defaulted to 512E but supports 4KN. The T13 SET SECTOR CONFIGURATION EXT command enables fast format conversion between 512E and 4KN; the change takes effect immediately upon command completion.

Is this answer helpful?

A

SED models implement AES-256 XTS hardware encryption with per-band keys, TCG Enterprise compliance, Trusted Send/Receive command support, cryptographic erase (key replacement), RevertSP via PSID, and authenticated firmware download to protect data at rest and secure firmware updates.

Is this answer helpful?

A

The drives target an Annualized Failure Rate of 0.35% (MTBF ~2.5M hours) under rated conditions and a maximum rated workload of <550 TB per year. Exceeding workload or operating outside specified environmental limits can degrade MTBF.

Is this answer helpful?

A

Yes. Exos X18 conforms to SATA 3.3, supports hot-plug operation, NCQ, multiple DMA and PIO modes, and standard SATA connectors and pinouts. Validate host/HBA compatibility for full feature support.

Is this answer helpful?

A

Seagate provides detailed DC power tables per capacity (12–18TB) covering idle, standby, startup, operating, and peak currents. PowerChoice extended power states allow trade-offs between power savings and recovery time—use these specs for PSU and cooling planning.

Is this answer helpful?

A

The drive supports S.M.A.R.T. (attributes, self-tests), Device Statistics logs, Identify Device data, and Seagate SeaTools diagnostics for drive self-tests and troubleshooting. S.M.A.R.T. is shipped disabled and requires host/BIOS support to enable.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Enterprise capacities (12–18TB) with 7200 RPM and 256 MB cache for high-density storage.
  • Supports 512E and 4KN with T13 Fast Format conversion for flexible sector handling.
  • Strong reliability targets (0.35% AFR, MTBF ~2.5M hours) and 600k load/unload cycles.
  • SED models offer AES-256 XTS encryption, per-band keys, cryptographic erase, and TCG compliance.
  • Comprehensive telemetry: S.M.A.R.T., Device Statistics log, Identify Device data for monitoring.
VS

Disadvantages

  • Mechanical HDDs have higher latency and lower IOPS compared to SSDs for random workloads.
  • Power and acoustic characteristics require data center cooling and power planning.
  • Workload limit (<550 TB/year) means heavy write workloads may reduce rated reliability.
  • SED feature use depends on host/TGG software support and proper password/PSID handling.
  • Physical bulk and mounting constraints compared with smaller form-factor drives or NVMe.
M: OA-GPT-5-NAN

Product Specification

Form Factor

3.5" (Width)

Interface

SATA 6Gb/s

Rotational Speed

7200 rpm

Cache

256MB

Recording Method

Conventional Magnetic Recording (CMR)

Reliability Forecast

2.5 million hours (MTBF)

Warranty

60 months

Attention/Note/Trivia

Note: Unmarked OEM/System Builder hard drives in circulation. Reduced warranty performance possible. Manufacturer's warranty verifiable via serial number.Important: For use within a RAID array, hard drives with different recording methods (CMR, SMR) should not be combined. When using hard drives with SMR in a RAID array, it must be ensured that the RAID controller (or the NAS system) is compatible with SMR hard drives, so that the partially blocked recording behavior of SMR is not falsely interpreted as a "hardware defect".

M: OA-GPT-54-NAN

Product Description

Seagate Exos X X18 HDD SATA Manual

The Seagate Exos X18 series delivers enterprise-grade SATA HDDs designed for demanding data center and server workloads. Available in 12TB, 14TB, 16TB, and 18TB capacities, these 3.5" drives spin at 7200 RPM and include a 256 MB cache to provide consistent throughput and low latency for mixed read/write applications. Built for scale, the Exos X18 emphasizes reliability, performance, and manageability for large-scale storage infrastructures.

Key product highlights

The Exos X18 supports high sustained transfer rates (up to ~258 MiB/s sustained and up to 600 MB/s burst via SATA signaling) and modern ATA features such as Native Command Queuing, T13 Fast Format sector conversion (512E <-> 4KN), and advanced error-correction algorithms. Drives ship defaulted to 512E but support quick conversion to 4K logical sectors using SET SECTOR CONFIGURATION EXT. PowerChoice power states allow system-level power/performance tuning for energy-efficient deployments.

Enterprise-focused reliability is core to the design: the drives carry an AFR target of 0.35% (MTBF ~2.5M hours) under rated conditions, a maximum rated workload of <550 TB/year, and support 600,000 load/unload cycles. Acoustic, shock, vibration, and environmental specs ensure rugged operation in data center environments with operating temperatures from 5°C to 60°C and broad humidity and altitude tolerances.

Security and manageability

Self-Encrypting Drive (SED) variants use AES-256 XTS hardware encryption with per-band keys and TCG-compliant controls for data-at-rest protection. SED models provide Trusted Send/Receive command support, cryptographic erase (instant key replacement), RevertSP using the PSID, and authenticated firmware download to maintain security posture. The drives also expose robust S.M.A.R.T. logging, Device Statistics and Identify Device logs for monitoring and diagnostics (SeaTools recommended for self-tests).

Installation and interface

Exos X18 drives utilize the SATA 3.3 interface with hot-plug support, standard SATA power and signal pinouts, and latching connector compatibility. Physical mounting follows SFF-8301/SFF-8323 dimensions; drives can be mounted in any orientation with specified screw limits and required clearances. Power profiles are provided per capacity (12–18TB) with detailed idle, standby, start, and peak currents for system design.

Notes:

  • Default logical sector format is 512E; fast format to 4KN is supported.
  • SED features require host support for TCG/Trusted commands to fully utilize access controls and cryptographic erase.
  • Validate HBA/RAID controller compatibility for full capacity and sector format support.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly