Seagate BarraCuda Manual
PDF manual · 23 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Seagate BarraCuda manual using AI
Get instant AI answers from your Seagate BarraCuda manual
Ask anything about the Seagate BarraCuda. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend BarraCuda?
Yes NoFrequently Asked Questions
The BarraCuda SATA SSD uses a 2.5-inch form factor and is fully compliant with SATA Revision 3.1 (up to 6.0 Gbps). It supports AHCI and is backward compatible with SATA 1.5 Gbps and 3.0 Gbps hosts.
Is this answer helpful?
Sequential performance is rated up to 540 MB/s read and up to 510 MB/s write, depending on capacity. Actual results vary with host hardware, firmware version, and workload; testing was measured with CrystalDiskMark on a SATA 6 Gb/s host.
Is this answer helpful?
Endurance is specified per capacity (e.g., 240 GB = 80 TBW; 3840 GB = 1200 TBW). The drive includes wear-leveling, over-provisioning, and LDPC ECC to extend life. Monitor SMART attributes (E7h) and replace the drive when Media Wear Indicator reaches end-of-life.
Is this answer helpful?
No. The BarraCuda SATA SSD does not guarantee protection against sudden power loss. Seagate recommends issuing the Standby Immediate command (0xE1h) before power removal to avoid data loss.
Is this answer helpful?
Officially supported operating systems include Windows 10 and Windows 11 (64-bit) and common Linux distributions (e.g., Ubuntu). Compatibility and performance may vary with OS, drivers, and host configuration.
Is this answer helpful?
Yes. The drive supports firmware upgrades to address compatibility, performance, or feature updates. Seagate provides firmware downloads and tools on its support website.
Is this answer helpful?
The product carries a three-year warranty or until the device reaches its host TBW limit, whichever occurs first. Warranty specifics and regional support information are available via Seagate support channels.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- High sequential read up to 540 MB/s and write up to 510 MB/s for responsive everyday performance.
- Wide capacity range (240 GB to 3840 GB) to suit consumer and workstation storage needs.
- Robust endurance features: LDPC ECC, wear leveling, bad-block management, and over-provisioning.
- SMART support and Media Wear Indicator for proactive health monitoring and lifetime tracking.
- Compact 2.5-inch, 7 mm form factor with broad SATA 3.1 compatibility and low-power modes (HIPM/DIPM).
Disadvantages
- No guaranteed protection against sudden power loss; requires Standby Immediate command before power removal.
- Performance and power figures vary by capacity and host platform; peak numbers are capacity-dependent.
- Three-year warranty may be shorter than some competitors' extended warranty offerings.
- Limited to SATA interface speeds—slower than NVMe PCIe SSD alternatives for high-end workloads.
- Write endurance (TBW) is finite; heavy sustained write workloads will shorten drive lifespan.
Product Specification
Form factor
Solid State Drive (SSD)
Form factor
2.5"
Interface
SATA 6Gb/s
Read
540MB/s
Memory modules
3D-NAND
Reliability estimate
1.8 Million hours (MTBF)
Protocol
AHCI
Dimensions
3.95x2.76x0.28in (without heatsink)
Warranty
36 Months
Product Description
Seagate BarraCuda SATA SSD — Reliable SATA Storage
The Seagate BarraCuda SATA SSD brings fast, dependable storage to everyday computing with a SATA 3.1 (6.0 Gbps) interface and broad capacity options from 240 GB up to 3,840 GB. Designed as a 2.5-inch SATA drive, it fits typical laptop and desktop bays and supports AHCI, NCQ, and SATA 1.5/3.0/6.0 Gbps compatibility for straightforward integration into existing systems.
Performance targets include sequential reads up to 540 MB/s and writes up to 510 MB/s (capacity-dependent). The drive uses 3D NAND and advanced firmware features—such as SLC caching, Predict-and-Fetch, and adaptive performance tuning—to maintain responsiveness across mixed workloads. It also implements TRIM support and native commands for efficient data management.
Endurance and reliability are emphasized through features like LDPC ECC for error correction, wear leveling, bad-block management, and over-provisioning. Endurance ratings (Total Bytes Written) vary by capacity — for example, 240 GB rated at 80 TBW up to 3,840 GB rated at 1,200 TBW — and the SSD’s MTBF is specified at 1.8 million hours. SMART support provides health monitoring and a Media Wear Indicator (SMART E7h) to help plan replacements before failures.
Power management includes HIPM and DIPM support and low-power states (Partial and Slumber) to reduce energy use in idle conditions. The drive lists nominal active power values (varies by capacity) and requires a controlled Standby Immediate command prior to power removal for best data protection since the unit does not guarantee protection against sudden power loss.
Mechanical and environmental specs make the BarraCuda SATA SSD suitable for mobile and desktop environments: a slim 7 mm max height, approximately 50 g weight, operating temperatures from 0°C to 70°C, and non-operating shock/vibration tolerances for handling and transport.
Additional conveniences include industry-standard SATA connector pinouts, full ATA-8/ACS-4 command compliance, SMART attribute reporting, and firmware upgradeability. The drive carries certifications such as CE, UL, FCC, RoHS and includes a three-year warranty (or until host TBW limit is reached).
Notes
- Compatible with Windows 10/11 (64-bit) and common Linux distributions; performance varies with host, firmware, and capacity.
- To avoid data loss, send the Standby Immediate (0xE1h) command before removing power; sudden power loss is not protected.
- Over-provisioning and SLC caching improve sustained performance and endurance.
Search for 67,706 Manuals online
Type-in Brand or Model