Manual.ly Logo

Schuberth E1 Manual

0.0 · 0 Ratings

PDF manual · 165 Pages

English

M: OA-GPT-54-NAN
page

/ 165

Loading...
39fed1872c797f037e7608528e5d749d0193 page 2b
82 83
EN
MOUNTING THE CHEEK PAD
1. Push the A.R.O.S. strap through
the neck strap channel as far as the
chinstrap padding opening.
2. From the outside, thread the chinstrap
through the cheek cushion and
through the A.R.O.S. strap and pull it
tight from the back.
3. Zip up the zipper.
4. Mount the cheek pad using the three
pins on the red plugs and sockets.
Ensure that the head strap
cushion’s plastic strap with the round
holes is inserted over the rear cheek
cushion pin.
5. Repeat points 1 to 4 to mount the
cheek pad on the other side.
6. Reinsert the neck collar by rst
inserting the guide pins into the front
plugs and sockets on the lower helmet
edge on both sides and then mount the
neck collar into the guide gap piece by
piece.
Note:
Ensure that the A.R.O.S. straps are not twisted.
Note:
When inserting the crown liner, make sure that the headband ventilation
cut-outs are positioned over the ventilation channels at the back of
the helmet and that the crown liner runs centrally between the two
ventilation channels.
Caution:
Never ride when parts of the inner lining have been removed.
Caution:
Excessive heat (e.g. exhaust heat) can cause damage to the inner
lining!
Note:
To avoid damage to the inner lining and inner shell, do not hang the
helmet over the mirrors or handlebar grips.
C. THE HELMET

Chat with your Schuberth E1 manual using AI

Get instant AI answers from your Schuberth E1 manual

Ask anything about the Schuberth E1. Answers come from this manual, with the pages they are based on.

E1 Maintenance Schedule

Remind me when maintenance is due
Yearly
Inspect helmet for damage

Examine the helmet regularly for cracks or structural damage. Small scratches do not affect safety.

Show in the manual (page 43)
Every 5 years
Replace helmet after use

Replace the helmet after 5 to 7 years depending on use and care due to material fatigue and wear.

Show in the manual (page 43)
Before every journey
Check helmet, chinstrap, and visors

Verify functionality of mechanisms and ensure clear visibility. Remove dirt and replace scratched or damaged parts immediately.

Show in the manual (page 40)
As needed
Clean face shield and sun visor

Use a soft cloth with tepid water (

Show in the manual (page 45)
As needed
Wash inner lining

Remove head and cheek pads and wash by hand with mild soap at max 30 C. Air dry at room temperature.

Show in the manual (page 46)
As needed
Clean ventilation cowl and mechanism

Remove the cowl and clean the mechanism. Reassemble ensuring all four mounting points click into place.

Show in the manual (page 46)
As needed
Clean dust filter

Rinse the dust filter behind the chin vent with cold water and mild soap. Let it dry at room temperature before reinserting.

Show in the manual (page 48)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend E1?

Yes No

Frequently Asked Questions

A

It suits riders who want a versatile helmet for touring, commuting, and light adventure use. The flip-up chin bar, strong ventilation, and comfort-focused design make it practical for mixed riding styles.

Is this answer helpful?

A

Yes. It includes a grey-tinted internal sun visor that can be lowered or retracted with a side slide, even while wearing gloves. It is useful for changing light conditions.

Is this answer helpful?

A

The face shield uses a double-lens anti-fog design with an inner insert that creates an insulating air layer. This helps reduce fogging, especially when riding in cooler or humid conditions.

Is this answer helpful?

A

No. The chin bar is meant to stay closed while riding. It is designed for easy opening when stopped, but the manual warns never to ride with it raised.

Is this answer helpful?

A

Use mild soap, lukewarm water, and soft cloths. The inner lining can be hand-washed, while the visor and sun visor should not be cleaned with harsh chemicals, solvents, or alcohol-based products.

Is this answer helpful?

A

No. It is certified to the European ECE-R 22.05 standard and is not intended for use in the USA or Canada. It should only be used in countries that recognize the ECE standard.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Flip-up chin bar with one-button operation makes the helmet practical for stops, touring, and varied riding conditions.
  • Strong ventilation system supports airflow, fog reduction, and comfort in both warm and changing weather.
  • Double-lens anti-fog visor and integrated sun visor improve visibility and day-to-day convenience.
  • Comfortable washable interior uses breathable, skin-friendly materials for a better long-ride fit.
  • Built-in safety features like A.R.O.S. and reflective zones add confidence and visibility.
VS

Disadvantages

  • ECE-R 22.05 approval means it is not legal for use in the USA or Canada.
  • Some components, especially the visor system, require careful handling to avoid scratches or damage.
  • The helmet should be replaced after a crash or strong impact, even if damage is not obvious.
  • Only approved accessories and parts should be used, which limits third-party customization.
M: OA-GPT-54-NAN

Product Specification

Type

Flip-up Helmet

Features

integrated sun visor

Weight

3.75 lb

M: OA-GPT-54-NAN

Product Description

Schuberth E1 Manual: A Smart Adventure Helmet for Every Mile

The Schuberth E1 stands out as a clever blend of touring comfort and adventure-ready practicality. Built as a flip-up helmet with the attitude of a modern dual-sport lid, it is designed for riders who want flexibility without giving up protection or comfort. The Schuberth E1 Manual highlights a helmet shaped for both road travel and off-road use, with aerodynamics tuned to stay stable in the wind and ventilation engineered to keep airflow moving in demanding conditions.

At its core, the E1 focuses on balance. The outer shell uses a glass-fiber reinforced matrix for strength, while the multi-part inner shell helps absorb impact forces and improves fit. Its chin bar opens with a single-button release, and the locking system is made to feel smooth yet secure. For riders who switch between city traffic, long-distance touring, and rougher terrain, that kind of easy operation is a real advantage.

Comfort is another major strength. The interior is removable, washable, and made from materials chosen for breathability, moisture control, and a softer feel against the skin. The helmet also includes a sun visor, a double-lens anti-fog face shield, and a shield that can be adjusted in several positions. These details make daily use easier, especially when weather and light conditions change during a ride.

Ventilation is where the E1 really shows its engineering focus. The helmet combines chin ventilation, face shield ventilation, head ventilation, and rear air extraction to support a steady internal climate. There is also a minimum fresh-air function that helps reduce visor fogging and keep the helmet feeling breathable even when fully closed. For adventure riders, the shortened wind deflector adds useful airflow without sacrificing too much noise control.

Safety features are equally prominent. The helmet includes reflective zones for visibility and SCHUBERTH’s Anti-Roll-Off System, which helps keep the helmet positioned correctly when the chin strap is fastened. It is certified to ECE-R 22.05, but it is not intended for use in the USA or Canada. Like any serious motorcycle helmet, it should be replaced after a major impact or after years of wear.

Notes

  • Best suited for riders who want one helmet for touring and light off-road riding.
  • Use only approved SCHUBERTH accessories and spare parts.
  • Check the chin strap, visor, and shell before every ride.
  • Clean and store the helmet carefully to protect coatings and materials.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly