Manual.ly Logo

Schuberth C4 Pro Manual

0.0 · 0 Ratings

PDF manual · 47 Pages

English

M: OA-GPT-54-NAN
page

/ 47

Loading...
5320bef9a2855dc30ed4da6f2c1fc605a413 page 22
34
3. CHECKING THE FACE SHIELD AND SUN VISOR
Before every journey, check that the mechanisms of the face shield and sun
visor are working properly and that the face shield and sun visor will provide
suciently clear visibility. Any dirt should be removed before riding.
Check the face shield and sun visor for physical damage and cracks. A badly
scratched face shield will considerably impair your vision and should be replaced
before setting o on a journey.
Caution:
Never use tinted face shield or sun visor in conditions of poor visibility,
when riding at night or in a tunnel.
Caution:
Stop riding if visibility is poor.
E. BEFORE EVERY JOURNEY

Chat with your Schuberth C4 Pro manual using AI

Get instant AI answers from your Schuberth C4 Pro manual

Ask anything about the Schuberth C4 Pro. Answers come from this manual, with the pages they are based on.

C4 Pro Maintenance Schedule

Remind me when maintenance is due
Every 5 years
Replace helmet

Replace helmet after 5 to 7 years due to material fatigue and wear, even if no visible damage exists.

Show in the manual (page 36)
Before every journey
Check helmet condition

Inspect helmet regularly for damage such as cracks, dents, or flaking paint. Replace if serious damage is found.

Show in the manual (page 33)
Before every journey
Check chinstrap

Verify chinstrap fits snugly and fastener holds securely when pulled. Never ride with loose or unfastened strap.

Show in the manual (page 33)
Before every journey
Check face shield and sun visor

Ensure mechanisms work properly and visibility is clear. Replace badly scratched shields before riding.

Show in the manual (page 34)
Regular intervals
Clean outer shell

Use water, soap, or motorcycle shampoo. Avoid fuel, thinners, or solvents which can damage the helmet.

Show in the manual (page 38)
Regular intervals
Clean face shield and sun visor

Wipe with soft cloth and mild soap solution under 20 C. Do not use cleaning agents or soak the visor.

Show in the manual (page 39)
Regular intervals
Wash inner lining

Remove head and cheek pads and wash by hand with mild detergent at max 30 C. Dry at room temperature.

Show in the manual (page 40)
As needed
Clean ventilation cowl

Remove air inlet cowl to clean mechanism if necessary, then reattach until it clicks into place.

Show in the manual (page 40)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend C4 Pro?

Yes No

Frequently Asked Questions

A

The C4 Pro described in the text conforms to the ECE-R 22.05 standard. It is intended for countries where the ECE standard is valid. The text also notes it is not certified for the USA and Canada unless you have SCHUBERTH helmets with the appropriate approval and technical specifications.

Is this answer helpful?

A

Yes. The helmet is designed to absorb the effects of only one impact. The text instructs you to replace the helmet after a fall, accident, or any other violent impact, even if damage is not obvious. For safety reasons, the old helmet should be rendered unusable.

Is this answer helpful?

A

The visor uses a fog-free double-lens design. The inner anti-fog lens is fixed with eccentric pins so the two lens panes are sealed together with an insulating air cushion between them. The manual also warns against moisture trapped between the plates and provides cleaning and handling precautions to preserve performance.

Is this answer helpful?

A

No. The text includes cautions stating you should never ride with the chin bar raised and never open the chinstrap while riding. For safe use, open, close, and re-check locks when you are not actively riding.

Is this answer helpful?

A

The sun visor lowers via a glove-friendly slide and retracts back into the helmet. The text cautions against riding in the dark or in poor visibility with the sun visor down, and instructs you to raise it before entering a tunnel. It also warns that the sun visor does not protect against all hazards.

Is this answer helpful?

A

The text recommends mild methods and cautions against damaging chemicals. It advises using gentle, soft cloth cleaning for the visor and sun visor with tepid water and mild soap as appropriate, and explicitly warns not to use petrol, solvents, alcohol-containing cleaners, or strong chemicals. It also warns against soaking the face shield to protect coating durability.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Low wind noise and stable aerodynamics support comfortable high-speed riding and touring.
  • Fog-free double-lens visor helps maintain clear visibility, with anti-scratch coating.
  • Secure chin bar and Micro-Lock ratchet chinstrap enable repeatable fit and safe closure.
  • Multi-stage ventilation (chin, head inlet, and extraction) improves in-helmet climate.
VS

Disadvantages

  • Designed to absorb only one impact; replacement is required after any accident or fall.
  • Anti-fog and visor parts can be damaged by solvents, fuel vapors, or incorrect cleaning.
  • Aeroacoustic performance may vary with motorcycle fairings, seat position, and rider size.
M: OA-GPT-54-NAN

Product Specification

Type

Modular Helmet

Special Features

integrated sun visor

Weight

3.66 lb

M: GO-GEM-FL-25

Product Description

Schuberth C4 Pro: Quiet Performance with Long-Tour Comfort

Built for confident, low-stress riding

The Schuberth C4 Pro is a premium full-face touring helmet designed to feel calm at speed and secure on long journeys. When you follow the Schuberth C4 Pro Manual, you get a clear view of how the helmet balances safety, comfort, and day-to-day usability, from the fit system to the visor hardware.

Aeroacoustics and stability that matter on the road

In wind tunnel development, the C4 Pro focuses on stable aerodynamics and notably low wind noise, including for race-style riding and extended touring. The helmet is engineered to produce practically no uplift at speed, while patented features help reduce whistling and other acoustic disturbances.

Smart protection and everyday visor control

Safety is supported by an ECE-R 22.05 certified design and a multi-layer shell approach, including an outer shell made from a glass-fibre reinforced duroplastic matrix and an inner multi-segment foam structure for impact absorption. The helmet also includes a chin bar with a smooth, positive engagement, plus a Micro-Lock ratchet chinstrap for precise adjustment every time.

The anti-fog, double-lens visor system seals an insulating air cushion to help prevent misting. It also features an anti-scratch coating, and the visor offers an easy-change mechanism without tools. For brightness control, the scratch-resistant sun visor uses UV-protective polycarbonate and can be operated via a glove-friendly slide.

Ventilation designed for a better helmet climate

Ventilation is handled through a multi-part system: a chin air inlet for visor ventilation, a three-stage head ventilation inlet controlled by a glove-accessible slide, and an air extraction flow that draws fresh air through channels to the rear of the helmet.

Key results

  • Low wind noise and stable aerodynamics help reduce rider fatigue on long trips.
  • Anti-fog double-lens visor design supports clear vision across changing conditions.
  • Micro-Lock ratchet chinstrap adjustment helps achieve a firm, comfortable fit.
  • Multi-stage ventilation improves comfort, with air inflow and extraction working together.

Notes

  • Replace the helmet after any fall, accident, or violent impact; it is designed to absorb only one impact.
  • The C4 Pro with ECE approval is not intended for the USA or Canada unless you have the appropriate approved SCHUBERTH variant.
  • Use only original parts or approved accessories; modifications can affect approval and safety.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly