Manual.ly Logo

Sage Barista Pro SES878 Manual

0.0 · 0 Ratings

PDF manual · 128 Pages

English

M: GO-GEM-FL-25
page

/ 128

Loading...
c754df67091d4f41bd85673d07f9bd90b066 page 9
9
EN
Assembly
BEFORE FIRST USE
Machine Preparation
Remove and discard all labels and packaging
materials attached to your espresso machine.
Ensure you have removed all parts and
accessories before discarding the packaging.
Remove the packaging and the plastics bags
containing the water lter and water lter holder.
Clean the water tank, portalter, lter baskets,
milk jug and drip tray using warm water and
a gentle dish washing liquid. Rinse well,
then dry thoroughly before reassembling.
INSTALLING THE WATER FILTER
• Remove the water lter and water lter holder
from the packaging.
• Set the reminder for the next month of
replacement. We recommend to replace
the lter after 3 months.
• Soak the lter in cold water for 5 minutes.
• Wash the lter holder with cold water.
• Insert the lter into the two parts of the lter
holder. Ensure they are connected.
• Remove the water tank from the machine.
Align the base of the lter holder with the
adapter inside the water tank. Push down
to lock into place.
• Fill the water tank with cold potable water and
reattached the machine, ensuring it is properly
attached and sitting ush to the back of the
machine.
• Refer to ‘Care & Cleaning’ on page 18 for further
instructions.
NOTE
DO NOT use highly ltered, demineralised or
distilled water in this machine. This may aect
the taste of the coee.
NOTE
For replacement water lters, visit the Sage
webpage or contact Sage Customer Service.
FILLING THE WATER TANK
• Ensure the water lter is securely tted inside
the water tank.
• Use the handle at the top of the water tank to
assist in lifting it up and away from the machine.
Refer to Instruction Book for more information.
Contact the Breville Customer Service Centre
for further assistance.
AUS 1300 139 798
NZ 0800 273 845
www.Breville.com.au
INSTALL
WATER
FILTER
2
Rinse lter and
mesh
2 43 6
Replace water tankAssemble Set date + 2 months Install lter in tank
5
Soak for
5 minutes
Replace water lter
every 2 months or
60 tank rells
1
MAX
MIN
MAX
MIN
MAX
MIN
• Fill the water tank with cold potable tap water
to below the MAX marking indicated on the side
of the water tank.
• Replace the water tank back on the machine,
pressing down to ensure that it is properly
positioned and attached to the machine.
Refer to Instruction Book for more information.
Contact the Breville Customer Service Centre
for further assistance.
AUS 1300 139 798
NZ 0800 273 845
www.Breville.com.au
INSTALL
WATER
FILTER
2
Rinse lter and
mesh
2 43 6
Replace water tankAssemble Set date + 2 months Install lter in tank
5
Soak for
5 minutes
Replace water lter
every 2 months or
60 tank rells
1
MAX
MIN
MAX
MIN
MAX
MIN
NOTE
Replace the water daily. The water tank should be
lled with fresh, cold tap water before each use.

Chat with your Sage Barista Pro SES878 manual using AI

Get instant AI answers from your Sage Barista Pro SES878 manual

Ask anything about the Sage Barista Pro SES878. Answers come from this manual, with the pages they are based on.

Barista Pro SES878 Maintenance Schedule

Remind me when maintenance is due
Every 2 months or 60 tank refills
Replace water filter

Replace the water filter every 2 months or after 60 tank refills to reduce scale and impurities.

Every 3 months
Replace water filter

We recommend replacing the filter after 3 months if not following the usage-based interval.

When alert appears
Run cleaning cycle

Run a cleaning cycle with a tablet when the LCD displays a FLUSH alert.

Show in the manual (page 18)
When alert appears
Descaling

Perform a descaling cycle when the LCD displays a DESCALE alert to remove mineral build-up.

Show in the manual (page 19)
After texturing milk
Clean steam wand

Wipe the steam wand with a damp cloth and purge it after every use to clear milk residue.

Show in the manual (page 21)
After each use
Rinse filter baskets and portafilter

Rinse filter baskets and portafilter under hot water immediately after use to remove coffee oils.

Show in the manual (page 21)
After each use
Clean group head

Wipe the group head interior and shower screen with a damp cloth after use to remove coffee particles.

Show in the manual (page 21)
Regular intervals
Clean drip tray

Remove, empty, and clean the drip tray at regular intervals, especially when the full indicator shows.

Show in the manual (page 21)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend Barista Pro SES878?

Yes No

Product Specification

Power

1650W

Pump pressure

130.53 psi

Coffee system

Coffee beans, Coffee powder

Grinder

adjustable conical grinder

Water tank capacity

0.53 gal

Bean container capacity

0.55 lb

Special features

2-cup function, steam nozzle, removable water tank

Dimensions

15.98x13.94x15.98in (WxHxD)

Weight

20.01 lb

M: GO-GEM-FL-25

Product Description

M: GO-GEM-FL-25

© Copyright 2026 Manual.ly