Manual.ly Logo

Sage Barista Pro SES878 Manual

0.0 · 0 Ratings

PDF manual · 128 Pages

English

M: GO-GEM-FL-25
page

/ 128

Loading...
c754df67091d4f41bd85673d07f9bd90b066 page 15
21
EN
CLEANING THE STEAM WAND
• The steam wand should always be cleaned after
texturing milk. Wipe the steam wand with a damp
cloth.
• After use, it is recommended to purge the steam
wand for a couple of seconds, to clear any
remaining milk. With the steam wand positioned
down over the drip tray, turn the STEAM dial to
for a couple of seconds allow the machine
to create steam for a couple of seconds before
turning it back to the vertical position.
• If the steam tip hole becomes blocked, it will
reduce frothing performance. Use the provided
steam wand cleaning tool to clear the opening.
• If the steam wand is still blocked, use the spanner
in the middle of the steam wand cleaning tool to
unscrew the tip. Soak the tip in hot water before
using the cleaning tool to unblock again. Replace
the tip back on the steam wand, using the tool.
CLEANING THE FILTER BASKETS
AND PORTAFILTER
• The lter baskets and portalter should be rinsed
under hot water immediately after use to remove
all residual coee oils.
• If any of the holes in the lter basket become
blocked, use the pin on the end of the provided
cleaning tool to unblock the holes.
• If the holes remain blocked, dissolve a cleaning
tablet in hot water and soak lter basket and
portalter in solution for approx. 20 minutes.
Rinse thoroughly.
CLEANING THE GROUP HEAD
• The group head interior and shower screen
should be wiped with a damp cloth after use to
remove any ground coee particles.
• Periodically purge the machine. Place an empty
lter basket and portalter into the group head.
Press the 1 CUP button and run a short ow of
water to rinse out any residual coee. Press the
1 CUP button again to stop the hot water.
Remove the portalter and rinse thoroughly.
CLEANING THE DRIP TRAY
1. The drip tray should be removed, emptied
and cleaned at regular intervals, particularly
when the drip tray full indicator is showing
EMPTY ME!
2. Remove the drip tray from the machine and
separate the parts. The EMPTY ME! indicator
can also be removed from the drip tray by
pulling upwards to release the side latches.
Wash all parts in warm soapy water with a
soft cloth. Rinse and dry thoroughly before
reassembling and attaching to the machine.
3. The storage tray (located behind the drip tray)
can be removed and cleaned with a soft,
damp cloth.
NOTE
All parts should be cleaned by hand using
warm water and a gentle dish washing liquid.
Do not use abrasive cleansers, pads or cloths
which can scratch the surface. Do not clean any
of the parts or accessories in the dishwasher.
WARNING
Do not immerse the power cord, power plug
or appliance in water or any other liquid.
CLEANING THE OUTER HOUSING
Wipe the outer housing with a soft, damp cloth
and then polish with a soft, dry cloth.
STORING YOUR MACHINE
Before storing, press the POWER button to
turn the machine o then turn o and remove
the plug from the power outlet. Remove unused
beans from the hopper, clean the grinder (see
page 18), empty the water tank and the drip
tray. Ensure the machine is cool, clean and dry.
Place accessories in the storage tray.
Store the machine upright and do not store
anything on top.
ERROR MODE
If your machine displays on the LCD, contact
Sage Customer Service.

Chat with your Sage Barista Pro SES878 manual using AI

Get instant AI answers from your Sage Barista Pro SES878 manual

Ask anything about the Sage Barista Pro SES878. Answers come from this manual, with the pages they are based on.

Barista Pro SES878 Maintenance Schedule

Remind me when maintenance is due
Every 2 months or 60 tank refills
Replace water filter

Replace the water filter every 2 months or after 60 tank refills to reduce scale and impurities.

Every 3 months
Replace water filter

We recommend replacing the filter after 3 months if not following the usage-based interval.

When alert appears
Run cleaning cycle

Run a cleaning cycle with a tablet when the LCD displays a FLUSH alert.

Show in the manual (page 18)
When alert appears
Descaling

Perform a descaling cycle when the LCD displays a DESCALE alert to remove mineral build-up.

Show in the manual (page 19)
After texturing milk
Clean steam wand

Wipe the steam wand with a damp cloth and purge it after every use to clear milk residue.

Show in the manual (page 21)
After each use
Rinse filter baskets and portafilter

Rinse filter baskets and portafilter under hot water immediately after use to remove coffee oils.

Show in the manual (page 21)
After each use
Clean group head

Wipe the group head interior and shower screen with a damp cloth after use to remove coffee particles.

Show in the manual (page 21)
Regular intervals
Clean drip tray

Remove, empty, and clean the drip tray at regular intervals, especially when the full indicator shows.

Show in the manual (page 21)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend Barista Pro SES878?

Yes No

Product Specification

Power

1650W

Pump pressure

130.53 psi

Coffee system

Coffee beans, Coffee powder

Grinder

adjustable conical grinder

Water tank capacity

0.53 gal

Bean container capacity

0.55 lb

Special features

2-cup function, steam nozzle, removable water tank

Dimensions

15.98x13.94x15.98in (WxHxD)

Weight

20.01 lb

M: GO-GEM-FL-25

Product Description

M: GO-GEM-FL-25

© Copyright 2026 Manual.ly