Manual.ly Logo

Rothenberger ROMAX 4000 Manual

0.0 · 0 Ratings

PDF manual · 276 Pages

English

M: QW-35-FL
page

/ 276

Loading...
57cc35bcbbbb55074269fa1050e84b22c797 page 15
ENGLISH
13
1 Safety Notes
FCC-Statement (Class A, Group 1)
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
Federal Communications Commission Statement
NOTE – This equipment has been tested and found to comply with the limits for a Class A ,
Group 1 digital device, pursuant to Part 15 of the FCC Rules. These limit values were designed
to provide adequate protection against faults occurring during operation in industrial areas. This
equipment generates uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
Class A, Group 1 Note
Warning – This is a Class A, Group 1 product. In a domestic environment this product may
cause radio interference in which case the user may be required to take adequate measures.
1.1 Intended use
The user bears sole responsibility for any damage caused by improper use.
Generally accepted accident prevention regulations and the enclosed safety information must be
observed.
ROMAX 4000:
The ROMAX 4000 is designed exclusively for the use of pressing jaws manufactured by
ROTHENBERGER or that have been declared suitable by ROTHENBERGER.
The device and the press jaws are designed exclusively for crimp fittings, for which the corre-
sponding pressing jaws have been designed. Any other or additional use shall be deemed im-
proper.
ROTHENBERGER cannot accept any liability for the resultant consequences and damage, nor
for the use of pressing jaws from other manufacturers, neither for damage caused by these
pressing jaws.
Proper usage also includes compliance with the operating manual, compliance with the inspec-
tion and servicing conditions and adherence to all the relevant safety regulations.
The ROMAX 4000 is a handheld electric machine and must not be used for stationary applica-
tions.
This device may only be used correctly as described.
Use only original ROTHENBERGER or CAS (Cordless Alliance System) battery packs and ac-
cessories.
Charger and battery:
The chargers are only suitable for charging ROTHENBERGER and CAS (Cordless Alliance Sys-
tem) battery packs.
This tool is not designed for use by persons with physical, sensory or mental disabilities, or with
insufficient experience and/or knowledge, unless they are supervised by a person responsible
for their safety, or have received instructions on how to use the tool by this person.
Never attempt to charge batteries that are not rechargeable. Danger of explosion!
Battery packs marked with CAS are 100% compatible with CAS devices (Cordless Alliance Sys-
tem). To select the appropriate device, please contact your ROTHENBERGER dealer. Read the
relevant instructions for the devices used.
1.2 General Power Tool Safety Warnings
WARNING! Read all safety warnings, instructions, illustrations and specifications
provided with this power tool.
Failure to follow all instructions listed below may result in electric shock, fire and/or serious inju-
ry.

Chat with your Rothenberger ROMAX 4000 manual using AI

Get instant AI answers from your Rothenberger ROMAX 4000 manual

Ask anything about the Rothenberger ROMAX 4000. Answers come from this manual, with the pages they are based on.

ROMAX 4000 Maintenance Schedule

Remind me when maintenance is due
Every 2 years or 40,000 presses
Professional machine service

Have the machine serviced by an authorized ROTHENBERGER workshop after 40,000 pressing cycles or every 2 years, whichever comes first.

Show in the manual (page 28)
After every use
Clean and grease drive rolls, bolt, and press jaws

When finished working, clean and grease the drive rolls, bolt, and press jaws using high-quality pressing or ball bearing grease. Keep the pressing contour free of grease.

Show in the manual (page 28)
Regularly
Inspect bolt for damage

Check the bolt for signs of damage at regular intervals. Have damaged bolts replaced by an authorized ROTHENBERGER repair shop.

Show in the manual (page 28)
Before each use
Check press jaw functionality and movement

Verify that press jaws are fully functional and move freely with the drive rolls. Do not use damaged press jaws; send them to an authorized service center.

Show in the manual (page 28)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend ROMAX 4000?

Yes No

Frequently Asked Questions

A

The device generates a maximum piston force of approximately 34 kilonewtons. This capability allows for effective joining of various pipe types and ensures secure compression of fittings during the application process for professional results.

Is this answer helpful?

A

Insert the battery until you hear a click indicating the catch has engaged. To remove, press the release catch mechanism and pull the pack out gently. Always store the spare battery in a cool dry place away from children and metal objects.

Is this answer helpful?

A

No, you should only use original ROTHENBERGER or CAS compatible battery packs. Using non approved batteries may cause explosions or void the safety certification. Check the manual for the specific model codes suitable for this machine.

Is this answer helpful?

A

A full service is recommended after 40,000 pressing cycles or every two years depending on usage intensity. Authorized workshops must perform these checks to ensure safety mechanisms like emergency stops still function correctly.

Is this answer helpful?

A

Yes, the noise level can exceed 85 decibels during operation. You should wear certified hearing protection whenever the motor runs to prevent long term hearing damage for yourself.

Is this answer helpful?

A

The tool functions between negative ten and sixty degrees Celsius. Storage should occur within similar limits to preserve battery chemistry and prevent material deformation in harsh weather conditions.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • High piston force up to 34 kN for strong connections
  • Cordless design offers greater mobility and access
  • LED indicators show status clearly for operator feedback
  • Rotatable press jaws allow angled positioning easily
  • Internal counter tracks presses for maintenance scheduling
VS

Disadvantages

  • Heavier weight when fully loaded with large battery
  • Pricier initial cost than basic electric models
  • Some repairs require authorized workshop visits only
  • Temperature limits restrict outdoor use in extreme cold
  • Warranty voids if internal seals are damaged
M: QW-35-FL

Product Specification

Battery

18V, 4.0Ah, Lithium-Ion

Handle

Plastic

Total Length

17.72in

Package Contents

Case, Charger, Battery

M: QW-35-FL

Product Description

Discover Professional Pipe Fitting Efficiency Today

The Rothenberger ROMAX 4000 Cordless Crimping Tool with case + battery 4.0Ah Manual provides a robust solution for modern plumbing applications. This powerful handheld unit eliminates cable clutter while delivering consistent hydraulic force for every connection. Technicians value the intuitive interface that guides every pressing cycle safely and accurately without guesswork. Emergency stops are strategically placed to protect operators from mechanical hazards during intense work sessions continuously. Safety goggles and gloves remain mandatory gear alongside this premium equipment setup for everyone involved.

Advanced Specifications for Heavy Duty Jobs

Maximum piston force reaches thirty four kilonewtons to ensure secure joint integrity across different pipe materials. Motor speed options allow rapid processing times without sacrificing connection quality or structural strength. Portable designs weigh under three kilograms excluding the power source for reduced operator fatigue. Adjustable jaw rotation angles provide flexibility when accessing confined spaces within complex building infrastructure layouts. Inspection intervals are tracked internally to signal when maintenance checks become necessary for ongoing compliance standards.

Battery Management and Charging Procedures

Original lithium ion packs support extended runtimes throughout full workdays without significant degradation over time. Clear LED indicators warn users instantly regarding charge status before starting critical operations on site. Optimal storage environments prevent thermal damage during off hours between scheduled shifts for the team. Fast charging units return readiness quickly so downtime stays minimal during busy installation schedules regularly. Always verify voltage compatibility before plugging into mains power sources for safety assurance always.

Long Term Reliability and Service Support

Warranty coverage depends heavily on adherence to strict operational guidelines set forth by the manufacturer. Unauthorized repairs may void protections so always contact authorized centers for certified assistance immediately. Spare parts availability ensures machines stay functional year after year through routine upkeep cycles. Proper disposal methods protect the environment when retirement becomes necessary for worn components responsibly. Follow these steps to maximize investment value and maintain high performance standards consistently for all users.

Final Thoughts On Selection Criteria

Choosing the right cordless system impacts productivity rates significantly compared to traditional manual alternatives available previously. Training programs help staff learn proper handling techniques to avoid accidental injuries on site frequently. Regular cleaning extends component lifespan by removing debris accumulation that affects moving parts negatively. Noise levels remain manageable for indoor residential projects requiring quiet work conditions nearby without disturbance. Trustworthy brands deliver confidence when completing critical gas water or heating installations today reliably.

M: QW-35-FL

© Copyright 2026 Manual.ly