Manual.ly Logo

Profitec PRO 400 Manual

0.0 · 0 Ratings

PDF manual · 48 Pages

English

M: qwen/qwen3.5-flash-20260224
page

/ 48

Loading...
6d6972eb1269d32970b3f7b7cc02c21e5540 page 14
DEUTSCH
Deutsche Original-Bedienungsanleitung 20
Säubern Sie das Duschensieb und die Gruppendichtung im unteren Bereich der Kaffeebrühgruppe von
sichtbarer Verschmutzung ohne diese Teile zu entnehmen.
Bitte beachten Sie, dass die Filterträger, Tropfblech der Wasserauffangschale und der
Wassertank nicht für die Spülmaschine geeignet sind.
Reinigung je nach Erfordernis:
Reinigen Sie das Dampfventil nach jedem Gebrauch.
Säubern Sie das Außengehäuse bei abgeschalteter und abgekühlter Maschine.
Erneuern Sie das Kesselwasser, je nach Gebrauch, alle 1 – 2 Wochen. Hierzu entnehmen Sie das Wasser
über das Heißwasserrohr und über die Brühgruppe.
Zur Reinigung ein weiches, angefeuchtetes Tuch (Empfehlung Mikrofaser) verwenden.
Auf keinen Fall Scheuermittel oder chlorhaltiges Reinigungsmittel einsetzen!
Entleeren Sie die Wasserauffangschale rechtzeitig. Warten Sie nicht, bis diese randvoll ist.
7.2 Reinigung der Brühgruppe
Gruppenreiniger zur bequemen Reinigung und Entfettung erhalten Sie bei Ihrem Fachhändler. Eine
Gruppenreinigung sollte etwa alle 90 - 140 Tassen durchgeführt werden. Die Reinigung erfolgt mittels dem
im Lieferumfang enthaltenen Blindsieb wie folgt:
1. Heizen Sie die Maschine auf, bis der Betriebsdruck erreicht wird (1-1,2 bar).
2. Reinigen Sie die Brühgruppe mit Hilfe der Brühgruppenbürste.
3. Setzen Sie das Blindsieb in den Filterträger.
4. Füllen Sie das Blindsieb mit Gruppenreiniger gemäß Packungsangabe.
5. Setzen Sie den Filterträger in die Brühgruppe ein.
6. Betätigen Sie den Brühhebel, damit sich das Blindsieb mit Wasser befüllt.
7. Lassen Sie den Reiniger einwirken, indem Sie den Brühhebel in Halbstellung (45°) bringen.
8. Nach ca. 20-60 Sekunden den Brühhebel ganz nach unten drücken, so werden aus dem Zylinder
unter der Brühgruppe das gelöste Fett bzw. die gelösten Öle abgelassen.
9. Wiederholen Sie die Punkte 5-7 mehrmals, bis aus dem Zylinder der Brühgruppe wieder klares Wasser
ausläuft.
10. Filterträger mit Blindsieb entnehmen, mit frischem Wasser ausspülen, anschließend wieder
einsetzen.
11. Betätigen Sie den Brühhebel für ca. 40 Sekunden, dann wieder ganz nach unten drücken.
12. Spülen Sie den Filterträger erneut ab und wiederholen Sie Punkt 10. Danach ist die Brühgruppe wieder
einsatzbereit.
13. Tauschen Sie das Blindsieb wieder gegen das Kaffeesieb aus.
Vorsicht!
Während der Reinigung mithilfe des Blindsiebs kann es zu heißen Wasserspritzern
kommen.
Bei zu häufigem Rückspülen mit einem fettlösenden Mittel kommt es zur Entfettung der
Achse und der Dichtung des Brühhebels. Die Folge ist ein Quietschen der Brühgruppe und
ein erhöhter Verschleiß. Das Quietschen wird nach längerer Benutzung durch das
Kaffeefett gelöst. Es wird aber empfohlen, hin und wieder mit dem Blindsieb ohne
fettlösendem Mittel rückzuspülen, somit werden Kaffeereste gelöst und setzen sich nicht
in der Brühgruppe fest.
Entleeren Sie die Wasserauffangschale rechtzeitig. Warten Sie nicht bis diese randvoll ist.
7.3 Kleine technische Servicearbeiten
Vorsicht!
Stellen Sie sicher, dass die Maschine während der Wartung und beim Ersetzen von
Einzelteilen vom Stromnetz getrennt ist.

Chat with your Profitec PRO 400 manual using AI

Get instant AI answers from your Profitec PRO 400 manual

Ask anything about the Profitec PRO 400. Answers come from this manual, with the pages they are based on.

PRO 400 Maintenance Schedule

Daily
Clean portafilter, filters, tank, and tray

Remove filter from portafilter. Clean portafilters, filters, water tank, drip tray, and plate daily with warm water or food-safe detergent.

Show in the manual (page 19)
Every 1-2 weeks
Refresh boiler water

Depending on usage, replace boiler water every 1-2 weeks by dispensing hot water via the hot water wand or brew group.

Show in the manual (page 20)
After every use
Clean steam wand and nozzle

Wipe the steam wand and nozzle with a damp cloth after every use to remove liquid residue before it hardens.

Show in the manual (page 19)
Every 90-140 cups
Clean brew group with cleaner

Perform backflushing using blind filter and group cleaner when approximately 90-140 cups have been brewed.

Show in the manual (page 20)
Regularly
Empty drip tray

Empty the water collection tray in time; do not wait until it is full to avoid spillage.

Show in the manual (page 20)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend PRO 400?

Yes No

Frequently Asked Questions

A

You can adjust the pressure between 8.5 and 12 bar by turning the screw under the drip tray. Use a coin or flat screwdriver with the portafilter removed and the blind filter inserted. Check the lower gauge to confirm your setting.

Is this answer helpful?

A

No, you must use soft water with a maximum hardness of 4 dH. Hard water causes limescale. Use a filter or water softener to protect the boiler and heating element from damage.

Is this answer helpful?

A

Switch the machine on with the lever up, toggle the switch to position one then back to zero with the LED blinking. The green light will stay on to confirm activation. It helps wet grounds evenly.

Is this answer helpful?

A

No, the Eco mode turns off heating after 90 minutes of inactivity. You can reactivate it by pulling the brew lever or toggle the switch. It helps save electricity when not brewing.

Is this answer helpful?

A

Clean the brew group every 90 to 140 cups using a group cleaner and blind filter. This removes oils and coffee residue. Follow the manual instructions to avoid damaging the gasket during cleaning.

Is this answer helpful?

A

Boiler settings allow 120, 124, or 128 degrees Celsius. This translates to brew temps around 90 to 98 degrees. Adjust based on roast darkness to balance acidity and bitterness accurately.

Is this answer helpful?

M: qwen/qwen3.5-flash-20260224

Advantages and Disadvantages

Advantages

  • Adjustable brewing pressure allows customization between 8.5 and 12 bar for optimal extraction
  • Three-position switch controls boiler temperature effectively for different roast profiles
  • Powerful steam wand creates thick microfoam suitable for cappuccinos and lattes quickly
  • Eco mode turns off heating after 90 minutes to reduce energy consumption significantly
  • Includes essential accessories like tamper and various portafilter baskets for immediate use
VS

Disadvantages

  • Heavy weight of 21.5 kg requires a sturdy counter and makes moving difficult
  • Key components including portafilter are not dishwasher safe and must be washed manually
  • Default preinfusion is deactivated which may require configuration for some users
  • Boiler capacity is 1.6 liters which may limit back-to-back milk for large groups
  • Regular descaling is necessary to prevent limescale damage from hard water sources
M: qwen/qwen3.5-flash-20260224

Product Specification

Type

Dual-boiler

Power

1400 W

Color

Stainless steel

Pump Pressure

174.05 psi

Coffee System

Ground coffee

Milk System

No

Brew Temperature

Adjustable (3 Settings)

Water Tank Capacity

94.68 fl oz

Features

2-Cup Function, Auto-off after 90min (Eco mode), Hot water / Steam nozzle, Pre-brew system, Removable water tank, Boiler gauge, Pump gauge, Heated cup tray

Smart Home

No

Dimensions

8.98 x 14.65 x 21.97 in (W x H x D)

Weight

47.40 lbs

M: qwen/qwen3.5-flash-20260224

Product Description

Enjoying Home Espresso

Brewing perfect espresso at home requires precision and quality equipment. The Profitec Pro 400 stands out as an excellent choice for enthusiasts seeking barista-grade results in a compact form. This machine combines professional technology with user-friendly controls suitable for various kitchen settings. Understanding your specific settings is crucial for the best beverage, which is why reading the Profitec Pro 400 Manual is highly recommended before first use. It provides essential safety and operational guidance.

Technical Specifications

This heat exchanger machine features a 1.6-liter boiler and a large 2.8-liter water tank for extended use. Power consumption is rated at 1400 Watts, ensuring rapid heat recovery and stability. The boiler temperature can be manually set to 120, 124, or 128 degrees Celsius using the three-position rotary switch. This flexibility allows you to tailor extraction heat to different coffee roasts. Darker roasts require cooler temperatures to balance flavor. Lighter roasts benefit from elevated heat to extract notes.

Customizable Features

Users can manually adjust brewing pressure between 8.5 and 12 bar via a specific screw located under the drip tray. This precise control is vital for optimizing tamping pressure and grind fineness to suit specific beans. Additionally, the machine includes preinfusion capabilities. While deactivated by factory settings, this feature wets coffee grounds evenly before full pressure builds to improve extraction uniformity and crema formation. An Eco mode is also integrated to promote sustainability, turning off the heating element after 90 minutes of inactivity.

Maintenance and Care

Regular cleaning ensures longevity and consistent taste quality throughout the year. The brew group should be cleaned every 90 to 140 cups using a dedicated group cleaner and the included blind filter. Daily maintenance involves rinsing the water tank thoroughly and wiping the steam wand immediately after use. Parts like the portafilter and drip tray are not dishwasher safe and require hand washing to preserve materials. Proper care prevents mineral buildup and maintains the integrity of the critical gaskets and seals.

Operational Tips

The steam wand delivers significant power for frothing milk quickly. For optimal results, purge wet steam from the wand for five seconds before steaming milk. This prevents diluting the foam with condensation. Always keep the nozzle submerged during frothing to avoid splashing. Additionally, the unit weighs 21.5 kg, requiring a sturdy surface. Ensure electricity matches voltage specifications for your region before connecting the power cord. Follow these guidelines for a reliable experience.

Included Accessories and Support

The package contains tools for immediate brewing. You receive a single and double spout portafilter, along with various baskets. A steel tamper and brush are also provided. Troubleshooting issues like little crema usually involves adjusting grind size or checking water hardness. Water hardness should not exceed four degrees of German hardness to protect the boiler. Use soft water or a filter.

M: qwen/qwen3.5-flash-20260224

© Copyright 2026 Manual.ly