Manual.ly Logo

Profitec PRO 400 Manual

0.0 · 0 Ratings

PDF manual · 48 Pages

English

M: qwen/qwen3.5-flash-20260224
page

/ 48

Loading...
6d6972eb1269d32970b3f7b7cc02c21e5540 page 13
DEUTSCH
Deutsche Original-Bedienungsanleitung 19
6.9.1 Heißwasserentnahme
1. Geeignetes Gefäß (mit wärmeisoliertem Haltegriff) unter das Heißwasserrohr halten.
Jetzt können Sie nahezu kochendes Wasser (z. B. für Tee) entnehmen, indem Sie das Heißwasserventil
öffnen.
2. Nach der Entnahme schließen Sie das Ventil wieder. Der Kessel wird automatisch wieder mit
Frischwasser befüllt.
Bei ausgeschalteter Maschine kann mehr Heißwasser entnommen werden, da kein kaltes
Frischwasser nachgepumpt wird. Die Maschine muss jedoch zur Heißwasserentnahme
nicht zwingend ausgeschaltet werden.
Vorsicht!
Die Heißwasserdüse am Ende des Auslassrohres in das Gefäß halten, damit Verletzungen
durch Heißwasserspritzer vermieden werden.
6.9.2 Dampfentnahme
Die PRO 400 ermöglicht die Erzeugung von Dampf zum Erhitzen oder Aufschäumen von Flüssigkeiten, wie
z.B. Milch oder Glühwein. Sie ist eine professionelle Espressomaschine in kompakter Form und hat ein
enormes Dampfvolumen. Dies bedeutet, dass Sie innerhalb weniger Sekunden Milchschaum zubereiten
können.
Beachten Sie deshalb die untenstehenden Punkte, damit die Milch nicht durch zu lange Dampfentnahme
zum Kochen gebracht wird, da der Milchschaum sonst zerfällt.
1. Wichtig: Dampfventil für ca. 5 Sekunden öffnen, damit das Kondenswasser entfernt wird und keine
Milch in den Kessel gezogen wird.
2. Dampfdüse (sie befindet sich am Endstück des Dampfrohres) in die Flüssigkeit eintauchen.
3. Dampfhahn wieder öffnen.
4. Flüssigkeit erwärmen und/ oder aufschäumen.
5. Nach dem Aufschäumen oder Erhitzen kurz Dampf in die Wasserauffangschale ablassen, um ein
Verkleben der Öffnungen in der Dampfdüse zu vermeiden.
Verletzungsgefahr
Düse immer unter der Oberfläche der Flüssigkeit halten, damit es nicht zu Spritzern
kommt.
Wichtig
Dampfdüse und Dampfrohr nach jedem Gebrauch mit einem feuchten Tuch reinigen,
damit eventuelle Flüssigkeitsreste sofort beseitigt werden und nicht verhärten.
Verletzungsgefahr
Bei der Reinigung ist Hautkontakt mit dem Dampfrohr unbedingt zu vermeiden.
7. REINIGUNG UND WARTUNG
Eine regelmäßige und sorgfältige Pflege ist für die Leistung, Lebensdauer und Betriebssicherheit Ihrer
Maschine sehr wichtig.
Vorsicht!
Vor der Reinigung die Maschine immer ausschalten (Netzschalter in unterer Position), den
Stecker aus der Steckdose ziehen und das Gerät auf Raumtemperatur abkühlen lassen.
Tauchen Sie die Maschine zur Reinigung niemals unter Wasser. Bei unsachgemäßer
Reinigung besteht die Gefahr eines elektrischen Schlages.
7.1 Allgemeine Reinigung
Tägliche Reinigung:
Entfernen Sie das Sieb aus dem Filterträger und reinigen Sie Filterträger, Siebe, Wasserbehälter,
Wasserauffangschale und das Tropfblech der Wasserauffangschale täglich mit warmem Wasser und/oder
einem lebensmittelechten Spülmittel.

Chat with your Profitec PRO 400 manual using AI

Get instant AI answers from your Profitec PRO 400 manual

Ask anything about the Profitec PRO 400. Answers come from this manual, with the pages they are based on.

PRO 400 Maintenance Schedule

Daily
Clean portafilter, filters, tank, and tray

Remove filter from portafilter. Clean portafilters, filters, water tank, drip tray, and plate daily with warm water or food-safe detergent.

Show in the manual (page 19)
Every 1-2 weeks
Refresh boiler water

Depending on usage, replace boiler water every 1-2 weeks by dispensing hot water via the hot water wand or brew group.

Show in the manual (page 20)
After every use
Clean steam wand and nozzle

Wipe the steam wand and nozzle with a damp cloth after every use to remove liquid residue before it hardens.

Show in the manual (page 19)
Every 90-140 cups
Clean brew group with cleaner

Perform backflushing using blind filter and group cleaner when approximately 90-140 cups have been brewed.

Show in the manual (page 20)
Regularly
Empty drip tray

Empty the water collection tray in time; do not wait until it is full to avoid spillage.

Show in the manual (page 20)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend PRO 400?

Yes No

Frequently Asked Questions

A

You can adjust the pressure between 8.5 and 12 bar by turning the screw under the drip tray. Use a coin or flat screwdriver with the portafilter removed and the blind filter inserted. Check the lower gauge to confirm your setting.

Is this answer helpful?

A

No, you must use soft water with a maximum hardness of 4 dH. Hard water causes limescale. Use a filter or water softener to protect the boiler and heating element from damage.

Is this answer helpful?

A

Switch the machine on with the lever up, toggle the switch to position one then back to zero with the LED blinking. The green light will stay on to confirm activation. It helps wet grounds evenly.

Is this answer helpful?

A

No, the Eco mode turns off heating after 90 minutes of inactivity. You can reactivate it by pulling the brew lever or toggle the switch. It helps save electricity when not brewing.

Is this answer helpful?

A

Clean the brew group every 90 to 140 cups using a group cleaner and blind filter. This removes oils and coffee residue. Follow the manual instructions to avoid damaging the gasket during cleaning.

Is this answer helpful?

A

Boiler settings allow 120, 124, or 128 degrees Celsius. This translates to brew temps around 90 to 98 degrees. Adjust based on roast darkness to balance acidity and bitterness accurately.

Is this answer helpful?

M: qwen/qwen3.5-flash-20260224

Advantages and Disadvantages

Advantages

  • Adjustable brewing pressure allows customization between 8.5 and 12 bar for optimal extraction
  • Three-position switch controls boiler temperature effectively for different roast profiles
  • Powerful steam wand creates thick microfoam suitable for cappuccinos and lattes quickly
  • Eco mode turns off heating after 90 minutes to reduce energy consumption significantly
  • Includes essential accessories like tamper and various portafilter baskets for immediate use
VS

Disadvantages

  • Heavy weight of 21.5 kg requires a sturdy counter and makes moving difficult
  • Key components including portafilter are not dishwasher safe and must be washed manually
  • Default preinfusion is deactivated which may require configuration for some users
  • Boiler capacity is 1.6 liters which may limit back-to-back milk for large groups
  • Regular descaling is necessary to prevent limescale damage from hard water sources
M: qwen/qwen3.5-flash-20260224

Product Specification

Type

Dual-boiler

Power

1400 W

Color

Stainless steel

Pump Pressure

174.05 psi

Coffee System

Ground coffee

Milk System

No

Brew Temperature

Adjustable (3 Settings)

Water Tank Capacity

94.68 fl oz

Features

2-Cup Function, Auto-off after 90min (Eco mode), Hot water / Steam nozzle, Pre-brew system, Removable water tank, Boiler gauge, Pump gauge, Heated cup tray

Smart Home

No

Dimensions

8.98 x 14.65 x 21.97 in (W x H x D)

Weight

47.40 lbs

M: qwen/qwen3.5-flash-20260224

Product Description

Enjoying Home Espresso

Brewing perfect espresso at home requires precision and quality equipment. The Profitec Pro 400 stands out as an excellent choice for enthusiasts seeking barista-grade results in a compact form. This machine combines professional technology with user-friendly controls suitable for various kitchen settings. Understanding your specific settings is crucial for the best beverage, which is why reading the Profitec Pro 400 Manual is highly recommended before first use. It provides essential safety and operational guidance.

Technical Specifications

This heat exchanger machine features a 1.6-liter boiler and a large 2.8-liter water tank for extended use. Power consumption is rated at 1400 Watts, ensuring rapid heat recovery and stability. The boiler temperature can be manually set to 120, 124, or 128 degrees Celsius using the three-position rotary switch. This flexibility allows you to tailor extraction heat to different coffee roasts. Darker roasts require cooler temperatures to balance flavor. Lighter roasts benefit from elevated heat to extract notes.

Customizable Features

Users can manually adjust brewing pressure between 8.5 and 12 bar via a specific screw located under the drip tray. This precise control is vital for optimizing tamping pressure and grind fineness to suit specific beans. Additionally, the machine includes preinfusion capabilities. While deactivated by factory settings, this feature wets coffee grounds evenly before full pressure builds to improve extraction uniformity and crema formation. An Eco mode is also integrated to promote sustainability, turning off the heating element after 90 minutes of inactivity.

Maintenance and Care

Regular cleaning ensures longevity and consistent taste quality throughout the year. The brew group should be cleaned every 90 to 140 cups using a dedicated group cleaner and the included blind filter. Daily maintenance involves rinsing the water tank thoroughly and wiping the steam wand immediately after use. Parts like the portafilter and drip tray are not dishwasher safe and require hand washing to preserve materials. Proper care prevents mineral buildup and maintains the integrity of the critical gaskets and seals.

Operational Tips

The steam wand delivers significant power for frothing milk quickly. For optimal results, purge wet steam from the wand for five seconds before steaming milk. This prevents diluting the foam with condensation. Always keep the nozzle submerged during frothing to avoid splashing. Additionally, the unit weighs 21.5 kg, requiring a sturdy surface. Ensure electricity matches voltage specifications for your region before connecting the power cord. Follow these guidelines for a reliable experience.

Included Accessories and Support

The package contains tools for immediate brewing. You receive a single and double spout portafilter, along with various baskets. A steel tamper and brush are also provided. Troubleshooting issues like little crema usually involves adjusting grind size or checking water hardness. Water hardness should not exceed four degrees of German hardness to protect the boiler. Use soft water or a filter.

M: qwen/qwen3.5-flash-20260224

© Copyright 2026 Manual.ly