Manual.ly Logo

PowerWalker VFI 60K CPG PF1 3/3 BX Manual

0.0 · 0 Ratings

PDF manual · 49 Pages

English

M: QW-35-FL
page

/ 49

Loading...
eb86aceb13ac64e0e2a197c404ab026af161 page 30
45
5. Storage and Maintenance
5-1. Storage
Before storing, charge the UPS at least 7 hours. Store the UPS covered and upright in a cool, dry
location. During storage, recharge the battery in accordance with the following table:
Storage Temperature
Recharge Frequency
Charging Duration
-25°C - 40°C
Every 3 months
1-2 hours
40°C - 45°C
Every 2 months
1-2 hours
5-2. Maintenance
The UPS system operates with hazardous voltages. Repairs may be carried out only by qualified
maintenance personnel.
Even after the unit is disconnected from the mains, components inside the UPS system are still
connected to the battery packs which are potentially dangerous.
Before carrying out any kind of service and/or maintenance, disconnect the batteries and verify that
no current is present and no hazardous voltage exists in the terminals of high capability capacitor such as
BUS-capacitors.
Only persons are adequately familiar with batteries and with the required precautionary measures
may replace batteries and supervise operations. Unauthorized persons must be kept well away from the
batteries.
Verify that no voltage between the battery terminals and the ground is present before maintenance
or repair. In this product, the battery circuit is not isolated from the input voltage. Hazardous voltages may
occur between the battery terminals and the grounding/earthing.
Batteries may cause electric shock and have a high short-circuit current. Please remove all
wristwatches, rings and other metal person objects before maintenance or repair, and only use tools with
insulated grips and handles for maintaining or repairing.
When replace the batteries, install the same number and same type of batteries.
Do not attempt to dispose of batteries by burning them. This could cause battery explosion. The
batteries must be deposed according to local environmental regulations.
Do not open or destroy batteries. Escaping electrolyte can cause injury to the skin and eyes. It may
be toxic.
Please replace the fuse only with the same type and amperage in order to avoid fire hazards.
Do not disassemble the UPS system.

Chat with your PowerWalker VFI 60K CPG PF1 3/3 BX manual using AI

Get instant AI answers from your PowerWalker VFI 60K CPG PF1 3/3 BX manual

Ask anything about the PowerWalker VFI 60K CPG PF1 3/3 BX. Answers come from this manual, with the pages they are based on.

VFI 60K CPG PF1 3/3 BX Maintenance Schedule

Remind me when maintenance is due
Every 2 months
Recharge battery during storage at 40°C to 45°C

If stored between 40°C and 45°C, recharge the battery every 2 months for 1-2 hours.

Show in the manual (page 48)
Every 3 months
Recharge battery during storage at -25°C to 40°C

If stored between -25°C and 40°C, recharge the battery every 3 months for 1-2 hours.

Show in the manual (page 48)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend VFI 60K CPG PF1 3/3 BX?

Yes No

Frequently Asked Questions

A

BI stands for Battery Internal, meaning the unit comes with built-in batteries. BX denotes Battery External, indicating the unit has no internal batteries and requires an external battery pack connection for operation.

Is this answer helpful?

A

Yes, the PowerWalker series supports parallel operation. Multiple units can be connected to share the load, increasing total capacity. Proper synchronization and cabling are required for successful setup.

Is this answer helpful?

A

Navigate to the Control menu on the LCD screen and select Battery Test. Confirm the action to start the self-test. The system will evaluate battery health and display the results on the screen after completion.

Is this answer helpful?

A

If overloaded, the buzzer will beep twice every second. If the overload persists beyond specified limits, the UPS will automatically transfer to bypass mode or shut down to protect the unit and connected devices.

Is this answer helpful?

A

While designed for commercial and industrial use, it is not recommended for life-sustaining medical equipment unless specifically evaluated by a professional due to potential failure risks affecting safety.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Zero transfer time ensures uninterrupted power during grid failures
  • High efficiency of 95.5% reduces energy costs significantly
  • External battery option allows for extended runtime flexibility
  • Comprehensive LCD display provides detailed real-time diagnostics
  • Supports parallel operation for scalable power capacity
VS

Disadvantages

  • Installation requires specialized qualified electrical personnel
  • Requires careful handling of hazardous voltages during maintenance
  • Higher initial cost compared to offline or line-interactive units
  • Complex wiring diagrams may be challenging for untrained staff
  • Noise levels increase with higher capacity models up to 75dB
M: QW-35-FL

Product Specification

Type

Tower

Classification

VFI (On-Line)

Apparent Power

60 kVA

Active Power

60 kW

Voltage

480 V

Input

Dry Contact

Outputs

Dry Contact

Interfaces

USB, serial

Data Line Protection

N/A

Weight

238.10 lbs

Dimensions (WxDxH)

11.81x39.76x31.10 in

Features

LCD

M: QW-35-FL

Product Description

BlueWalker PowerWalker VFI 60K CPG PF1 3/3 BX Overview

The BlueWalker PowerWalker VFI 60K CPG PF1 3/3 BX represents a pinnacle in industrial uninterruptible power supply technology. Designed for critical environments, this unit delivers robust protection with a 60kVA capacity and a unity power factor output. Its external battery configuration allows for flexible runtime extensions, making it ideal for data centers, medical facilities, and large-scale industrial operations where continuous power is non-negotiable.

This sophisticated system features a Triple Conversion Online topology that ensures zero transfer time between utility power and battery backup. The integrated LCD interface provides real-time monitoring of voltage, frequency, load levels, and battery status. Users can easily navigate through control, measurement, and setting menus to customize operation parameters such as bypass ranges, ECO modes, and alarm thresholds. The inclusion of USB and serial communication ports facilitates seamless integration with monitoring software for automated shutdowns and remote management.

Safety is paramount in the design of this unit. It complies with strict international standards including IEC/EN 62040-1, ensuring high immunity against electromagnetic interference. The installation process requires qualified personnel to handle complex wiring, grounding, and backfeed protection systems. Once operational, the UPS offers advanced fault detection, displaying detailed error codes and warning messages to aid in rapid troubleshooting. Whether configured for single operation or parallel redundancy, the PowerWalker series guarantees reliable power delivery under any condition.

Key Operational Features

The device supports both standard and long-run models, accommodating various battery requirements. The intelligent slot allows for expansion modules, while the maintenance bypass switch enables service without interrupting the load. Regular self-tests and automatic battery calibration help maintain optimal performance over the lifespan of the equipment.

Important Notes

  • Always ensure proper grounding before connecting the unit to mains power.
  • Allow at least two hours for acclimatization if moving the unit from cold to warm environments.
  • Do not operate the UPS near flammable mixtures or life-sustaining equipment without specific risk assessment.
  • Keep the original packaging for future transportation to prevent damage.
M: QW-35-FL

© Copyright 2026 Manual.ly